802.3-2015 IEEE standard for Ethernet

【实例简介】
802.3-2015 IEEE standard for Ethernet,include section1-6 in 1 PDF file
Abstract: Ethernet local area network operation is specified for selected speeds of operation from Mb/s to 100 Gb/s using a common media access control (MAC)specification and management information base(MIB). The Carrier Sense Multiple Access with Collision Detection(CSMA/CD) MAC protocol specifies shared medium(half duplex)operation, as well as full duplex operation Speed specific Media Independent Interfaces(Mlls)allow use of selected Physical Layer devices PHY for operation over coaxial, twisted pair or fiber optic cables, or electrical backplanes System considerations for multisegment shared access networks describe the use of Repeaters which are defined for operational speeds up to 1000 Mb/s Local Area Network(LAN)operation is supported at all speeds. Other specified capabilities include: various PhY types for access networks, PHYs suitable for metropolitan area network applications and the provision of power over selected twisted pair PHY types Keywords: 10BASE; 100BASE; 1000BASE; 10GBASE; 40GBASE; 100GBASE, Fast Ethernet 10 Gigabit Ethernet; 40 Gigabit Ethernet; 100 Gigabit Ethernet; attachment unit interface; AUI Auto Negotiation; Backplane Ethernet; data processing; DTE Power via the MDI; EPON; Ethernet Ethernet in the First Mile; Ethernet passive optical network; Fast Ethernet; Gigabit Ethernet; GMII IEEE 802.3 TM; information exchange; local area network; management; medium dependent interface: media independent interface; MDI; MIB; MIl; XGMI: PHY; physical coding sublayer Physical Layer; physical medium attachment; PMA; Power over Ethernet; repeater; type field VLAN TAG The Institute of Electrical and Electronics Engineers, Inc 3 Park Avenue. new york. NY 10016-5997 USA Copyright c 2016 by the Institute of electrical and electronics engineers, Inc All rights reserved. Published 4 March 2016. Printed in the United states of America IEEE and 802 are registered trademarks in the U.s. Patent Trademark Office, owned by The Institute of Electrical and Electronics Engineers, Incorporated PDE ISBN ISBN 18781504 4-0078-7sTD20500 400794 STDPD20500 IEEE Prohibits discrimination, harassment and bullying ormoreinformationvisithttp://ww.ieee.orgmeb/aboutus/whatis/policies/p9-26.html No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. Important Notices and disclaimers concerning ieeE Standards documents ieee documents are made available for use subject to important notices and legal disclaimers. These notices and disclaimers, or a reference to this page, appear in all standards and may be found under the heading Important Notice"or Important Notices and Disclaimers Concerning IEEE Standards Documents Notice and Disclaimer of Liability Concerning the Use of IEEE Standards Documents IEEE Standards documents(standards, recommended practices, and guides ), both full-use and trial-use, are developed within IEee Societies and the Standards Coordinating Committees of the IEEE Standards Association ("IEEE-SA) Standards Board. IEEE (the Institute )develops its standards through a consensus development process, approved by the American National Standards Institute (ANSP"), which brings together volunteers representing varied viewpoints and interests to achieve the final product Volunteers are not necessarily members of the Institute and participate without compensation from iEFF While ieee administers the process and establishes rules to promote fairness in the consensus development process, ieee does not independently evaluate, test, or verify the accuracy of any of the information or the soundness of any judgments contained in its standard ieee does not warrant or represent the accuracy or content of the material contained in its standards, and expressly disclaims all warranties (expreSs, implied and statutory) not included in this or any other document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, iEEE disclaims any and all conditions relating to: results; and workmanlike effort IFFE Standards documents are supplied“ASIS”and“ WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an ieee standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEeE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalfof. any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given