在好例子网,分享、交流、成长!
您当前所在位置:首页Others 开发实例一般编程问题 → (STM32)ENC28J60网络模块实验

(STM32)ENC28J60网络模块实验

一般编程问题

下载此实例
  • 开发语言:Others
  • 实例大小:8.92M
  • 下载次数:7
  • 浏览次数:81
  • 发布时间:2020-09-04
  • 实例类别:一般编程问题
  • 发 布 人:robot666
  • 文件格式:.rar
  • 所需积分:2
 

实例介绍

【实例简介】
开机检测ENC28J60,如果检测不成功,则提示报错。在成功检测到ENC28J60之后,初始化uIP,并设置IP地址(192.168.1.16)等,然后监听80端口和1200端口,并尝试连接远程1400端口,80端口用于实现WEB Server功能,1200端口用于实现TCP Server功能,连接1400端口实现TCP Client功能。此时,我们在电脑浏览器输入http://192.168.1.16 ,就可以登录到一个界面,该界面可以控制开发板上两个LED灯的亮灭,还会显示开发板的当前时间以及开发板STM32芯片的温度(每10秒自动刷新一次)。另外,我们通过网络调试软件(做TCP Serv
【实例截图】
【核心代码】
ENC28J60网络模块实验--
└── ENC28J60网络模块实验--
├── CORE
│   ├── core_cm3.c
│   ├── core_cm3.h
│   ├── startup_stm32f10x_hd.s
│   └── startup_stm32f10x_md.s
├── ENC28J60试验讲解-库函数版本.pdf
├── HARDWARE
│   ├── ADC
│   │   ├── adc.c
│   │   └── adc.h
│   ├── ENC28J60
│   │   ├── enc28j60.c
│   │   └── enc28j60.h
│   ├── ITEMP
│   │   ├── tsensor.c
│   │   └── tsensor.h
│   ├── KEY
│   │   ├── key.c
│   │   └── key.h
│   ├── LCD
│   │   ├── font.h
│   │   ├── lcd.c
│   │   └── lcd.h
│   ├── LED
│   │   ├── led.c
│   │   └── led.h
│   ├── RTC
│   │   ├── rtc.c
│   │   └── rtc.h
│   ├── SPI
│   │   ├── spi.c
│   │   └── spi.h
│   └── TIMER
│   ├── timerx.c
│   └── timerx.h
├── keilkilll.bat
├── OBJ
│   ├── adc.crf
│   ├── adc.d
│   ├── adc.o
│   ├── clock-arch.crf
│   ├── clock-arch.d
│   ├── clock-arch.o
│   ├── core_cm3.crf
│   ├── core_cm3.d
│   ├── core_cm3.o
│   ├── delay.crf
│   ├── delay.d
│   ├── delay.o
│   ├── ENC28J60.axf
│   ├── ENC28J60.build_log.htm
│   ├── enc28j60.crf
│   ├── enc28j60.d
│   ├── ENC28J60.hex
│   ├── ENC28J60.htm
│   ├── ENC28J60.lnp
│   ├── enc28j60.o
│   ├── ENC28J60.sct
│   ├── ENC28J60_Target 1.dep
│   ├── httpd-cgi.crf
│   ├── httpd-cgi.d
│   ├── httpd-cgi.o
│   ├── httpd.crf
│   ├── httpd.d
│   ├── httpd-fs.crf
│   ├── httpd-fs.d
│   ├── httpd-fs.o
│   ├── httpd.o
│   ├── http-strings.crf
│   ├── http-strings.d
│   ├── http-strings.o
│   ├── key.crf
│   ├── key.d
│   ├── key.o
│   ├── lcd.crf
│   ├── lcd.d
│   ├── lcd.o
│   ├── led.crf
│   ├── led.d
│   ├── led.o
│   ├── main.crf
│   ├── main.d
│   ├── main.o
│   ├── misc.crf
│   ├── misc.d
│   ├── misc.o
│   ├── psock.crf
│   ├── psock.d
│   ├── psock.o
│   ├── rtc.crf
│   ├── rtc.d
│   ├── rtc.o
│   ├── spi.crf
│   ├── spi.d
│   ├── spi.o
│   ├── startup_stm32f10x_hd.d
│   ├── startup_stm32f10x_hd.o
│   ├── stm32f10x_adc.crf
│   ├── stm32f10x_adc.d
│   ├── stm32f10x_adc.o
│   ├── stm32f10x_bkp.crf
│   ├── stm32f10x_bkp.d
│   ├── stm32f10x_bkp.o
│   ├── stm32f10x_dbgmcu.crf
│   ├── stm32f10x_dbgmcu.d
│   ├── stm32f10x_dbgmcu.o
│   ├── stm32f10x_fsmc.crf
│   ├── stm32f10x_fsmc.d
│   ├── stm32f10x_fsmc.o
│   ├── stm32f10x_gpio.crf
│   ├── stm32f10x_gpio.d
│   ├── stm32f10x_gpio.o
│   ├── stm32f10x_it.crf
│   ├── stm32f10x_it.d
│   ├── stm32f10x_it.o
│   ├── stm32f10x_pwr.crf
│   ├── stm32f10x_pwr.d
│   ├── stm32f10x_pwr.o
│   ├── stm32f10x_rcc.crf
│   ├── stm32f10x_rcc.d
│   ├── stm32f10x_rcc.o
│   ├── stm32f10x_rtc.crf
│   ├── stm32f10x_rtc.d
│   ├── stm32f10x_rtc.o
│   ├── stm32f10x_spi.crf
│   ├── stm32f10x_spi.d
│   ├── stm32f10x_spi.o
│   ├── stm32f10x_tim.crf
│   ├── stm32f10x_tim.d
│   ├── stm32f10x_tim.o
│   ├── stm32f10x_usart.crf
│   ├── stm32f10x_usart.d
│   ├── stm32f10x_usart.o
│   ├── sys.crf
│   ├── sys.d
│   ├── sys.o
│   ├── system_stm32f10x.crf
