在好例子网,分享、交流、成长!
您当前所在位置:首页C/C++ 开发实例嵌入式开发 → STM32F103-UART4和UART5透传

STM32F103-UART4和UART5透传

嵌入式开发

下载此实例
  • 开发语言:C/C++
  • 实例大小:3.38M
  • 下载次数:8
  • 浏览次数:57
  • 发布时间:2022-11-28
  • 实例类别:嵌入式开发
  • 发 布 人:harvey2021
  • 文件格式:.rar
  • 所需积分:2
 相关标签: STM32f103 STM32F1 STM32 F103 STM3

实例介绍

【实例简介】STM32F103-UART4和UART5透传

【实例截图】

from clipboard

【核心代码】

.
├── STM32F103-UART4和UART5透传
│   ├── STM32串口UART4
│   │   ├── CORE
│   │   │   ├── core_cm3.c
│   │   │   ├── core_cm3.h
│   │   │   ├── startup_stm32f10x_hd.s
│   │   │   └── startup_stm32f10x_md.s
│   │   ├── HARDWARE
│   │   │   ├── KEY
│   │   │   │   ├── key.c
│   │   │   │   └── key.h
│   │   │   └── LED
│   │   │       ├── led.c
│   │   │       └── led.h
│   │   ├── OBJ
│   │   │   ├── ExtDll.iex
│   │   │   ├── USART.axf
│   │   │   ├── USART.build_log.htm
│   │   │   ├── USART.hex
│   │   │   ├── USART.htm
│   │   │   ├── USART.lnp
│   │   │   ├── USART.plg
│   │   │   ├── USART.sct
│   │   │   ├── USART.tra
│   │   │   ├── USART_Target 1.dep
│   │   │   ├── core_cm3.crf
│   │   │   ├── core_cm3.d
│   │   │   ├── core_cm3.o
│   │   │   ├── delay.crf
│   │   │   ├── delay.d
│   │   │   ├── delay.o
│   │   │   ├── key.crf
│   │   │   ├── key.d
│   │   │   ├── key.o
│   │   │   ├── led.crf
│   │   │   ├── led.d
│   │   │   ├── led.o
│   │   │   ├── main.crf
│   │   │   ├── main.d
│   │   │   ├── main.o
│   │   │   ├── misc.crf
│   │   │   ├── misc.d
│   │   │   ├── misc.o
│   │   │   ├── startup_stm32f10x_hd.d
│   │   │   ├── startup_stm32f10x_hd.o
│   │   │   ├── stm32f10x_gpio.crf
│   │   │   ├── stm32f10x_gpio.d
│   │   │   ├── stm32f10x_gpio.o
│   │   │   ├── stm32f10x_it.crf
│   │   │   ├── stm32f10x_it.d
│   │   │   ├── stm32f10x_it.o
│   │   │   ├── stm32f10x_rcc.crf
│   │   │   ├── stm32f10x_rcc.d
│   │   │   ├── stm32f10x_rcc.o
│   │   │   ├── stm32f10x_usart.crf
│   │   │   ├── stm32f10x_usart.d
│   │   │   ├── stm32f10x_usart.o
│   │   │   ├── sys.crf
│   │   │   ├── sys.d
│   │   │   ├── sys.o
│   │   │   ├── system_stm32f10x.crf
│   │   │   ├── system_stm32f10x.d
│   │   │   ├── system_stm32f10x.o
│   │   │   ├── usart.crf
│   │   │   ├── usart.d
│   │   │   └── usart.o
│   │   ├── STM32F10x_FWLib
│   │   │   ├── inc
│   │   │   │   ├── misc.h
│   │   │   │   ├── stm32f10x_adc.h
│   │   │   │   ├── stm32f10x_bkp.h
│   │   │   │   ├── stm32f10x_can.h
│   │   │   │   ├── stm32f10x_cec.h
│   │   │   │   ├── stm32f10x_crc.h
│   │   │   │   ├── stm32f10x_dac.h
│   │   │   │   ├── stm32f10x_dbgmcu.h
│   │   │   │   ├── stm32f10x_dma.h
│   │   │   │   ├── stm32f10x_exti.h
│   │   │   │   ├── stm32f10x_flash.h
│   │   │   │   ├── stm32f10x_fsmc.h
│   │   │   │   ├── stm32f10x_gpio.h
│   │   │   │   ├── stm32f10x_i2c.h
│   │   │   │   ├── stm32f10x_iwdg.h
│   │   │   │   ├── stm32f10x_pwr.h
│   │   │   │   ├── stm32f10x_rcc.h
│   │   │   │   ├── stm32f10x_rtc.h
│   │   │   │   ├── stm32f10x_sdio.h
│   │   │   │   ├── stm32f10x_spi.h
│   │   │   │   ├── stm32f10x_tim.h
│   │   │   │   ├── stm32f10x_usart.h
│   │   │   │   └── stm32f10x_wwdg.h
│   │   │   └── src
│   │   │       ├── misc.c
│   │   │       ├── stm32f10x_adc.c
│   │   │       ├── stm32f10x_bkp.c
│   │   │       ├── stm32f10x_can.c
│   │   │       ├── stm32f10x_cec.c
│   │   │       ├── stm32f10x_crc.c
│   │   │       ├── stm32f10x_dac.c
