在好例子网,分享、交流、成长!
您当前所在位置:首页C/C++ 开发实例常规C/C++编程 → SX1280定长包通信

SX1280定长包通信

常规C/C++编程

下载此实例
  • 开发语言:C/C++
  • 实例大小:1.64M
  • 下载次数:5
  • 浏览次数:43
  • 发布时间:2021-11-25
  • 实例类别:常规C/C++编程
  • 发 布 人:agaojsaa
  • 文件格式:.zip
  • 所需积分:10
 相关标签: 通信 12

实例介绍

【实例简介】SX1280定长包通信
【实例截图】
【核心代码】.
├── SX1280_DemoApp_V1_0-master
│   ├── SX1280_DemoApp
│   │   ├── Drivers
│   │   │   ├── CMSIS
│   │   │   │   ├── Device
│   │   │   │   │   └── ST
│   │   │   │   │       └── STM32L4xx
│   │   │   │   │           └── Include
│   │   │   │   │               ├── stm32l476xx.h
│   │   │   │   │               ├── stm32l4xx.h
│   │   │   │   │               └── system_stm32l4xx.h
│   │   │   │   └── Include
│   │   │   │       ├── cmsis_armcc.h
│   │   │   │       ├── cmsis_armclang.h
│   │   │   │       ├── cmsis_armclang_ltm.h
│   │   │   │       ├── cmsis_compiler.h
│   │   │   │       ├── cmsis_gcc.h
│   │   │   │       ├── cmsis_iccarm.h
│   │   │   │       ├── cmsis_version.h
│   │   │   │       ├── core_armv81mml.h
│   │   │   │       ├── core_armv8mbl.h
│   │   │   │       ├── core_armv8mml.h
│   │   │   │       ├── core_cm0.h
│   │   │   │       ├── core_cm0plus.h
│   │   │   │       ├── core_cm1.h
│   │   │   │       ├── core_cm23.h
│   │   │   │       ├── core_cm3.h
│   │   │   │       ├── core_cm33.h
│   │   │   │       ├── core_cm35p.h
│   │   │   │       ├── core_cm4.h
│   │   │   │       ├── core_cm7.h
│   │   │   │       ├── core_sc000.h
│   │   │   │       ├── core_sc300.h
│   │   │   │       ├── mpu_armv7.h
│   │   │   │       ├── mpu_armv8.h
│   │   │   │       └── tz_context.h
│   │   │   └── STM32L4xx_HAL_Driver
│   │   │       ├── Inc
│   │   │       │   ├── Legacy
│   │   │       │   │   └── stm32_hal_legacy.h
│   │   │       │   ├── stm32l4xx_hal.h
│   │   │       │   ├── stm32l4xx_hal_cortex.h
│   │   │       │   ├── stm32l4xx_hal_def.h
│   │   │       │   ├── stm32l4xx_hal_dma.h
│   │   │       │   ├── stm32l4xx_hal_dma_ex.h
│   │   │       │   ├── stm32l4xx_hal_exti.h
│   │   │       │   ├── stm32l4xx_hal_flash.h
│   │   │       │   ├── stm32l4xx_hal_flash_ex.h
│   │   │       │   ├── stm32l4xx_hal_flash_ramfunc.h
│   │   │       │   ├── stm32l4xx_hal_gpio.h
│   │   │       │   ├── stm32l4xx_hal_gpio_ex.h
│   │   │       │   ├── stm32l4xx_hal_i2c.h
│   │   │       │   ├── stm32l4xx_hal_i2c_ex.h
│   │   │       │   ├── stm32l4xx_hal_lptim.h
│   │   │       │   ├── stm32l4xx_hal_pwr.h
│   │   │       │   ├── stm32l4xx_hal_pwr_ex.h
│   │   │       │   ├── stm32l4xx_hal_rcc.h
│   │   │       │   ├── stm32l4xx_hal_rcc_ex.h
│   │   │       │   ├── stm32l4xx_hal_spi.h
│   │   │       │   ├── stm32l4xx_hal_spi_ex.h
│   │   │       │   ├── stm32l4xx_hal_tim.h
│   │   │       │   ├── stm32l4xx_hal_tim_ex.h
│   │   │       │   ├── stm32l4xx_hal_uart.h
│   │   │       │   └── stm32l4xx_hal_uart_ex.h
│   │   │       └── Src
│   │   │           ├── stm32l4xx_hal.c
│   │   │           ├── stm32l4xx_hal_cortex.c
│   │   │           ├── stm32l4xx_hal_dma.c
│   │   │           ├── stm32l4xx_hal_dma_ex.c
│   │   │           ├── stm32l4xx_hal_exti.c
│   │   │           ├── stm32l4xx_hal_flash.c
│   │   │           ├── stm32l4xx_hal_flash_ex.c
│   │   │           ├── stm32l4xx_hal_flash_ramfunc.c
│   │   │           ├── stm32l4xx_hal_gpio.c
