实例介绍
【实例简介】
霍尼韦尔3310说明书。通过该说明书，可以很顺利的完成硬件的安装与驱动。
Product Agency Compliance- vuquest 3310 USA FCC Part 15 Subpart B Class B This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions 1. This device may not cause harmful interference 2. This device must accept any interference received, including interference that may cause undesired operation This equipment has been tested and found to comply with the limits Class b digital device pursuant to part 15 of the fcc rules. These are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radi ate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica tions. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equip ment off and on, the user is encouraged to try to correct the interference one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio or television technician for If necessary, the user should consult the dealer or an experienced radio/ television technician for additional suggestions. The user may find the fol- lowing booklet helpful: Something about Interference. This is available at FCC local regional offices. Honeywell is not responsible for any radio or television interference caused by unauthorized modifications of this equip ment or the substitution or attachment of connecting cables and equipment other than those specified by Honeywell. The correction is the responsibil ity of the user Use only shielded data cables with this system. This unit has been tested with cables less than 3 meters. Cables greater than 3 meters may not meet class b performance Caution any cha odifications made to this pment not expressly approved by Honeywell may void the FCc authorization to oper ate this equipment UL Statement UL listed UL60950-1 Canada Industry Canada ICES-003 This class b digital apparatus complies with Canadian ICEs-003. Opera- tion is subject to the following conditions 1. This device may not cause harmful interference 2. This device must accept any interference received, including interference that may cause undesired operation Conformite a la reglementation canadienne Cet appareil numerique de la classe b est conforme a la norme NMB-003 du Canada. Son fonctionnement est assujetti aux conditions suivantes 1. Cet appareil ne doit pas causer de brouillage prejudiciable 2. Cet appareil doit pouvoir accepter tout brouillage recu, y compris le brouillage pouvant causer un fonctionnement indesirable CUL Statement CUL listed CSA C22.2 No, 60950-1-07 Europe 〔∈sm1N532A3024102 IC Directive to 2006/95/EC Low voltage Direc- tive, when shipped with ded power supply For further information please contact Honeywell Imaging mobility Europe BV Nijverheidsweg 9-13 5627 BT Eindhoven The netherlands Honeywell International Inc. shall not be liable for use of our product with equipment (i.e., power supplies, personal computers, etc. )that is not CE marked and does not comply with the Low Voltage Directive Waste Electrical and electronic equipment Information Honeywell complies with Directive 2002/96/EC OF THE EUROPEAN PAR- LIAMENT AND OF THE COUNCIL of 27 January 2003 on waste electrical d electronic equipment ( WEEE) This product has required the extraction and use of natural resources for its production It may contain hazardous substances that could impact health and the environment, if not properly disposed In order to avoid the dissemination of those substances in our environment and to diminish the pressure on the natural resources, we encourage you to use the appropriate take-back systems for product disposal. Those sys tems will reuse or recycle most of the materials of the product you are dis posing in a sound way The crossed out wheeled bin symbol informs you that the product should not be disposed of along with municipal waste and invites you to use the appropriate separate take-back systems for product disposal If you need more information on the collection, reuse, and recycling sys tems, please contact your local or