实例介绍
【实例简介】
Hull, Elizabeth; Jackson, Ken; Dick, Jeremy 国外非常有名的需求工程书籍。
Elizabeth hull Ken jackson Jeremy Dick Requirements Engineering Springer Elizabeth hull, BSc, PhD, CEng, FBCS Jeremy Dick, BSc (Eng), ACGI School of Computing and mathematics DPhil. DIC. ma University of ulst Integrate Systems Engineering Ltd Newtownabbey, Co Antrim Bath UK UK mec hull@@ulst ac uk jeremy. dick @integrate. biz Ken Jackson. BSc MSc MBCS University of Ulster Newtownabbey, Co Antrim UK kenjackson fastmail fm ISBN978-1-84996-404-3 e-ISBN978-1-84996-405-0 DOI10.1007/978-1-84996-405-0 Springer London Dordrecht Heidelberg New York British library cataloguing in Publication Data A catalogue record for this book is available from the British Library Library of Congress Control Number: 2010937427 O Springer-Verlag London Limited 2011 Apart from any fair dealing for the purposes of research or private study, or criticism or review, as ermitted under the Copyright, Designs and Patents Act 1988, this publication may only be repro-duced stored or transmitted, in any form or by any means, with the prior permission in writing of the publishers or in the case of reprographic reproduction in accordance with the terms of licenses issued by the Copyright Licensing Agency. Enquiries concerning reproduction outside those terms should be sent to the publishers The use of registered names, trademarks, etc, in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant laws and regulations and there-fore free for general use The publisher makes no representation, express orimplied, with regard to the accuracy of the informa-tion contained in this book and cannot accept any legal responsibility or liability for any errors or omissions that may be made Printed on acid-free paper SpringerispartofSpringerScience+businessMedia(www.springer.com) We would like to dedicate this book as follows To my late parents John and Edna hull Elizabeth Hull To my wife Chris, To my children and their spouses Kate, Stef, Andy, Amy and Pete and to my grand children lizzie, Alice, Emily and Annabel Ken jackson To my wife Yvonne and to my children Sebastian, Timothy, Angus, Robin and Felicity Jeremy dick Preface to the third edition In our desire to keep the material in this book current, the main driver in creating a new edition has been to adapt to the latest release of dOoRs. since the publication of Edition 2. Telelogic-the developer of doors- has been acquired by ibm. and the tool has become part of the IBM/Rational stable. While the basic functions of the tool remain unchanged, the look-and-feel has advanced considerably. Therefore Chapter 9 has been updated for dOORS version 9.2 At the same time, we felt the need to provide a more explicit definition of Requirements Engineering. In searching the literature, we could not find a satisfac tory definition and we have addressed this in chapter l Apart from this, there is an expanded description of Product Family Management in Chapter 8, and a variety of small corrections throughout We hope our readers -students and practitioners continue to find this a valu able text in advancing their understanding of the topic april 2010 Elizabeth hull Ken jackson Jeremy dick Preface to the second edition This second edition follows quickly on the first edition and is an indication of how fast the subject is changing and developing. In the past 2 years there have been significant advances and these are reflected in this new edition Essentially, this is an update that places more emphasis on modelling by describ ing a greater range of approaches to system modelling. It introduces the UML2, which is the recent standard approved by the Omg. There is also an enhanced discussion on the relationship between requirements management and modelling, which relates well to the concept of rich traceability The chapter on the requirements management tool doors has been revised to use Version 7 of the tool and this is complemented with examples taken from the DOORS/Analyst tool which demonstrates how the concepts of modelling can be captured and created within DOOrs The text is still aimed at students and practitioners of systems engineering who are keen to gain knowledge of using requirements engineering for system development As before, a website supporting additional material is available at http://www.requirementsengineering.info June 2004 Elizabeth hull Ken jackson Dick 【实例截图】
【核心代码】
Hull, Elizabeth; Jackson, Ken; Dick, Jeremy 国外非常有名的需求工程书籍。