│   │   │           ├── stm32l4xx_hal_i2c.c
│   │   │           ├── stm32l4xx_hal_i2c_ex.c
│   │   │           ├── stm32l4xx_hal_lptim.c
│   │   │           ├── stm32l4xx_hal_pwr.c
│   │   │           ├── stm32l4xx_hal_pwr_ex.c
│   │   │           ├── stm32l4xx_hal_rcc.c
│   │   │           ├── stm32l4xx_hal_rcc_ex.c
│   │   │           ├── stm32l4xx_hal_spi.c
│   │   │           ├── stm32l4xx_hal_spi_ex.c
│   │   │           ├── stm32l4xx_hal_tim.c
│   │   │           ├── stm32l4xx_hal_tim_ex.c
│   │   │           ├── stm32l4xx_hal_uart.c
│   │   │           └── stm32l4xx_hal_uart_ex.c
│   │   ├── EWARM
│   │   │   ├── Project.eww
│   │   │   ├── SX1280_L476RG_DemoApp
│   │   │   │   ├── Exe
│   │   │   │   │   ├── SX1280_L476RG_DemoApp.hex
│   │   │   │   │   ├── SX1280_L476RG_DemoApp.out
│   │   │   │   │   └── SX1280_L476RG_DemoApp.sim
│   │   │   │   └── List
│   │   │   │       └── SX1280_L476RG_DemoApp.map
│   │   │   ├── SX1280_L476RG_DemoApp.dep
│   │   │   ├── SX1280_L476RG_DemoApp.ewd
│   │   │   ├── SX1280_L476RG_DemoApp.ewp
│   │   │   ├── SX1280_L476RG_DemoApp.ewt
│   │   │   ├── settings
│   │   │   │   ├── Project.wsdt
│   │   │   │   ├── Project.wspos
│   │   │   │   ├── SX1280_L476RG_DemoApp.SX1280_L476RG_DemoApp.cspy.bat
│   │   │   │   ├── SX1280_L476RG_DemoApp.SX1280_L476RG_DemoApp.driver.xcl
│   │   │   │   ├── SX1280_L476RG_DemoApp.SX1280_L476RG_DemoApp.general.xcl
│   │   │   │   ├── SX1280_L476RG_DemoApp.crun
│   │   │   │   ├── SX1280_L476RG_DemoApp.dbgdt
│   │   │   │   └── SX1280_L476RG_DemoApp.dni
│   │   │   ├── startup_stm32l476xx.s
│   │   │   ├── stm32l476xx_flash.icf
│   │   │   └── stm32l476xx_sram.icf
│   │   ├── Inc
│   │   │   ├── gpio.h
│   │   │   ├── i2c.h
│   │   │   ├── lptim.h
│   │   │   ├── main.h
│   │   │   ├── spi.h
│   │   │   ├── stm32l4xx_hal_conf.h
│   │   │   ├── stm32l4xx_it.h
│   │   │   └── usart.h
│   │   ├── MDK-ARM
│   │   │   ├── DebugConfig
│   │   │   │   └── SX1280_L476RG_DemoApp_STM32L476RGTx.dbgconf
│   │   │   ├── EventRecorderStub.scvd
│   │   │   ├── RTE
│   │   │   │   └── _SX1280_L476RG_DemoApp
│   │   │   │       └── RTE_Components.h
│   │   │   ├── SX1280_L476RG_DemoApp.uvoptx
│   │   │   ├── SX1280_L476RG_DemoApp.uvprojx
│   │   │   ├── startup_stm32l476xx.lst
│   │   │   └── startup_stm32l476xx.s
│   │   ├── Makefile
│   │   ├── SMTC_App
│   │   │   ├── main_pingpong.c
│   │   │   ├── main_pingpong.h
│   │   │   └── main_ranging.c
│   │   ├── SMTC_Drivers
│   │   │   ├── DemoApp
│   │   │   │   └── Demo ranging
│   │   │   │       ├── FreqLUT.h
│   │   │   │       ├── RangingDisplay.c
│   │   │   │       ├── RangingDisplay.h
│   │   │   │       ├── demoRanging.c
│   │   │   │       ├── demoRanging.h
│   │   │   │       ├── radioTypes.h
│   │   │   │       ├── timoueter.c
│   │   │   │       └── timoueter.h
│   │   │   ├── hw-hal
│   │   │   │   ├── inc
│   │   │   │   │   ├── boards
│   │   │   │   │   │   ├── boards.h
│   │   │   │   │   │   ├── nucleo-l053r8.h
│   │   │   │   │   │   ├── nucleo-l152re.h
│   │   │   │   │   │   └── nucleo-l476rg.h
│   │   │   │   │   ├── hw-gpio.h
│   │   │   │   │   ├── hw-i2c.h
│   │   │   │   │   ├── hw-lptim.h
│   │   │   │   │   ├── hw-rtc.h
│   │   │   │   │   ├── hw-spi.h
│   │   │   │   │   ├── hw-usart.h
