在好例子网,分享、交流、成长!
您当前所在位置:首页C/C++ 开发实例嵌入式开发 → 小型飞机远程数据采集显示系统

小型飞机远程数据采集显示系统

嵌入式开发

下载此实例
  • 开发语言:C/C++
  • 实例大小:9.32M
  • 下载次数:11
  • 浏览次数:73
  • 发布时间:2023-11-17
  • 实例类别:嵌入式开发
  • 发 布 人:张海龙哇偶
  • 文件格式:.zip
  • 所需积分:5

实例介绍

【实例简介】基于STM32最小系统,通过MPU6050采集飞机俯仰角、滚转角、偏航角、当飞机低于5米时通过超声波模块测高度;当高度超过5米时候,通过MS5611采集气压值,进而获取当前高度,最后通过WIFI模块传给PC端实现实时显示。

【实例截图】

from clipboard

【核心代码】

.
├── STM32-ESP8266(AP模式发送数据)
│   ├── Application
│   │   └── Util
│   │       ├── system.h
│   │       ├── util.c
│   │       └── util.h
│   ├── CORE
│   │   ├── core_cm3.c
│   │   ├── core_cm3.h
│   │   ├── startup_stm32f10x_hd.s
│   │   └── startup_stm32f10x_md.s
│   ├── Doc
│   │   ├── wifi_function.txt
│   │   ├── 备注.txt
│   │   ├── 引脚连接.txt
│   │   └── 网页控制ESP8266.txt
│   ├── HARDWARE
│   │   ├── IIC
│   │   │   ├── myiic.c
│   │   │   └── myiic.h
│   │   ├── SysTick
│   │   │   ├── bsp_SysTick.c
│   │   │   ├── bsp_SysTick.h
│   │   │   ├── systick.c
│   │   │   └── systick.h
│   │   ├── cjson
│   │   │   ├── cJSON.c
│   │   │   └── cJSON.h
│   │   ├── gpio
│   │   │   ├── bsp_gpio.c
│   │   │   └── bsp_gpio.h
│   │   ├── mpu6050
│   │   │   ├── mpu6050.c
│   │   │   └── mpu6050.h
│   │   ├── printf
│   │   │   ├── printf.c
│   │   │   └── printf.h
│   │   ├── usart
│   │   │   ├── bsp_usart1.c
│   │   │   ├── bsp_usart1.h
│   │   │   ├── bsp_usart2.c
│   │   │   └── bsp_usart2.h
│   │   └── wifi
│   │       ├── wifi_config.c
│   │       ├── wifi_config.h
│   │       ├── wifi_function.c
│   │       └── wifi_function.h
│   ├── MS5611
│   │   ├── MS5611
│   │   │   ├── ms5611.c
│   │   │   └── ms5611.h
│   │   ├── SoftI2c
│   │   │   ├── soft_iic.c
│   │   │   ├── soft_iic.h
│   │   │   └── system.h
│   │   ├── Usart1
│   │   │   ├── system.h
│   │   │   ├── usart.h
│   │   │   ├── usart1_dma.c
│   │   │   └── usart1_dma.h
│   │   └── Wdog
│   │       ├── system.h
│   │       ├── wdog.c
│   │       └── wdog.h
│   ├── OBJ
│   │   ├── USART.build_log.htm
│   │   ├── USART.htm
│   │   ├── USART.lnp
│   │   ├── USART.sct
│   │   ├── USART_Target 1.dep
│   │   ├── bsp_gpio.crf
│   │   ├── bsp_gpio.d
│   │   ├── bsp_gpio.o
│   │   ├── bsp_systick.crf
│   │   ├── bsp_systick.d
│   │   ├── bsp_systick.o
│   │   ├── bsp_usart1.crf
│   │   ├── bsp_usart1.d
│   │   ├── bsp_usart1.o
│   │   ├── bsp_usart2.crf
│   │   ├── bsp_usart2.d
│   │   ├── bsp_usart2.o
│   │   ├── core_cm3.crf
│   │   ├── core_cm3.d
│   │   ├── core_cm3.o
│   │   ├── delay.crf
│   │   ├── delay.d
│   │   ├── delay.o
│   │   ├── i2c.crf
│   │   ├── i2c.d
│   │   ├── i2c.o
│   │   ├── iic_analog.crf
│   │   ├── iic_analog.d
│   │   ├── iic_analog.o
│   │   ├── ili9320.crf
│   │   ├── ili9320.d
│   │   ├── ili9320_api.crf
│   │   ├── ili9320_api.d
│   │   ├── ili9320_api.o
│   │   ├── ili9320_touch.crf
│   │   ├── ili9320_touch.d
│   │   ├── imu.crf
│   │   ├── imu.d
│   │   ├── imu.o
│   │   ├── key.crf
│   │   ├── key.d
│   │   ├── key.o
│   │   ├── lcd.crf
│   │   ├── lcd.d
│   │   ├── lcd.o
│   │   ├── led.crf
│   │   ├── led.d
│   │   ├── led.o
│   │   ├── main.crf
│   │   ├── main.d
│   │   ├── main.o
│   │   ├── misc.crf
│   │   ├── misc.d