Elizabeth hull Ken jackson Jeremy Dick Requirements Engineering Springer Elizabeth hull, BSc, PhD, CEng, FBCS Jeremy Dick, BSc (Eng), ACGI School of Computing and mathematics DPhil. DIC. ma University of ulst Integrate Systems Engineering Ltd Newtownabbey, Co Antrim Bath UK UK mec hull@@ulst ac uk jeremy. dick @integrate. biz Ken Jackson. BSc MSc MBCS University of Ulster Newtownabbey, Co Antrim UK kenjackson fastmail fm ISBN978-1-84996-404-3 e-ISBN978-1-84996-405-0 DOI10.1007/978-1-84996-405-0 Springer London Dordrecht Heidelberg New York British library cataloguing in Publication Data A catalogue record for this book is available from the British Library Library of Congress Control Number: 2010937427 O Springer-Verlag London Limited 2011 Apart from any fair dealing for the purposes of research or private study, or criticism or review, as ermitted under the Copyright, Designs and Patents Act 1988, this publication may only be repro-duced stored or transmitted, in any form or by any means, with the prior permission in writing of the publishers or in the case of reprographic reproduction in accordance with the terms of licenses issued by the Copyright Licensing Agency. Enquiries concerning reproduction outside those terms should be sent to the publishers The use of registered names, trademarks, etc, in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant laws and regulations and there-fore free for general use The publisher makes no representation, express orimplied, with regard to the accuracy of the informa-tion contained in this book and cannot accept any legal responsibility or liability for any errors or omissions that may be made Printed on acid-free paper SpringerispartofSpringerScience+businessMedia(www.springer.com) We would like to dedicate this book as follows To my late parents John and Edna hull Elizabeth Hull To my wife Chris, To my children and their spouses Kate, Stef, Andy, Amy and Pete and to my grand children lizzie, Alice, Emily and Annabel Ken jackson To my wife Yvonne and to my children Sebastian, Timothy, Angus, Robin and Felicity Jeremy dick Preface to the third edition In our desire to keep the material in this book current, the main driver in creating a new edition has been to adapt to the latest release of dOoRs. since the publication of Edition 2. Telelogic-the developer of doors- has been acquired by ibm. and the tool has become part of the IBM/Rational stable. While the basic functions of the tool remain unchanged, the look-and-feel has advanced considerably. Therefore Chapter 9 has been updated for dOORS version 9.2 At the same time, we felt the need to provide a more explicit definition of Requirements Engineering. In searching the literature, we could not find a satisfac tory definition and we have addressed this in chapter l Apart from this, there is an expanded description of Product Family Management in Chapter 8, and a variety of small corrections throughout We hope our readers -students and practitioners continue to find this a valu able text in advancing their understanding of the topic april 2010 Elizabeth hull Ken jackson Jeremy dick Preface to the second edition This second edition follows quickly on the first edition and is an indication of how fast the subject is changing and developing. In the past 2 years there have been significant advances and these are reflected in this new edition Essentially, this is an update that places more emphasis on modelling by describ ing a greater range of approaches to system modelling. It introduces the UML2, which is the recent standard approved by the Omg. There is also an enhanced discussion on the relationship between requirements management and modelling, which relates well to the concept of rich traceability The chapter on the requirements management tool doors has been revised to use Version 7 of the tool and this is complemented with examples taken from the DOORS/Analyst tool which demonstrates how the concepts of modelling can be captured and created within DOOrs The text is still aimed at students and practitioners of systems engineering who are keen to gain knowledge of using requirements engineering for system development As before, a website supporting additional material is available at http://www.requirementsengineering.info June 2004 Elizabeth hull Ken jackson Dick 【实例截图】
【核心代码】
标签：
好例子网口号：伸出你的我的手 — 分享！
小贴士
感谢您为本站写下的评论，您的评论对其它用户来说具有重要的参考价值，所以请认真填写。
- 类似“顶”、“沙发”之类没有营养的文字，对勤劳贡献的楼主来说是令人沮丧的反馈信息。
- 相信您也不想看到一排文字/表情墙，所以请不要反馈意义不大的重复字符，也请尽量不要纯表情的回复。
- 提问之前请再仔细看一遍楼主的说明，或许是您遗漏了。
- 请勿到处挖坑绊人、招贴广告。既占空间让人厌烦，又没人会搭理，于人于己都无利。
关于好例子网
本站旨在为广大IT学习爱好者提供一个非营利性互相学习交流分享平台。本站所有资源都可以被免费获取学习研究。本站资源来自网友分享，对搜索内容的合法性不具有预见性、识别性、控制性，仅供学习研究，请务必在下载后24小时内给予删除，不得用于其他任何用途，否则后果自负。基于互联网的特殊性，平台无法对用户传输的作品、信息、内容的权属或合法性、安全性、合规性、真实性、科学性、完整权、有效性等进行实质审查；无论平台是否已进行审查，用户均应自行承担因其传输的作品、信息、内容而可能或已经产生的侵权或权属纠纷等法律责任。本站所有资源不代表本站的观点或立场，基于网友分享，根据中国法律《信息网络传播权保护条例》第二十二与二十三条之规定，若资源存在侵权或相关问题请联系本站客服人员，点此联系我们。关于更多版权及免责申明参见 版权及免责申明
网友评论
我要评论