│   │   │   │   │   └── hw.h
│   │   │   │   └── src
│   │   │   │       ├── hw-gpio.c
│   │   │   │       ├── hw-i2c.c
│   │   │   │       ├── hw-lptim.c
│   │   │   │       ├── hw-rtc.c
│   │   │   │       ├── hw-spi.c
│   │   │   │       ├── hw-usart.c
│   │   │   │       ├── hw.c
│   │   │   │       └── utilities.c
│   │   │   ├── peripherals
│   │   │   │   ├── rf_switch
│   │   │   │   │   ├── rf_switch_cg2214m6.c
│   │   │   │   │   └── rf_switch_cg2214m6.h
│   │   │   │   └── sx9306
│   │   │   │       ├── sx9306.c
│   │   │   │       └── sx9306.h
│   │   │   ├── sx1280-driver-c
│   │   │   │   ├── RangingCorrection.h
│   │   │   │   ├── build
│   │   │   │   │   ├── HW-HAL
│   │   │   │   │   │   ├── hw-gpio.c
│   │   │   │   │   │   ├── hw-gpio.h
│   │   │   │   │   │   ├── hw-spi.c
│   │   │   │   │   │   ├── hw-spi.h
│   │   │   │   │   │   ├── hw-uart.c
│   │   │   │   │   │   ├── hw-uart.h
│   │   │   │   │   │   ├── hw.c
│   │   │   │   │   │   ├── hw.h
│   │   │   │   │   │   └── stm32l4xx_it.c
│   │   │   │   │   └── Inc
│   │   │   │   │       ├── boards
│   │   │   │   │       │   ├── boards.h
│   │   │   │   │       │   └── nucleo-l476rg.h
│   │   │   │   │       ├── main.h
│   │   │   │   │       ├── stm32l4xx_hal_conf.h
│   │   │   │   │       └── stm32l4xx_it.h
│   │   │   │   ├── radio.h
│   │   │   │   ├── rangingCorrection
│   │   │   │   │   ├── rangingCorrectionSF10BW0400.h
│   │   │   │   │   ├── rangingCorrectionSF10BW0800.h
│   │   │   │   │   ├── rangingCorrectionSF10BW1600.h
│   │   │   │   │   ├── rangingCorrectionSF5BW0400.h
│   │   │   │   │   ├── rangingCorrectionSF5BW0800.h
│   │   │   │   │   ├── rangingCorrectionSF5BW1600.h
│   │   │   │   │   ├── rangingCorrectionSF6BW0400.h
│   │   │   │   │   ├── rangingCorrectionSF6BW0800.h
│   │   │   │   │   ├── rangingCorrectionSF6BW1600.h
│   │   │   │   │   ├── rangingCorrectionSF7BW0400.h
│   │   │   │   │   ├── rangingCorrectionSF7BW0800.h
│   │   │   │   │   ├── rangingCorrectionSF7BW1600.h
│   │   │   │   │   ├── rangingCorrectionSF8BW0400.h
│   │   │   │   │   ├── rangingCorrectionSF8BW0800.h
│   │   │   │   │   ├── rangingCorrectionSF8BW1600.h
│   │   │   │   │   ├── rangingCorrectionSF9BW0400.h
│   │   │   │   │   ├── rangingCorrectionSF9BW0800.h
│   │   │   │   │   ├── rangingCorrectionSF9BW1600.h
│   │   │   │   │   └── rangingCorrection_defines.h
│   │   │   │   ├── readme.md
│   │   │   │   ├── sx1280-hal.c
│   │   │   │   ├── sx1280-hal.h
│   │   │   │   ├── sx1280.c
│   │   │   │   └── sx1280.h
│   │   │   └── utilities.h
│   │   ├── STM32L476RGTx_FLASH.ld
│   │   ├── SX1280_L476RG_DemoApp.ioc
│   │   ├── Src
│   │   │   ├── gpio.c
│   │   │   ├── i2c.c
│   │   │   ├── lptim.c
│   │   │   ├── main.c
│   │   │   ├── spi.c
│   │   │   ├── stm32l4xx_hal_msp.c
│   │   │   ├── stm32l4xx_it.c
│   │   │   ├── system_stm32l4xx.c
│   │   │   └── usart.c
│   │   ├── startup_stm32l476xx.s
│   │   └── sx1280_vscode.code-workspace
│   ├── SX1280_DemoApp.7z
│   ├── SX1280_Junfeng20210918
│   │   ├── Drivers
│   │   │   └── sx1280-driver-c
│   │   │       ├── RangingCorrection.h
│   │   │       ├── build
│   │   │       │   ├── HW-HAL
│   │   │       │   │   ├── hw-gpio.c
│   │   │       │   │   ├── hw-gpio.h