Ieee standard IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL. SPECIAL EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES: LOSS OF USE DATAOR PROFITS: OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD. EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE Translations The ieeE consensus development process involves the review of documents in English only. In the event that an IEee standard is translated, only the English version published by ieee should be considered the approved IEEE standard Copyright C 2016 IEEE. All rights reserved Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of ieee At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of ieee Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, ieee does not provide consulting information or advice pertaining to ieeE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests. it is important that any responses to comments and questions also receive the concurrence of a balance of interests for this reason ieee and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed For the same reason, ieee does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group Comments on standards should be submitted to the following address Secretary, IEEE-SA Standards Board 445 Hoes lane Piscataway. NJ USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance lo any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. ieeE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so Copyrights ieee draft and approved standards are copyrighted by IEEE under U.s. and international copyright laws They are made available by ieee and are adopted for a wide variety of both public and private uses. These nclude both use, by reference, in laws and regulations, and use in private self-regulation, standardization and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, ieee does not waive any rights in copyright to the documents Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center. Customer Service. 222 Rosewood Drive Danvers. MA 01923 USA: +19787508400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained througl the Copyright Clearance Center. Copyright C 2016 IEEE. All rights reserved Updating of IEEE Standards documents USers of ieee Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments corrigenda, or errata. An official ieee document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect Every Ieee standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-Sa Website at http:/ieeexploreieee.org/xpl/standards.jsporcontactIeeeattheaddresslistedpreviouslyFormore information about the IEee-SA or IEEE's standards development process, visit the IEEE-SA Website at http://standards.ieee.org Errata Errata, if any, for all ieeE standards can be accessed on the ieee-Sa Website at the following URL httpstandardsieeeorg/findstds/errata/index.htmlUsersareencouragedtocheckthisurlforerrata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter overed by patent rights. By publication of this standard, no position is taken by the ieee with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance then the statement is listed on the ieee SaWebsiteathttp://standards.ieeeorg/about/sasb/patcom/patents.htmlLettersofAssurancemayindicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses Essential Patent Claims may exist for which a Letter of assurance has not been received. The IEeE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the Ieee Standards Association Copyright C 2016 IEEE. All rights reserved Participants The following individuals were officers and members of the iffF 802.3 working group at the beginning of the ieee 802. 3bx working group ballot David J Law, IEEE 802. 3 Working Group chair Adam Healey, IEEE 802.3 Working Group vice-Chair Pete Anslow, IEEE 802.3 Working Group Secretary Steven B Carlson, IEEE 802.3 Working Group Executive Secretary Valerie Maguire, IEEE 802.3 Working Group Treasurer Adam Healey, IEEE P802.3(IEEE 802. 3bx) Task Force Chair and Editor-in-Chier Valerie Maguire, IEEE P802.3(EEF 802.3bx) Task Force Recording Secretary and Section Editor Pete Anslow, IEEE P802.3(IEEE 802.3bx) Task Force Section Editor Marek Hajduczenia, IEEE P802. 3 (IEEE 802. 