regional waste administration You may also contact your supplier for more information on the environ mental performances of this product Germany If your product is marked with the GS symbol, then the product has been issued a gs certificate showing compliance to EN 60950-1. Second Edition This device is not intended for use in direct field of view at visual display workplaces. To avoid distracting reflections at visual dis play workplaces, this device should not be placed in direct field of VIew South Korea This prod ets Korean agency approval Taiwan If the following label is attached to your product, the product meets Taiwan agency approval BSMI Standard CNS 13438. CNS14336-1 依據標準:GNS13438,CNS14336-1 International ED Safety Statement LEDs have been tested and classified as“EⅩ EMPT RISK GROUP” to the standard: IEC 62471: 2006 CB Scheme Certified to Cb Scheme IEC 60950-1. Second edition Patents Forpatentinformationpleaserefertowww.honeywellaidc.com/patents Solids and water protection The Vuquest 3310 has a rating of IP53, immunity of foreign particles and drip ping water. Warning △ To reduce the possibility of heat-related injuries, avoid touching sec- tions of the scanner that feel warm Caution △ To maintain compliance with standards when not powering the imager with the optional power supply, the power source should be listed and meet applicable requirements for a limited power source or a Class 2 power supply with rating: 5 -5.2 Vdc, 1.0 A minimum Required Safety Labels Scanner Illumination output Part number Serial Number and revision location Compleat Label location Table of contents Chapter 1-Getting Starter About this manu Unpacking Your Device aa:::aaaa:aaaaaa:aa.:aaaa:aa Connecting the device Connecting with USB Connecting with Keyboard Wedge 1-2 Connecting with RS232 Serial Port 13 Reading Techniques 1-4 Menu Bar Code Security Settings……….1.4 Setting Custom Defaults… Resetting the Custom Defaults Resetting the Factory Defaul Chapter 2- Programming the Interface Introduction Programming the Interface- Plug and Play ..............2-1 Keyboard Wedge.… 2-1 Laptop Direct Connect..................2-1 RS232 Serial port 2-2 USB IBM Sure Pos I.... 2-2 USB PC or Macintosh Keyboard 2-3 USB HID..…2-3 USB Serial 2-3 Verifone e Ruby Terminal Default Settings....2-4 Gilbarco terminal default Settings 2-5 Honeywell Bioptic Aux Port Configuration....2-5 Datalogic TM Magellan Bioptic Aux Port Configuration 2-6 NCR Bioptic Aux Port Configuration 2-6 Wincor Nixdorf terminal Default Settings.....2-7 Wincor nixdorf beetleTm termina Default Settings 2-7 Keyboard Country Layout 2-8 Keyboard Style 2-15 Keyboard Conversion Control character Output...…… 2-16 2-17 Keyboard Modifiers...............2-17 RS232 Baud Rate 2-20 RS232 Word Length: Data Bits, Stop Bits and parity 2-21 RS232 Receiver Time-Out 2-22 RS232 Handshaking 2-22 RS232 Timeout 2-23 XON/XOFF .2-23 ACK/NAK 2-23 Scanner to Bioptic Communication........2-24 Scanner-Bioptic Packet Mode 2-24 Scanner-Bioptic ACK/NAK Mode..........2-25 Scanner-Bioptic ACK/NAK Timeout 2-25 Chapter 3- Input/Output Settings Power Up Beeper………… Beep on bel Character 3-1 Trigger Click 3-1 Good Read and Error Indicators 3-2 Beeper- Good Read 3-2 Beeper Volume -Good Read 3-2 Beeper Pitch -Good Read............3-3 Beeper Pitch-Error 3-3 Beeper Duration -Good Read LED-Good Read 3-4 Number of beeps- Good Read 3-4 Number of Beeps-Eror.……………34 Good Read Delay 3-5 User-Specified Good Read Delay………3-5 Manual T rigger Modes 3-5 Serial Trigger Mode ....................3-6 Read Time-Out 3-6 Presentation mode 3-6 Presentation lEd Behavior after Decode 重m 3-7 【实例截图】
【核心代码】
霍尼韦尔3310说明书。通过该说明书，可以很顺利的完成硬件的安装与驱动。