│   │   ├── misc.o
│   │   ├── mpu6050.crf
│   │   ├── mpu6050.d
│   │   ├── mpu6050.o
│   │   ├── ms5611.crf
│   │   ├── ms5611.d
│   │   ├── ms5611.o
│   │   ├── myiic.crf
│   │   ├── myiic.d
│   │   ├── myiic.o
│   │   ├── myiic_1.crf
│   │   ├── myiic_1.d
│   │   ├── myiic_1.o
│   │   ├── printf.crf
│   │   ├── printf.d
│   │   ├── printf.o
│   │   ├── soft_iic.crf
│   │   ├── soft_iic.d
│   │   ├── soft_iic.o
│   │   ├── startup_stm32f10x_hd.d
│   │   ├── startup_stm32f10x_hd.o
│   │   ├── stm32f10x_adc.crf
│   │   ├── stm32f10x_adc.d
│   │   ├── stm32f10x_bkp.crf
│   │   ├── stm32f10x_bkp.d
│   │   ├── stm32f10x_bkp.o
│   │   ├── stm32f10x_can.crf
│   │   ├── stm32f10x_can.d
│   │   ├── stm32f10x_cec.crf
│   │   ├── stm32f10x_cec.d
│   │   ├── stm32f10x_cec.o
│   │   ├── stm32f10x_crc.crf
│   │   ├── stm32f10x_crc.d
│   │   ├── stm32f10x_crc.o
│   │   ├── stm32f10x_dbgmcu.crf
│   │   ├── stm32f10x_dbgmcu.d
│   │   ├── stm32f10x_dbgmcu.o
│   │   ├── stm32f10x_dma.crf
│   │   ├── stm32f10x_dma.d
│   │   ├── stm32f10x_exti.crf
│   │   ├── stm32f10x_exti.d
│   │   ├── stm32f10x_exti.o
│   │   ├── stm32f10x_flash.crf
│   │   ├── stm32f10x_flash.d
│   │   ├── stm32f10x_flash.o
│   │   ├── stm32f10x_fsmc.crf
│   │   ├── stm32f10x_fsmc.d
│   │   ├── stm32f10x_fsmc.o
│   │   ├── stm32f10x_gpio.crf
│   │   ├── stm32f10x_gpio.d
│   │   ├── stm32f10x_gpio.o
│   │   ├── stm32f10x_i2c.crf
│   │   ├── stm32f10x_i2c.d
│   │   ├── stm32f10x_it.crf
│   │   ├── stm32f10x_it.d
│   │   ├── stm32f10x_it.o
│   │   ├── stm32f10x_iwdg.crf
│   │   ├── stm32f10x_iwdg.d
│   │   ├── stm32f10x_pwr.crf
│   │   ├── stm32f10x_pwr.d
│   │   ├── stm32f10x_pwr.o
│   │   ├── stm32f10x_rcc.crf
│   │   ├── stm32f10x_rcc.d
│   │   ├── stm32f10x_rcc.o
│   │   ├── stm32f10x_rtc.crf
│   │   ├── stm32f10x_rtc.d
│   │   ├── stm32f10x_rtc.o
│   │   ├── stm32f10x_sdio.crf
│   │   ├── stm32f10x_sdio.d
│   │   ├── stm32f10x_spi.crf
│   │   ├── stm32f10x_spi.d
│   │   ├── stm32f10x_tim.crf
│   │   ├── stm32f10x_tim.d
│   │   ├── stm32f10x_tim.o
│   │   ├── stm32f10x_usart.crf
│   │   ├── stm32f10x_usart.d
│   │   ├── stm32f10x_usart.o
│   │   ├── stm32f10x_wwdg.crf
│   │   ├── stm32f10x_wwdg.d
│   │   ├── sys.crf
│   │   ├── sys.d
│   │   ├── sys.o
│   │   ├── system_stm32f10x.crf
│   │   ├── system_stm32f10x.d
│   │   ├── system_stm32f10x.o
│   │   ├── systick.crf
│   │   ├── systick.d
│   │   ├── systick.o
│   │   ├── systickq.crf
│   │   ├── systickq.d
│   │   ├── systickq.o
│   │   ├── tim2.crf
│   │   ├── tim2.d
│   │   ├── tim2.o
│   │   ├── ultrasonicwave.crf
│   │   ├── ultrasonicwave.d
│   │   ├── ultrasonicwave.o
│   │   ├── usart.crf
│   │   ├── usart.d
│   │   ├── usart.o
│   │   ├── usart1.crf
│   │   ├── usart1.d
│   │   ├── usart1.o
│   │   ├── usart1_dma.crf
│   │   ├── usart1_dma.d
│   │   ├── usart1_dma.o
│   │   ├── util.crf
│   │   ├── util.d
│   │   ├── util.o
│   │   ├── wdog.crf
│   │   ├── wdog.d
│   │   ├── wdog.o
│   │   ├── wifi_config.crf
│   │   ├── wifi_config.d
│   │   ├── wifi_config.o
│   │   ├── wifi_function.crf
│   │   ├── wifi_function.d
│   │   └── wifi_function.o
│   ├── STM32F10x_FWLib