│   │   │       ├── stm32f10x_dbgmcu.c
│   │   │       ├── stm32f10x_dma.c
│   │   │       ├── stm32f10x_exti.c
│   │   │       ├── stm32f10x_flash.c
│   │   │       ├── stm32f10x_fsmc.c
│   │   │       ├── stm32f10x_gpio.c
│   │   │       ├── stm32f10x_i2c.c
│   │   │       ├── stm32f10x_iwdg.c
│   │   │       ├── stm32f10x_pwr.c
│   │   │       ├── stm32f10x_rcc.c
│   │   │       ├── stm32f10x_rtc.c
│   │   │       ├── stm32f10x_sdio.c
│   │   │       ├── stm32f10x_spi.c
│   │   │       ├── stm32f10x_tim.c
│   │   │       ├── stm32f10x_usart.c
│   │   │       └── stm32f10x_wwdg.c
│   │   ├── SYSTEM
│   │   │   ├── delay
│   │   │   │   ├── delay.c
│   │   │   │   └── delay.h
│   │   │   ├── sys
│   │   │   │   ├── sys.c
│   │   │   │   └── sys.h
│   │   │   └── usart
│   │   │       ├── usart.c
│   │   │       └── usart.h
│   │   ├── UART.IAB
│   │   ├── UART.IAD
│   │   ├── UART.IMB
│   │   ├── UART.IMD
│   │   ├── UART.PFI
│   │   ├── UART.PO
│   │   ├── UART.PR
│   │   ├── UART.PRI
│   │   ├── UART.PS
│   │   ├── UART.SearchResults
│   │   ├── UART.WK3
│   │   ├── USER
│   │   │   ├── JLinkLog.txt
│   │   │   ├── JLinkSettings.ini
│   │   │   ├── USART.Uv2.bak
│   │   │   ├── USART.map
│   │   │   ├── USART.opt.bak
│   │   │   ├── USART.uvgui.Administrator
│   │   │   ├── USART.uvgui.Leo
│   │   │   ├── USART.uvgui_Administrator.bak
│   │   │   ├── USART.uvgui_Leo.bak
│   │   │   ├── USART.uvopt
│   │   │   ├── USART.uvproj
│   │   │   ├── USART_Target 1.dep
│   │   │   ├── USART_uvopt.bak
│   │   │   ├── USART_uvproj.bak
│   │   │   ├── main.c
│   │   │   ├── startup_stm32f10x_hd.lst
│   │   │   ├── stm32f10x.h
│   │   │   ├── stm32f10x_conf.h
│   │   │   ├── stm32f10x_it.c
│   │   │   ├── stm32f10x_it.h
│   │   │   ├── system_stm32f10x.c
│   │   │   └── system_stm32f10x.h
│   │   └── keilkilll.bat
│   └── STM32串口UART5
│       ├── CORE
│       │   ├── core_cm3.c
│       │   ├── core_cm3.h
│       │   ├── startup_stm32f10x_hd.s
│       │   └── startup_stm32f10x_md.s
│       ├── HARDWARE
│       │   ├── KEY
│       │   │   ├── key.c
│       │   │   └── key.h
│       │   └── LED
│       │       ├── led.c
│       │       └── led.h
│       ├── OBJ
│       │   ├── ExtDll.iex
│       │   ├── USART.axf
│       │   ├── USART.build_log.htm
│       │   ├── USART.hex
│       │   ├── USART.htm
│       │   ├── USART.lnp
│       │   ├── USART.plg
│       │   ├── USART.sct
│       │   ├── USART.tra
│       │   ├── USART_Target 1.dep
│       │   ├── core_cm3.crf
│       │   ├── core_cm3.d
│       │   ├── core_cm3.o
│       │   ├── delay.crf
│       │   ├── delay.d
│       │   ├── delay.o
│       │   ├── key.crf
│       │   ├── key.d
│       │   ├── key.o
│       │   ├── led.crf
│       │   ├── led.d
│       │   ├── led.o
│       │   ├── main.crf
│       │   ├── main.d
│       │   ├── main.o
│       │   ├── misc.crf
│       │   ├── misc.d
│       │   ├── misc.o
│       │   ├── startup_stm32f10x_hd.d
│       │   ├── startup_stm32f10x_hd.o
│       │   ├── stm32f10x_gpio.crf
│       │   ├── stm32f10x_gpio.d
│       │   ├── stm32f10x_gpio.o
│       │   ├── stm32f10x_it.crf
│       │   ├── stm32f10x_it.d
│       │   ├── stm32f10x_it.o
│       │   ├── stm32f10x_rcc.crf
│       │   ├── stm32f10x_rcc.d
│       │   ├── stm32f10x_rcc.o
│       │   ├── stm32f10x_usart.crf