3bx) Task Force Section Editor Historical participants The following individuals participated in the iEee 802.3 working group during various stages of the standards development. Since the initial publication, many IEEE standards have added functionality or provided updates to material included in this standard. Included is a historical list of participants who have dedicated their valuable time, energy, and knowledge to the creation of this material IEEE Std 802.3 document Date approved by IEEE and aNSI Officers at the time of working group ballot IEEE Std 802.3-1985, Origi 23 June 1983 (IEEE) Donald C. Loughry, Working Group chair nal l0 Mb/s standard. mac 31 December 1984 PLS. AUL. IOBASE5 (ANSI IEEE Std 802.3a-1988 15 November 1985 Donald C. Loughry, Working Group chair Clause 10), 10 Mb/S MAU IEEE Alan flatman task force Chair 10BASE2 28 December 1987 (ANSI IEEE Std 802.3b-1985 19 September 1985 Donald C Loughry, Working Group Chair Clause 11), 10 Mb!'s Broad (EEE Menachem abraham. Task force chair band MAU. 10BROAD36 28 February 1986(ANSI) IEEE Std802.3c-1985(9.1 12 Dcccmbcr 1985 Donald C Loughry, Working Group Chair 9. 8),10 Mb/s Baseband (IEEE Geoffrey O. Thompson, Task Force chair Repeater 4 June 1986(ANSI) IEEE Std802.3d-1987(9.9 10 December 1987 Donald C. Loughry, Working Group chair 10 Mb/s Fiber MAu. foirl IEEE Steven moustakas. Task force chair 9 February 1989(ANSD) IEEE Std 802.3e-1987 l1 June 1987(IEEE) Donald C. Loughry, Working Gro ( Clause 12), I Mb/s mau and 15 December 1987 Robert Galin Task Force Chaii.oup chail Hub bases (ANSI IEEE Std 802.3h-1990 28 September 1990 Donald C. Loughry, Working group chair Clause 5), 10 Mb/s Layer Andy J. luque Task Force Chair Management, DTE 11 March 1991(ANSD IEEE Std 802.31-1990 28 September 1990 Donald C. Loughry, Working Group Chair Clauses 13 and 14).10 Mb/s (IEEE Patricia Thaler, Task Force Chair(initial UTP MAU. 10 BASE-T 11 March 1991(ANSD Richard Anderson, Task Force Chair(final) IFEF Std 802.31-1993 15 September 1993 Patricia Thaler, Working Group Chair (Clauses 15-18), 10 Mb/s (IEEE) Keith Amundsen, Task Force Chair(initial Fiber maus 15 March 1994(ANSI) Frederick Scholl, Task Force Chair (final) IOBASE-FP. IOBASE-FB Michaele. lee. technical editor ant d lOBASE-FL Copyright C 2016 IEEE. All rights reserved IEEE Std 802.3 document Date approved b IEEE and aNSi Officers at the time of working group ballot IEEE Std 802. 3k-1993 17 September 1992 Patricia Thaler, Working Group chair (Clausc 19), 10 Mb/s Layc IEEE) Joseph s Skorupa, Task Force Chair Management, Repeaters 8 March 1993 (ANSI) Geoffrey O. Thompson, Vice Chair and Editor IEEE Std802.3l-1992(14.10), 17 September 1992 Patricia Thaler, Working Group chair 10 Mb/s Pics Proforma IEEE Mike Armstrong, Task Force Chair and editor 1OBASE-T MAU 23 February 1993(ANSI) Paul Nikolich, Vice chair William randle editorial Coordinator IEEE Std 802.3m-1995 21 September 1995 Patricia Thaler, Working Group Chair Maintenance 2 (IEEE) Gary robinson, Maintenance chair 16 July 1996(ANSI) IEEE Std 802.3n-1995 21 September 1995 icia Thaler, Working Group Chair Maintenance 3 (IEEE) Robinson. Maintenance Chair 4 April 1996(ANSD) IEEE Std 802.3p-1993 Clause 20), Management, 10 4 January 1994(ANSI) Joseph S Skorupa, Task Force Chair Mb/s Integrated MAUs Geoffrey o. Thompson, vice Chair and editor IEEE Std 802.3g-1993 17 June 1993(IEEE) Patricia Thaler, Working group chair Clause 5), 10 Mb/s Layer 4 January 1994(ANSI) Joseph S Skorupa, Task Force Chair Management. GDMO Format Geoffrey O. Thompson, Vice Chair and Editor IEEE Std802.3r-1996(8.8) 29 July 1996 (IEEE) Patricia Thaler, Working Group chair Type 10BASE5 Medium 6 January 1997(ANSI) Imre Juhasz, Task Force Chair Attachment Unit PIcs William Randle. Task force editor proforma IEEE Std 802.3s-1995 21 September 1995 Geoffrey o. Thompson, Working group chair Maintenance 4 Gary robinson, Maintenance chair 8 April 1996(ANSI) IEEE Std802.3t-1995,1209 14 June 1995 (IEEE) Geoffrey O. Thompson, Working Group Chair in formative annex to 12 January 1996(ANSI Jacques christ, Task Force Chair IOBASE-T IEEE Std 802.3u-1995 14 June 1995 (IEEE Geoffrey O. Thompson, Working Group chair Clauses 21-30), Type 4 April 1996(ANSD Peter Tarrant, Task Force Chair(Phase 1) 100BASE-T MAC parame- Howard Frazier, Task Force Chair(Phase 2 ters, Physical Layer, MAUS Paul Sherer, Task Force Editor-in-Chief (Phase 1) and Repeater for 100 Mb/s Colin Mick, Tusk Force Comment Editor. hief (Phase 2) Howard ohnson. Task force editor -in Operation IEEE Std802.3v-1995,15092 12 December 1995 Geoffrey O. Thompson, Working Group Chair informative annex to IEFF) Larry nicholson. task force chair IOBASE-T 16 July 1996(ANSI) IEEE Std 802.3x-1997 and 20 March 1997(IEEE) Geoffrey O. Thompson, Working Group chair IEEE Std 802.3y-1997(Revi- 5 September 1997(ANSI David J Law, Working Group vice Chair sions to ieee std 802. 