│   ├── system_stm32f10x.d
│   ├── system_stm32f10x.o
│   ├── tapdev.crf
│   ├── tapdev.d
│   ├── tapdev.o
│   ├── tcp_client_demo.crf
│   ├── tcp_client_demo.d
│   ├── tcp_client_demo.o
│   ├── tcp_demo.crf
│   ├── tcp_demo.d
│   ├── tcp_demo.o
│   ├── tcp_server_demo.crf
│   ├── tcp_server_demo.d
│   ├── tcp_server_demo.o
│   ├── timer.crf
│   ├── timer.d
│   ├── timer.o
│   ├── timerx.crf
│   ├── timerx.d
│   ├── timerx.o
│   ├── tsensor.crf
│   ├── tsensor.d
│   ├── tsensor.o
│   ├── uip_arp.crf
│   ├── uip_arp.d
│   ├── uip_arp.o
│   ├── uip.crf
│   ├── uip.d
│   ├── uip-fw.crf
│   ├── uip-fw.d
│   ├── uip-fw.o
│   ├── uiplib.crf
│   ├── uiplib.d
│   ├── uiplib.o
│   ├── uip-neighbor.crf
│   ├── uip-neighbor.d
│   ├── uip-neighbor.o
│   ├── uip.o
│   ├── uip-split.crf
│   ├── uip-split.d
│   ├── uip-split.o
│   ├── usart.crf
│   ├── usart.d
│   ├── usart.o
│   ├── usmart_config.crf
│   ├── usmart_config.d
│   ├── usmart_config.o
│   ├── usmart.crf
│   ├── usmart.d
│   ├── usmart.o
│   ├── usmart_str.crf
│   ├── usmart_str.d
│   └── usmart_str.o
├── STM32F10x_FWLib
│   ├── inc
│   │   ├── misc.h
│   │   ├── stm32f10x_adc.h
│   │   ├── stm32f10x_bkp.h
│   │   ├── stm32f10x_can.h
│   │   ├── stm32f10x_cec.h
│   │   ├── stm32f10x_crc.h
│   │   ├── stm32f10x_dac.h
│   │   ├── stm32f10x_dbgmcu.h
│   │   ├── stm32f10x_dma.h
│   │   ├── stm32f10x_exti.h
│   │   ├── stm32f10x_flash.h
│   │   ├── stm32f10x_fsmc.h
│   │   ├── stm32f10x_gpio.h
│   │   ├── stm32f10x_i2c.h
│   │   ├── stm32f10x_iwdg.h
│   │   ├── stm32f10x_pwr.h
│   │   ├── stm32f10x_rcc.h
│   │   ├── stm32f10x_rtc.h
│   │   ├── stm32f10x_sdio.h
│   │   ├── stm32f10x_spi.h
│   │   ├── stm32f10x_tim.h
│   │   ├── stm32f10x_usart.h
│   │   └── stm32f10x_wwdg.h
│   └── src
│   ├── misc.c
│   ├── stm32f10x_adc.c
│   ├── stm32f10x_bkp.c
│   ├── stm32f10x_can.c
│   ├── stm32f10x_cec.c
│   ├── stm32f10x_crc.c
│   ├── stm32f10x_dac.c
│   ├── stm32f10x_dbgmcu.c
│   ├── stm32f10x_dma.c
│   ├── stm32f10x_exti.c
│   ├── stm32f10x_flash.c
│   ├── stm32f10x_fsmc.c
│   ├── stm32f10x_gpio.c
│   ├── stm32f10x_i2c.c
│   ├── stm32f10x_iwdg.c
│   ├── stm32f10x_pwr.c
│   ├── stm32f10x_rcc.c
│   ├── stm32f10x_rtc.c
│   ├── stm32f10x_sdio.c
│   ├── stm32f10x_spi.c
│   ├── stm32f10x_tim.c
│   ├── stm32f10x_usart.c
│   └── stm32f10x_wwdg.c
├── SYSTEM
│   ├── delay
│   │   ├── delay.c
│   │   └── delay.h
│   ├── sys
│   │   ├── sys.c
│   │   └── sys.h
│   └── usart
│   ├── usart.c
│   └── usart.h
├── uIP-1.0
│   ├── apps
│   │   ├── dhcpc
│   │   │   ├── dhcpc.c
│   │   │   ├── dhcpc.h
│   │   │   └── Makefile.dhcpc
│   │   ├── hello-world
│   │   │   ├── hello-world.c
│   │   │   ├── hello-world.h
│   │   │   └── Makefile.hello-world
│   │   ├── README.txt
│   │   ├── resolv
│   │   │   ├── Makefile.resolv
│   │   │   ├── resolv.c
│   │   │   └── resolv.h
│   │   ├── smtp
│   │   │   ├── Makefile.smtp
│   │   │   ├── makestrings
│   │   │   ├── smtp.c
│   │   │   ├── smtp.h
│   │   │   ├── smtp-strings
│   │   │   ├── smtp-strings.c
│   │   │   └── smtp-strings.h
│   │   ├── telnetd
│   │   │   ├── Makefile.telnetd
│   │   │   ├── shell.c
│   │   │   ├── shell.h
│   │   │   ├── telnetd.c
│   │   │   └── telnetd.h
│   │   ├── webclient
│   │   │   ├── Makefile.webclient
│   │   │   ├── makestrings
│   │   │   ├── webclient.c
│   │   │   ├── webclient.h