│       │   ├── stm32f10x_usart.d
│       │   ├── stm32f10x_usart.o
│       │   ├── sys.crf
│       │   ├── sys.d
│       │   ├── sys.o
│       │   ├── system_stm32f10x.crf
│       │   ├── system_stm32f10x.d
│       │   ├── system_stm32f10x.o
│       │   ├── usart.crf
│       │   ├── usart.d
│       │   └── usart.o
│       ├── STM32F10x_FWLib
│       │   ├── inc
│       │   │   ├── misc.h
│       │   │   ├── stm32f10x_adc.h
│       │   │   ├── stm32f10x_bkp.h
│       │   │   ├── stm32f10x_can.h
│       │   │   ├── stm32f10x_cec.h
│       │   │   ├── stm32f10x_crc.h
│       │   │   ├── stm32f10x_dac.h
│       │   │   ├── stm32f10x_dbgmcu.h
│       │   │   ├── stm32f10x_dma.h
│       │   │   ├── stm32f10x_exti.h
│       │   │   ├── stm32f10x_flash.h
│       │   │   ├── stm32f10x_fsmc.h
│       │   │   ├── stm32f10x_gpio.h
│       │   │   ├── stm32f10x_i2c.h
│       │   │   ├── stm32f10x_iwdg.h
│       │   │   ├── stm32f10x_pwr.h
│       │   │   ├── stm32f10x_rcc.h
│       │   │   ├── stm32f10x_rtc.h
│       │   │   ├── stm32f10x_sdio.h
│       │   │   ├── stm32f10x_spi.h
│       │   │   ├── stm32f10x_tim.h
│       │   │   ├── stm32f10x_usart.h
│       │   │   └── stm32f10x_wwdg.h
│       │   └── src
│       │       ├── misc.c
│       │       ├── stm32f10x_adc.c
│       │       ├── stm32f10x_bkp.c
│       │       ├── stm32f10x_can.c
│       │       ├── stm32f10x_cec.c
│       │       ├── stm32f10x_crc.c
│       │       ├── stm32f10x_dac.c
│       │       ├── stm32f10x_dbgmcu.c
│       │       ├── stm32f10x_dma.c
│       │       ├── stm32f10x_exti.c
│       │       ├── stm32f10x_flash.c
│       │       ├── stm32f10x_fsmc.c
│       │       ├── stm32f10x_gpio.c
│       │       ├── stm32f10x_i2c.c
│       │       ├── stm32f10x_iwdg.c
│       │       ├── stm32f10x_pwr.c
│       │       ├── stm32f10x_rcc.c
│       │       ├── stm32f10x_rtc.c
│       │       ├── stm32f10x_sdio.c
│       │       ├── stm32f10x_spi.c
│       │       ├── stm32f10x_tim.c
│       │       ├── stm32f10x_usart.c
│       │       └── stm32f10x_wwdg.c
│       ├── SYSTEM
│       │   ├── delay
│       │   │   ├── delay.c
│       │   │   └── delay.h
│       │   ├── sys
│       │   │   ├── sys.c
│       │   │   └── sys.h
│       │   └── usart
│       │       ├── usart.c
│       │       └── usart.h
│       ├── UART.IAB
│       ├── UART.IAD
│       ├── UART.IMB
│       ├── UART.IMD
│       ├── UART.PFI
│       ├── UART.PO
│       ├── UART.PR
│       ├── UART.PRI
│       ├── UART.PS
│       ├── UART.SearchResults
│       ├── UART.WK3
│       ├── USER
│       │   ├── JLinkLog.txt
│       │   ├── JLinkSettings.ini
│       │   ├── USART.Uv2.bak
│       │   ├── USART.map
│       │   ├── USART.opt.bak
│       │   ├── USART.uvgui.Administrator
│       │   ├── USART.uvgui.Leo
│       │   ├── USART.uvgui_Administrator.bak
│       │   ├── USART.uvgui_Leo.bak
│       │   ├── USART.uvopt
│       │   ├── USART.uvproj
│       │   ├── USART_Target 1.dep
│       │   ├── USART_uvopt.bak
│       │   ├── USART_uvproj.bak
│       │   ├── main.c
│       │   ├── startup_stm32f10x_hd.lst
│       │   ├── stm32f10x.h
│       │   ├── stm32f10x_conf.h
│       │   ├── stm32f10x_it.c
│       │   ├── stm32f10x_it.h
│       │   ├── system_stm32f10x.c
│       │   └── system_stm32f10x.h
│       └── keilkilll.bat
└── 好例子网_STM32F103-UART4和UART5透传.rar