│   │   ├── inc
│   │   │   ├── misc.h
│   │   │   ├── stm32f10x_adc.h
│   │   │   ├── stm32f10x_bkp.h
│   │   │   ├── stm32f10x_can.h
│   │   │   ├── stm32f10x_cec.h
│   │   │   ├── stm32f10x_crc.h
│   │   │   ├── stm32f10x_dac.h
│   │   │   ├── stm32f10x_dbgmcu.h
│   │   │   ├── stm32f10x_dma.h
│   │   │   ├── stm32f10x_exti.h
│   │   │   ├── stm32f10x_flash.h
│   │   │   ├── stm32f10x_fsmc.h
│   │   │   ├── stm32f10x_gpio.h
│   │   │   ├── stm32f10x_i2c.h
│   │   │   ├── stm32f10x_iwdg.h
│   │   │   ├── stm32f10x_pwr.h
│   │   │   ├── stm32f10x_rcc.h
│   │   │   ├── stm32f10x_rtc.h
│   │   │   ├── stm32f10x_sdio.h
│   │   │   ├── stm32f10x_spi.h
│   │   │   ├── stm32f10x_tim.h
│   │   │   ├── stm32f10x_usart.h
│   │   │   └── stm32f10x_wwdg.h
│   │   └── src
│   │       ├── misc.c
│   │       ├── stm32f10x_adc.c
│   │       ├── stm32f10x_bkp.c
│   │       ├── stm32f10x_can.c
│   │       ├── stm32f10x_cec.c
│   │       ├── stm32f10x_crc.c
│   │       ├── stm32f10x_dac.c
│   │       ├── stm32f10x_dbgmcu.c
│   │       ├── stm32f10x_dma.c
│   │       ├── stm32f10x_exti.c
│   │       ├── stm32f10x_flash.c
│   │       ├── stm32f10x_fsmc.c
│   │       ├── stm32f10x_gpio.c
│   │       ├── stm32f10x_i2c.c
│   │       ├── stm32f10x_iwdg.c
│   │       ├── stm32f10x_pwr.c
│   │       ├── stm32f10x_rcc.c
│   │       ├── stm32f10x_rtc.c
│   │       ├── stm32f10x_sdio.c
│   │       ├── stm32f10x_spi.c
│   │       ├── stm32f10x_tim.c
│   │       ├── stm32f10x_usart.c
│   │       └── stm32f10x_wwdg.c
│   ├── USER
│   │   ├── DebugConfig
│   │   │   └── Target_1_STM32F103ZE_1.0.0.dbgconf
│   │   ├── Imu.h
│   │   ├── JLinkSettings.ini
│   │   ├── TIM2.c
│   │   ├── TIM2.h
│   │   ├── USART.map
│   │   ├── USART.uvgui.clark
│   │   ├── USART.uvguix.35107
│   │   ├── USART.uvguix.Administrator
│   │   ├── USART.uvguix.Tonlin_Chen
│   │   ├── USART.uvguix.lenovo
│   │   ├── USART.uvopt
│   │   ├── USART.uvoptx
│   │   ├── USART.uvproj.saved_uv4
│   │   ├── USART.uvprojx
│   │   ├── UltrasonicWave.c
│   │   ├── UltrasonicWave.h
│   │   ├── delay.h
│   │   ├── i2c.h
│   │   ├── main.c
│   │   ├── main.h
│   │   ├── mpu6050.h
│   │   ├── ms5611.h
│   │   ├── public.h
│   │   ├── startup_stm32f10x_hd.lst
│   │   ├── stm32f10x.h
│   │   ├── stm32f10x_conf.h
│   │   ├── stm32f10x_it.c
│   │   ├── stm32f10x_it.h
│   │   ├── sys.h
│   │   ├── system_stm32f10x.c
│   │   ├── system_stm32f10x.h
│   │   ├── systickq.h
│   │   ├── usart.h
│   │   ├── usart1.c
│   │   └── usart1.h
│   ├── WIFI-安卓和PC测试软件
│   │   ├── USR-TCP-Test.apk
│   │   ├── USR-TCP232-Test.cfg
│   │   ├── USR-TCP232-Test.exe
│   │   └── USR-TCP232-Test.zip
│   ├── apps
│   │   ├── Imu.c
│   │   ├── Imu.h
│   │   ├── mpu6050.c
│   │   └── mpu6050.h
│   ├── keilkilll.bat
│   └── system
│       ├── IIC
│       │   ├── i2c.c
│       │   └── i2c.h
│       ├── delay
│       │   ├── delay.c
│       │   └── delay.h
│       ├── sys
│       │   ├── sys.c
│       │   └── sys.h
│       ├── sysz
│       │   ├── systickq.c
│       │   └── systickq.h
│       └── usart
│           ├── usart.c
│           └── usart.h
└── 小型飞机远程数据采集显示系统_STM32-ESP8266(AP模式发送数据).zip