Product Agency Compliance- vuquest 3310 USA FCC Part 15 Subpart B Class B This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions 1. This device may not cause harmful interference 2. This device must accept any interference received, including interference that may cause undesired operation This equipment has been tested and found to comply with the limits Class b digital device pursuant to part 15 of the fcc rules. These are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radi ate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica tions. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equip ment off and on, the user is encouraged to try to correct the interference one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio or television technician for If necessary, the user should consult the dealer or an experienced radio/ television technician for additional suggestions. The user may find the fol- lowing booklet helpful: Something about Interference. This is available at FCC local regional offices. Honeywell is not responsible for any radio or television interference caused by unauthorized modifications of this equip ment or the substitution or attachment of connecting cables and equipment other than those specified by Honeywell. The correction is the responsibil ity of the user Use only shielded data cables with this system. This unit has been tested with cables less than 3 meters. Cables greater than 3 meters may not meet class b performance Caution any cha odifications made to this pment not expressly approved by Honeywell may void the FCc authorization to oper ate this equipment UL Statement UL listed UL60950-1 Canada Industry Canada ICES-003 This class b digital apparatus complies with Canadian ICEs-003. Opera- tion is subject to the following conditions 1. This device may not cause harmful interference 2. This device must accept any interference received, including interference that may cause undesired operation Conformite a la reglementation canadienne Cet appareil numerique de la classe b est conforme a la norme NMB-003 du Canada. Son fonctionnement est assujetti aux conditions suivantes 1. Cet appareil ne doit pas causer de brouillage prejudiciable 2. Cet appareil doit pouvoir accepter tout brouillage recu, y compris le brouillage pouvant causer un fonctionnement indesirable CUL Statement CUL listed CSA C22.2 No, 60950-1-07 Europe 〔∈sm1N532A3024102 IC Directive to 2006/95/EC Low voltage Direc- tive, when shipped with ded power supply For further information please contact Honeywell Imaging mobility Europe BV Nijverheidsweg 9-13 5627 BT Eindhoven The netherlands Honeywell International Inc. shall not be liable for use of our product with equipment (i.e., power supplies, personal computers, etc. )that is not CE marked and does not comply with the Low Voltage Directive Waste Electrical and electronic equipment Information Honeywell complies with Directive 2002/96/EC OF THE EUROPEAN PAR- LIAMENT AND OF THE COUNCIL of 27 January 2003 on waste electrical d electronic equipment ( WEEE) This product has required the extraction and use of natural resources for its production It may contain hazardous substances that could impact health and the environment, if not properly disposed In order to avoid the dissemination of those substances in our environment and to diminish the pressure on the natural resources, we encourage you to use the appropriate take-back systems for product disposal. Those sys tems will reuse or recycle most of the materials of the product you are dis posing in a sound way The crossed out wheeled bin symbol informs you that the product should not be disposed of along with municipal waste and invites you to use the appropriate separate take-back systems for product disposal If you need more information on the collection, reuse, and recycling sys tems, please contact your local or regional waste administration You may also contact your supplier for more information on the environ mental performances of this product Germany If your product is marked with the GS symbol, then the product has been issued a gs certificate showing compliance to EN 60950-1. Second Edition This device is not