29 directories, 291 files


实例下载地址

STM32F103-UART4和UART5透传

不能下载?内容有错? 点击这里报错 + 投诉 + 提问

好例子网口号:伸出你的我的手 — 分享

网友评论

发表评论

(您的评论需要经过审核才能显示)

查看所有0条评论>>

小贴士

感谢您为本站写下的评论,您的评论对其它用户来说具有重要的参考价值,所以请认真填写。

  • 类似“顶”、“沙发”之类没有营养的文字,对勤劳贡献的楼主来说是令人沮丧的反馈信息。
  • 相信您也不想看到一排文字/表情墙,所以请不要反馈意义不大的重复字符,也请尽量不要纯表情的回复。
  • 提问之前请再仔细看一遍楼主的说明,或许是您遗漏了。
  • 请勿到处挖坑绊人、招贴广告。既占空间让人厌烦,又没人会搭理,于人于己都无利。

关于好例子网

本站旨在为广大IT学习爱好者提供一个非营利性互相学习交流分享平台。本站所有资源都可以被免费获取学习研究。本站资源来自网友分享,对搜索内容的合法性不具有预见性、识别性、控制性,仅供学习研究,请务必在下载后24小时内给予删除,不得用于其他任何用途,否则后果自负。基于互联网的特殊性,平台无法对用户传输的作品、信息、内容的权属或合法性、安全性、合规性、真实性、科学性、完整权、有效性等进行实质审查;无论平台是否已进行审查,用户均应自行承担因其传输的作品、信息、内容而可能或已经产生的侵权或权属纠纷等法律责任。本站所有资源不代表本站的观点或立场,基于网友分享,根据中国法律《信息网络传播权保护条例》第二十二与二十三条之规定,若资源存在侵权或相关问题请联系本站客服人员,点此联系我们。关于更多版权及免责申明参见 版权及免责申明

;
报警