33 directories, 318 files


实例下载地址

小型飞机远程数据采集显示系统

不能下载?内容有错? 点击这里报错 + 投诉 + 提问

好例子网口号:伸出你的我的手 — 分享

网友评论

发表评论

(您的评论需要经过审核才能显示)

查看所有0条评论>>

小贴士

感谢您为本站写下的评论,您的评论对其它用户来说具有重要的参考价值,所以请认真填写。

  • 类似“顶”、“沙发”之类没有营养的文字,对勤劳贡献的楼主来说是令人沮丧的反馈信息。
  • 相信您也不想看到一排文字/表情墙,所以请不要反馈意义不大的重复字符,也请尽量不要纯表情的回复。
  • 提问之前请再仔细看一遍楼主的说明,或许是您遗漏了。
  • 请勿到处挖坑绊人、招贴广告。既占空间让人厌烦,又没人会搭理,于人于己都无利。

关于好例子网

本站旨在为广大IT学习爱好者提供一个非营利性互相学习交流分享平台。本站所有资源都可以被免费获取学习研究。本站资源来自网友分享,对搜索内容的合法性不具有预见性、识别性、控制性,仅供学习研究,请务必在下载后24小时内给予删除,不得用于其他任何用途,否则后果自负。基于互联网的特殊性,平台无法对用户传输的作品、信息、内容的权属或合法性、安全性、合规性、真实性、科学性、完整权、有效性等进行实质审查;无论平台是否已进行审查,用户均应自行承担因其传输的作品、信息、内容而可能或已经产生的侵权或权属纠纷等法律责任。本站所有资源不代表本站的观点或立场,基于网友分享,根据中国法律《信息网络传播权保护条例》第二十二与二十三条之规定,若资源存在侵权或相关问题请联系本站客服人员,点此联系我们。关于更多版权及免责申明参见 版权及免责申明

;
报警