│   │   │   ├── webclient-strings
│   │   │   ├── webclient-strings.c
│   │   │   └── webclient-strings.h
│   │   └── webserver
│   │   ├── httpd.c
│   │   ├── httpd-cgi.c
│   │   ├── httpd-cgi.h
│   │   ├── httpd-fs
│   │   │   ├── fade.png
│   │   │   ├── files.shtml
│   │   │   ├── processes.shtml
│   │   │   ├── stats.shtml
│   │   │   ├── style.css
│   │   │   └── tcp.shtml
│   │   ├── httpd-fs.c
│   │   ├── httpd-fsdata.c
│   │   ├── httpd-fsdata.h
│   │   ├── httpd-fs.h
│   │   ├── httpd.h
│   │   ├── http-strings
│   │   ├── http-strings.c
│   │   ├── http-strings.h
│   │   ├── Makefile.webserver
│   │   ├── makefsdata
│   │   ├── makestrings
│   │   └── webserver.h
│   ├── doc
│   │   ├── Doxyfile
│   │   ├── doxygen.sty
│   │   ├── example-mainloop-with-arp.c
│   │   ├── example-mainloop-without-arp.c
│   │   ├── examples.txt
│   │   ├── header.tex
│   │   ├── html
│   │   │   ├── doxygen.css
│   │   │   ├── doxygen.png
│   │   │   ├── ftv2blank.png
│   │   │   ├── ftv2doc.png
│   │   │   ├── ftv2folderclosed.png
│   │   │   ├── ftv2folderopen.png
│   │   │   ├── ftv2lastnode.png
│   │   │   ├── ftv2link.png
│   │   │   ├── ftv2mlastnode.png
│   │   │   ├── ftv2mnode.png
│   │   │   ├── ftv2node.png
│   │   │   ├── ftv2plastnode.png
│   │   │   ├── ftv2pnode.png
│   │   │   ├── ftv2vertline.png
│   │   │   ├── index.hhc
│   │   │   ├── index.hhk
│   │   │   ├── index.hhp
│   │   │   ├── tab_b.gif
│   │   │   ├── tab_l.gif
│   │   │   ├── tab_r.gif
│   │   │   └── tabs.css
│   │   ├── Makefile
│   │   ├── mobisys2003.pdf
│   │   ├── pt-doc.txt
│   │   ├── README
│   │   ├── sicslogo.pdf
│   │   ├── uip-code-style.c
│   │   ├── uip-code-style.txt
│   │   ├── uip-doc.txt
│   │   └── uip-refman.pdf
│   ├── lib
│   │   ├── memb.c
│   │   └── memb.h
│   ├── README.txt
│   ├── uip
│   │   ├── clock.h
│   │   ├── lc-addrlabels.h
│   │   ├── lc.h
│   │   ├── lc-switch.h
│   │   ├── Makefile.include
│   │   ├── psock.c
│   │   ├── psock.h
│   │   ├── pt.h
│   │   ├── timer.c
│   │   ├── timer.h
│   │   ├── uip_arch.h
│   │   ├── uip_arp.c
│   │   ├── uip_arp.h
│   │   ├── uip.c
│   │   ├── uip-fw.c
│   │   ├── uip-fw.h
│   │   ├── uip.h
│   │   ├── uiplib.c
│   │   ├── uiplib.h
│   │   ├── uip-neighbor.c
│   │   ├── uip-neighbor.h
│   │   ├── uipopt.h
│   │   ├── uip-split.c
│   │   └── uip-split.h
│   ├── uip-1.0-changelog.txt
│   └── unix
│   ├── clock-arch.c
│   ├── clock-arch.h
│   ├── main.c
│   ├── Makefile
│   ├── tapdev.c
│   ├── tapdev.h
│   └── uip-conf.h
├── uIP-APP
│   ├── clock-arch.c
│   ├── clock-arch.h
│   ├── tapdev.c
│   ├── tapdev.h
│   ├── tcp_client_demo.c
│   ├── tcp_demo.c
│   ├── tcp_demo.h
│   ├── tcp_server_demo.c
│   └── uip-conf.h
├── USER
│   ├── ENC28J60.map
│   ├── ENC28J60.uvgui.Administrator
│   ├── ENC28J60.uvguix.Administrator
│   ├── ENC28J60.uvopt
│   ├── ENC28J60.uvoptx
│   ├── ENC28J60.uvproj.saved_uv4
│   ├── ENC28J60.uvprojx
│   ├── main.c
│   ├── startup_stm32f10x_hd.lst
│   ├── stm32f10x_conf.h
│   ├── stm32f10x.h
│   ├── stm32f10x_it.c
│   ├── stm32f10x_it.h
│   ├── system_stm32f10x.c
│   └── system_stm32f10x.h
├── USMART
│   ├── readme.txt
│   ├── usmart.c
│   ├── usmart_config.c
│   ├── usmart.h
│   ├── usmart_str.c
│   └── usmart_str.h
└── 网络调试工具
├── USR-TCP232
│   ├── USR-TCP232-Test.cfg
│   └── USR-TCP232-Test.exe
└── 网络调试助手
├── Readme-说明.htm
└── 网络调试助手V3.7.exe