│   │   │       │   │   ├── hw-spi.c
│   │   │       │   │   ├── hw-spi.h
│   │   │       │   │   ├── hw-uart.c
│   │   │       │   │   ├── hw-uart.h
│   │   │       │   │   ├── hw.c
│   │   │       │   │   ├── hw.h
│   │   │       │   │   └── stm32l4xx_it.c
│   │   │       │   └── Inc
│   │   │       │       ├── boards
│   │   │       │       │   ├── boards.h
│   │   │       │       │   └── nucleo-l476rg.h
│   │   │       │       ├── main.h
│   │   │       │       ├── stm32l4xx_hal_conf.h
│   │   │       │       └── stm32l4xx_it.h
│   │   │       ├── changelog.md
│   │   │       ├── main_pingpong.c
│   │   │       ├── main_pingpong.h
│   │   │       ├── radio.h
│   │   │       ├── rangingCorrection
│   │   │       │   ├── rangingCorrectionSF10BW0400.h
│   │   │       │   ├── rangingCorrectionSF10BW0800.h
│   │   │       │   ├── rangingCorrectionSF10BW1600.h
│   │   │       │   ├── rangingCorrectionSF5BW0400.h
│   │   │       │   ├── rangingCorrectionSF5BW0800.h
│   │   │       │   ├── rangingCorrectionSF5BW1600.h
│   │   │       │   ├── rangingCorrectionSF6BW0400.h
│   │   │       │   ├── rangingCorrectionSF6BW0800.h
│   │   │       │   ├── rangingCorrectionSF6BW1600.h
│   │   │       │   ├── rangingCorrectionSF7BW0400.h
│   │   │       │   ├── rangingCorrectionSF7BW0800.h
│   │   │       │   ├── rangingCorrectionSF7BW1600.h
│   │   │       │   ├── rangingCorrectionSF8BW0400.h
│   │   │       │   ├── rangingCorrectionSF8BW0800.h
│   │   │       │   ├── rangingCorrectionSF8BW1600.h
│   │   │       │   ├── rangingCorrectionSF9BW0400.h
│   │   │       │   ├── rangingCorrectionSF9BW0800.h
│   │   │       │   ├── rangingCorrectionSF9BW1600.h
│   │   │       │   └── rangingCorrection_defines.h
│   │   │       ├── readme.md
│   │   │       ├── sx1280-hal.c
│   │   │       ├── sx1280-hal.h
│   │   │       ├── sx1280.c
│   │   │       ├── sx1280.h
│   │   │       ├── sx1280_mid.c
│   │   │       └── sx1280_mid.h
│   │   ├── EWARM
│   │   │   ├── Project.eww
│   │   │   ├── SX1280_Junfeng
│   │   │   │   ├── Exe
│   │   │   │   │   ├── SX1280_Junfeng.hex
│   │   │   │   │   ├── SX1280_Junfeng.out
│   │   │   │   │   └── SX1280_Junfeng.sim
│   │   │   │   └── List
│   │   │   │       └── SX1280_Junfeng.map
│   │   │   ├── SX1280_Junfeng.dep
│   │   │   ├── SX1280_Junfeng.ewd
│   │   │   ├── SX1280_Junfeng.ewp
│   │   │   ├── SX1280_Junfeng.ewt
│   │   │   ├── settings
│   │   │   │   ├── Project.wsdt
│   │   │   │   ├── Project.wspos
│   │   │   │   ├── SX1280_Junfeng.SX1280_Junfeng.cspy.bat
│   │   │   │   ├── SX1280_Junfeng.SX1280_Junfeng.driver.xcl
│   │   │   │   ├── SX1280_Junfeng.SX1280_Junfeng.general.xcl
│   │   │   │   ├── SX1280_Junfeng.crun
│   │   │   │   ├── SX1280_Junfeng.dbgdt
│   │   │   │   └── SX1280_Junfeng.dni
│   │   │   ├── startup_stm32l476xx.s
│   │   │   ├── stm32l476xx_flash.icf
│   │   │   └── stm32l476xx_sram.icf
│   │   ├── Inc
│   │   │   ├── main.h
│   │   │   ├── stm32l4xx_hal_conf.h
│   │   │   └── stm32l4xx_it.h
│   │   ├── STM32L476RGTx_FLASH.ld
│   │   ├── SX1280_Junfeng.ioc
│   │   ├── Src
│   │   │   ├── main.c
│   │   │   ├── stm32l4xx_hal_msp.c
│   │   │   ├── stm32l4xx_it.c
│   │   │   └── system_stm32l4xx.c
│   │   └── startup_stm32l476xx.s
│   └── readme.md
└── 好例子网_SX1280_DemoApp_V1_0.zip