3 Rich Seifert, Task Force Chair and Editor (802.3x) Clauses 31 and 32), Full J. Scott Carter, Task Force Chair(802. 3y Duplex Operation and lype Colin Mick, Task Force Editor (802. 3v) 100BASE-T2 IEEE Std 802.3z-1998 25 June 1998(IEEE) Geoffrey o. Thompson, working g Chair ( Clauses 34-39, 41-42), Type David .Law, Working group vice chair 1000BASE-X MAC Parame Howard m. frazier r. Task Force chai ters, Physical Layer, Repeater, Howard W. Johnson Task Force editor and management parameters for 1000 Mb/s Operation IEEE Std 802.3aa-1998 25 June 1998(IEEE) Geoffrey O. Thompson, Working Group chair Maintenance 5 Colin mick. task force editor IEEE Std 802.3ab-1999 26 June 1999(IEEE) Geoffrey O. Thompson, Working Group Chair ( Clause 40), Physical Layer David J Law, Working Group vice chair Parameters and specifications Robert m. grow, Working Group Secretary for 1000 Mb/s Operation Over George Eisler, Tusk Force Chat 4 Pair of Category 5 Balanced Colin mick. Task force editor Copper Cabling, Type 1000BASE-T Copyright C 2016 IEEE. All rights reserved IEEE Std 802.3 document Date approved b IEEE and aNSi Officers at the time of working group ballot IEEE Std 802. 3ac-1998 16 September 1998 Geoffrey O. Thompson, Working Group chair framc Extensions for virtual IEEE) David J. Law, Working Group vice Chair Bridged Local Area Network Andy J Luque, Working Group Secretary LAN) Tagging on IEEE Ian Crayford, Task Force Chair 802 3 Networks Rich Seifert. Task Force editor IEEE Std 802.3ad-2000 30 March 2000(IEEE) Geoffrey O. Thompson, Working Graup Chair Clause 43), Aggregation of David J Law, Working group vice chair Multiple link Robert m. grow, Working Group Secretary Segments Steven haddock. lask force chair Tony jeffree Tusk Force Co-Editor Rich Seifert. Task Force Coeditor EEE Std802.3-2002 14 January 2002 (IEEE) Geoffrey O. Thompson, Working Group Chair (EEE 802.3ag, Maintenance David J Law, Working Group vice Chair 6, Revision of the base), Car Robert m. grow, Working Group Secretary rier Sense Multiple access with Collision detection (CSMA/CD) access method and Physical La specifications IEEE Std 802. 3ae-2002 13 June 2002 (IEEE) Geoffrey o. thompson, Working group chair Clauses 44-53)Media David J Law, Working Group vice Chair Access Control(MAC) Robert m. grow, Working Group Secretar Parameters, Physical L R. Jonathan Thatcher. Task Force Chair and management parameters Stephen haddock, Task Force Vice Chair for 10 Gb/s Opcration Bradley j. Booth, Task Force Editor Lacreshia Laningham. Task force assistant editor Benjamin Brown, Logic Truck Chair Walter Thirion, Optical Track Chair IEEE Std 802.3af-2003 12 June 2003 (IEEe) Geoffrey o. Thompson, Working Group Chair(Phase 1) ( Clause 33)Data Terminal Robert m. grow, Working Group Chair(Phase 2) Equipment (dte) Power via David J Law, Working Group vice chair Media Dependent Interface Robert M. Grow, Working Group Secretary(Phase 1) (MDI Steven B Carlson, Working Group Secretary(Phase 2) Steven B. Carlson. Task Force Chair Michael S McCormack, Task Force Editor(Phase 1) John J. Jetzt. Task Force EditorPhase 2 Chad M. Jones, Task Force Comment Editor IEEE Std 802. 3ah-2004 6 April 2005 (Ieee) Robert M. Grow, Working Group chair Media Access control param David J Law, Working Group Vice Chair eters, Physical Layers, and Steven B Carlson, Working Group Secretary Management Parameters for Howard Frazier. task Force chair Subscriber Acccss nctworks Wael W. Diab, Task Force Editor-in-Chief Hugh Barrass, Task Force Vice-Chair S Scott Simon, Task Force Recording secretar Behrooz Rezvani, Task Force Executive Secretary IEEE Std 802.3aj-2003 September 2003 Robert m. Grow, Working Group Chair Maintenance 7 IEEE David J Law, Working group vice Chair, Task Force Chair Steven B Carlson, Working Group Secretary Catherine K. n. berger, Task Force Editor IEEE Std 802.3ak-2004, Phys- 9 February 2004(IEEE) Robert M. Grow, Working Group Chair ical laycr and managcment David J Law, Working Group Vice Chair Parameters for 10Gb/s opera Steven B Carlson, Working Group Secretary tion, Type 1OGBASE-CX4 Daniel Dove Task Force chai Howard A. Baumer Task force editor IEEE Std 802. 