41 directories, 385 files

标签:

实例下载地址

(STM32)ENC28J60网络模块实验

不能下载?内容有错? 点击这里报错 + 投诉 + 提问

好例子网口号:伸出你的我的手 — 分享

网友评论

发表评论

(您的评论需要经过审核才能显示)

查看所有0条评论>>

小贴士

感谢您为本站写下的评论,您的评论对其它用户来说具有重要的参考价值,所以请认真填写。

  • 类似“顶”、“沙发”之类没有营养的文字,对勤劳贡献的楼主来说是令人沮丧的反馈信息。
  • 相信您也不想看到一排文字/表情墙,所以请不要反馈意义不大的重复字符,也请尽量不要纯表情的回复。
  • 提问之前请再仔细看一遍楼主的说明,或许是您遗漏了。
  • 请勿到处挖坑绊人、招贴广告。既占空间让人厌烦,又没人会搭理,于人于己都无利。

关于好例子网

本站旨在为广大IT学习爱好者提供一个非营利性互相学习交流分享平台。本站所有资源都可以被免费获取学习研究。本站资源来自网友分享,对搜索内容的合法性不具有预见性、识别性、控制性,仅供学习研究,请务必在下载后24小时内给予删除,不得用于其他任何用途,否则后果自负。基于互联网的特殊性,平台无法对用户传输的作品、信息、内容的权属或合法性、安全性、合规性、真实性、科学性、完整权、有效性等进行实质审查;无论平台是否已进行审查,用户均应自行承担因其传输的作品、信息、内容而可能或已经产生的侵权或权属纠纷等法律责任。本站所有资源不代表本站的观点或立场,基于网友分享,根据中国法律《信息网络传播权保护条例》第二十二与二十三条之规定,若资源存在侵权或相关问题请联系本站客服人员,点此联系我们。关于更多版权及免责申明参见 版权及免责申明

;
报警