56 directories, 276 files


标签: 通信 12

实例下载地址

SX1280定长包通信

不能下载?内容有错? 点击这里报错 + 投诉 + 提问

好例子网口号:伸出你的我的手 — 分享

网友评论

发表评论

(您的评论需要经过审核才能显示)

查看所有0条评论>>

小贴士

感谢您为本站写下的评论,您的评论对其它用户来说具有重要的参考价值,所以请认真填写。

  • 类似“顶”、“沙发”之类没有营养的文字,对勤劳贡献的楼主来说是令人沮丧的反馈信息。
  • 相信您也不想看到一排文字/表情墙,所以请不要反馈意义不大的重复字符,也请尽量不要纯表情的回复。
  • 提问之前请再仔细看一遍楼主的说明,或许是您遗漏了。
  • 请勿到处挖坑绊人、招贴广告。既占空间让人厌烦,又没人会搭理,于人于己都无利。

关于好例子网

本站旨在为广大IT学习爱好者提供一个非营利性互相学习交流分享平台。本站所有资源都可以被免费获取学习研究。本站资源来自网友分享,对搜索内容的合法性不具有预见性、识别性、控制性,仅供学习研究,请务必在下载后24小时内给予删除,不得用于其他任何用途,否则后果自负。基于互联网的特殊性,平台无法对用户传输的作品、信息、内容的权属或合法性、安全性、合规性、真实性、科学性、完整权、有效性等进行实质审查;无论平台是否已进行审查,用户均应自行承担因其传输的作品、信息、内容而可能或已经产生的侵权或权属纠纷等法律责任。本站所有资源不代表本站的观点或立场,基于网友分享,根据中国法律《信息网络传播权保护条例》第二十二与二十三条之规定,若资源存在侵权或相关问题请联系本站客服人员,点此联系我们。关于更多版权及免责申明参见 版权及免责申明

;
报警