3-2005 9 June 2005 (IEEE) Robert m. Grow, Working Group Chair (IEEE 802.3REVam, Revi David J Law, Working Group vice Chair sion of the base ), Carrier Wael w. Diab. Secretary Sense Multiple Access with Steven B. Carlson, Working Group Executive Secretary Collision detection Piers dawe. Review editor SMA/CD)access method and Physical layer specifications 8 Copyright C 2016 IEEE. All rights reserved IEEE Std 802.3 document Date approved b IEEE and aNSi Officers at the time of working group ballot IEEE Std 802.3an-2006, Phys 8 June 2006(IEEE) Robert m. Grow, Working Group chair ical Layer and Management David J Law, Working group vice chair Parameter for 10 Gb/s Opera Wael William Diab, Working Group Secretary tion, Type 10GBASE-T Steven B. Carlson, Working Group Executive Secretary Bradley booth, Task Force Chair Sanjay Kasturia, Task Force Editor-in Chief George Eisler, Task Force Recording Secretary IEEE Std 802.3ap-2007 22 March 2007(IEEE) Robert M. Grow, Working Group Chain Ethernet Operation over David I aw, Working Group Vice-Chair Electrical Backplanes Wael w. Diab, Working group secretary Steven B Carlson, Working Group Executive Secretary Bradley Booth, Working Group Treasurer Adam Healey, Task Force Chair John d'Ambrosia. Task force secreta Schelto van Doorn, Task Force Editor-in-Chief (phase 1) Ilango S Ganga, Task Force Editor-in-Chief (Phase 2, IEEE Std 802.3aq-2006 15 September 2006 Robert m. grow, Working Group chair Physical layer and (IEEE) David J Law, Working Group vice Chair Management parameters for Wael William Diab, Working Group Secretary 10 Gb/s Operation, Type Steven B Carlson, Working Group Executive Secretary lOGBASE-LRM David G. Cunningham. Task force chair Nick Weiner, Task Force Editor Piers Dawe, lask Force Contributing editor IEEE Std 802.3as-2006 15 September 2006 Robert M. grow, Working group Chair Frame format extensions (IEEE) David J Law, Working Group Vice Chair Wael william Diab, Working Group se Steven B. Carlson, Working Group Executive Secretary Kevin Q Daines, Task Force Chair Glenn w parsons, lask force editor IEEE Std 802. 3-2005/ Cor 1 8 June 2006 (IEEE Robert m. grow, Working Group chair 2006(IEEE 802.3au), dtE David J Law, Working Group Vice Chair, Task Force Editor Power via MDl Isolation Wael w. Diab, Working Group Secretar corrigendum Steven B. Carlson, Working Group Executive Secretary IEEE Std 802. 3-2005/Cor 2 7 Junc 2007 (IEEE) Robert m. grow, Working Group chair 2007(IEEE802.3aw David J Law, Working Group Vice Chair, Task Force editor 10GBASE-T corrigendum Wael W. Diab, Working group Secretary Steven B Carlson, Working Group Executive Secretary Bradley Booth, Working Group Treasurer IEEE Std 802.3-2008 26 September 2008 Robert m. Grow, Working Group Chair (IEEE 802.3ay), Maintenance (IEEE) David J. Law, Working Group vice Chair Task Force editor #y(Revision of the base) Wael william Diab, Working group secretary Carrier Sense Multiple Access Steven B Carlson, Working Group Executive Secretary with Collision detection Bradley Booth, Working Group Treasurer (CSMA/CD) access method and Physical Layer specifications IEEE Std 802.3at-2009 Data 11 September 2009 David J Law, Working Group Chair Terminal Equipment (TE) (IEEE Wael William Diab, Working Group vice Chair Power via the Media Depen Adam healey. Working gre g oup se dent Interface (MDD Steven B Carlson, Working Group Executive Secretary Enhancements Bradley booth, Working Group Treasurer Mike Mccormack. Task Force chair D. Matthew Landry, Task Force Chief editor Chad Jones, Task Force Commment editor IEEE Std 802.3av-2009 11 September 2009 David J Law, Working group chair Physical Layer Specifications (IEEE) Wael William Diab, Working group Vice Chair and management Parameters Adam Healey, Working Group Secretary for 10 Gb/s Passive Optical Steven B Carlson, Working Group Executive Secretary Networks Bradley Booth, Working Group Treasurer Glen Kramer. Task Force che Duane Remin, Task Force Chief editor Marek Hajduczenia, Task Force Assistant Editor Copyright C 2016 IEEE. All rights reserved 【实例截图】
【核心代码】