intended for use in direct field of view at visual display workplaces. To avoid distracting reflections at visual dis play workplaces, this device should not be placed in direct field of VIew South Korea This prod ets Korean agency approval Taiwan If the following label is attached to your product, the product meets Taiwan agency approval BSMI Standard CNS 13438. CNS14336-1 依據標準:GNS13438,CNS14336-1 International ED Safety Statement LEDs have been tested and classified as“EⅩ EMPT RISK GROUP” to the standard: IEC 62471: 2006 CB Scheme Certified to Cb Scheme IEC 60950-1. Second edition Patents Forpatentinformationpleaserefertowww.honeywellaidc.com/patents Solids and water protection The Vuquest 3310 has a rating of IP53, immunity of foreign particles and drip ping water. Warning △ To reduce the possibility of heat-related injuries, avoid touching sec- tions of the scanner that feel warm Caution △ To maintain compliance with standards when not powering the imager with the optional power supply, the power source should be listed and meet applicable requirements for a limited power source or a Class 2 power supply with rating: 5 -5.2 Vdc, 1.0 A minimum Required Safety Labels Scanner Illumination output Part number Serial Number and revision location Compleat Label location Table of contents Chapter 1-Getting Starter About this manu Unpacking Your Device aa:::aaaa:aaaaaa:aa.:aaaa:aa Connecting the device Connecting with USB Connecting with Keyboard Wedge 1-2 Connecting with RS232 Serial Port 13 Reading Techniques 1-4 Menu Bar Code Security Settings……….1.4 Setting Custom Defaults… Resetting the Custom Defaults Resetting the Factory Defaul Chapter 2- Programming the Interface Introduction Programming the Interface- Plug and Play ..............2-1 Keyboard Wedge.… 2-1 Laptop Direct Connect..................2-1 RS232 Serial port 2-2 USB IBM Sure Pos I.... 2-2 USB PC or Macintosh Keyboard 2-3 USB HID..…2-3 USB Serial 2-3 Verifone e Ruby Terminal Default Settings....2-4 Gilbarco terminal default Settings 2-5 Honeywell Bioptic Aux Port Configuration....2-5 Datalogic TM Magellan Bioptic Aux Port Configuration 2-6 NCR Bioptic Aux Port Configuration 2-6 Wincor Nixdorf terminal Default Settings.....2-7 Wincor nixdorf beetleTm termina Default Settings 2-7 Keyboard Country Layout 2-8 Keyboard Style 2-15 Keyboard Conversion Control character Output...…… 2-16 2-17 Keyboard Modifiers...............2-17 RS232 Baud Rate 2-20 RS232 Word Length: Data Bits, Stop Bits and parity 2-21 RS232 Receiver Time-Out 2-22 RS232 Handshaking 2-22 RS232 Timeout 2-23 XON/XOFF .2-23 ACK/NAK 2-23 Scanner to Bioptic Communication........2-24 Scanner-Bioptic Packet Mode 2-24 Scanner-Bioptic ACK/NAK Mode..........2-25 Scanner-Bioptic ACK/NAK Timeout 2-25 Chapter 3- Input/Output Settings Power Up Beeper………… Beep on bel Character 3-1 Trigger Click 3-1 Good Read and Error Indicators 3-2 Beeper- Good Read 3-2 Beeper Volume -Good Read 3-2 Beeper Pitch -Good Read............3-3 Beeper Pitch-Error 3-3 Beeper Duration -Good Read LED-Good Read 3-4 Number of beeps- Good Read 3-4 Number of Beeps-Eror.……………34 Good Read Delay 3-5 User-Specified Good Read Delay………3-5 Manual T rigger Modes 3-5 Serial Trigger Mode ....................3-6 Read Time-Out 3-6 Presentation mode 3-6 Presentation lEd Behavior after Decode 重m 3-7 【实例截图】
【核心代码】
标签：
好例子网口号：伸出你的我的手 — 分享！
小贴士
感谢您为本站写下的评论，您的评论对其它用户来说具有重要的参考价值，所以请认真填写。
- 类似“顶”、“沙发”之类没有营养的文字，对勤劳贡献的楼主来说是令人沮丧的反馈信息。
- 相信您也不想看到一排文字/表情墙，所以请不要反馈意义不大的重复字符，也请尽量不要纯表情的回复。
- 提问之前请再仔细看一遍楼主的说明，或许是您遗漏了。
- 请勿到处挖坑绊人、招贴广告。既占空间让人厌烦，又没人会搭理，于人于己都无利。
关于好例子网
本站旨在为广大IT学习爱好者提供一个非营利性互相学习交流分享平台。本站所有资源都可以被免费获取学习研究。本站资源来自网友分享，对搜索内容的合法性不具有预见性、识别性、控制性，仅供学习研究，请务必在下载后24小时内给予删除，不得用于其他任何用途，否则后果自负。基于互联网的特殊性，平台无法对用户传输的作品、信息、内容的权属或合法性、安全性、合规性、真实性、科学性、完整权、有效性等进行实质审查；无论平台是否已进行审查，用户均应自行承担因其传输的作品、信息、内容而可能或已经产生的侵权或权属纠纷等法律责任。本站所有资源不代表本站的观点或立场，基于网友分享，根据中国法律《信息网络传播权保护条例》第二十二与二十三条之规定，若资源存在侵权或相关问题请联系本站客服人员，点此联系我们。关于更多版权及免责申明参见 版权及免责申明
网友评论
我要评论