实例介绍
【实例简介】
【实例截图】
【核心代码】
/*-------------------------------------------------------------------*/
/* fwlib32.cs */
/* */
/* CNC/PMC Data Window Library for FOCAS1/Ethernet */
/* */
/* Copyright (C) 2002-2011 by FANUC CORPORATION All rights reserved. */
/* */
/*-------------------------------------------------------------------*/
using System;
using System.Runtime.InteropServices;
public class Focas1
{
/* Axis define */
#if FS30D
public const short MAX_AXIS = 32;
#elif M_AXIS2
public const short MAX_AXIS = 24;
#elif FS15D
public const short MAX_AXIS = 10;
#else
public const short MAX_AXIS = 8;
#endif
public const short ALL_AXES = (-1);
public const short ALL_SPINDLES = (-1);
public const short EW_OK = (short)focas_ret.EW_OK;
/* Error Codes */
public enum focas_ret
{
EW_PROTOCOL = (-17), /* protocol error */
EW_SOCKET = (-16), /* Windows socket error */
EW_NODLL = (-15), /* DLL not exist error */
EW_BUS = (-11), /* bus error */
EW_SYSTEM2 = (-10), /* system error */
EW_HSSB = (-9), /* hssb communication error */
EW_HANDLE = (-8), /* Windows library handle error */
EW_VERSION = (-7), /* CNC/PMC version missmatch */
EW_UNEXP = (-6), /* abnormal error */
EW_SYSTEM = (-5), /* system error */
EW_PARITY = (-4), /* shared RAM parity error */
EW_MMCSYS = (-3), /* emm386 or mmcsys install error */
EW_RESET = (-2), /* reset or stop occured error */
EW_BUSY = (-1), /* busy error */
EW_OK = 0, /* no problem */
EW_FUNC = 1, /* command prepare error */
EW_NOPMC = 1, /* pmc not exist */
EW_LENGTH = 2, /* data block length error */
EW_NUMBER = 3, /* data number error */
EW_RANGE = 3, /* address range error */
EW_ATTRIB = 4, /* data attribute error */
EW_TYPE = 4, /* data type error */
EW_DATA = 5, /* data error */
EW_NOOPT = 6, /* no option error */
EW_PROT = 7, /* write protect error */
EW_OVRFLOW = 8, /* memory overflow error */
EW_PARAM = 9, /* cnc parameter not correct error */
EW_BUFFER = 10, /* buffer error */
EW_PATH = 11, /* path error */
EW_MODE = 12, /* cnc mode error */
EW_REJECT = 13, /* execution rejected error */
EW_DTSRVR = 14, /* data server error */
EW_ALARM = 15, /* alarm has been occurred */
EW_STOP = 16, /* CNC is not running */
EW_PASSWD = 17, /* protection data error */
/*
Result codes of DNC operation
*/
DNC_NORMAL = (-1), /* normal completed */
DNC_CANCEL = (-32768), /* DNC operation was canceled by CNC */
DNC_OPENERR = (-514), /* file open error */
DNC_NOFILE = (-516), /* file not found */
DNC_READERR = (-517) /* read error */
};
/*--------------------*/
/* */
/* Structure Template */
/* */
/*--------------------*/
/*-------------------------------------*/
/* CNC: Control axis / spindle related */
/*-------------------------------------*/
/* cnc_actf:read actual axis feedrate(F) */
/* cnc_acts:read actual spindle speed(S) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBACT
{
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2)]
public short[] dummy; /* dummy */
public int data; /* actual feed / actual spindle */
}
/* cnc_acts2:read actual spindle speed(S) */
/* (All or specified ) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBACT2
{
public short datano; /* spindle number */
public short type; /* dummy */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 4)]
public int[] data; /* spindle data */
}
/* cnc_absolute:read absolute axis position */
/* cnc_machine:read machine axis position */
/* cnc_relative:read relative axis position */
/* cnc_distance:read distance to go */
/* cnc_skip:read skip position */
/* cnc_srvdelay:read servo delay value */
/* cnc_accdecdly:read acceleration/deceleration delay value */
/* cnc_absolute2:read absolute axis position 2 */
/* cnc_relative2:read relative axis position 2 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBAXIS
{
public short dummy; /* dummy */
public short type; /* axis number */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] data; /* data value */
}
/* cnc_rddynamic:read all dynamic data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class FAXIS
{
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] absolute; /* absolute position */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] machine; /* machine position */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] relative; /* relative position */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] distance; /* distance to go */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class OAXIS
{
public int absolute; /* absolute position */
public int machine; /* machine position */
public int relative; /* relative position */
public int distance; /* distance to go */
}
#if (!ONO8D)
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBDY_1
{
public short dummy;
public short axis; /* axis number */
public short alarm; /* alarm status */
public short prgnum; /* current program number */
public short prgmnum; /* main program number */
public int seqnum; /* current sequence number */
public int actf; /* actual feedrate */
public int acts; /* actual spindle speed */
public FAXIS pos = new FAXIS();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBDY_2
{
public short dummy;
public short axis; /* axis number */
public short alarm; /* alarm status */
public short prgnum; /* current program number */
public short prgmnum; /* main program number */
public int seqnum; /* current sequence number */
public int actf; /* actual feedrate */
public int acts; /* actual spindle speed */
public OAXIS pos = new OAXIS();
}
#else
[StructLayout(LayoutKind.Sequential, Pack=4)]
public class ODBDY_1
{
public short dummy ;
public short axis ; /* axis number */
public short alarm ; /* alarm status */
public int prgnum ; /* current program number */
public int prgmnum ; /* main program number */
public int seqnum ; /* current sequence number */
public int actf ; /* actual feedrate */
public int acts ; /* actual spindle speed */
public FAXIS pos = new FAXIS();
}
[StructLayout(LayoutKind.Sequential, Pack=4)]
public class ODBDY_2
{
public short dummy ;
public short axis ; /* axis number */
public short alarm ; /* alarm status */
public int prgnum ; /* current program number */
public int prgmnum ; /* main program number */
public int seqnum ; /* current sequence number */
public int actf ; /* actual feedrate */
public int acts ; /* actual spindle speed */
public OAXIS pos = new OAXIS();
}
#endif
/* cnc_rddynamic2:read all dynamic data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBDY2_1
{
public short dummy;
public short axis; /* axis number */
public int alarm; /* alarm status */
public int prgnum; /* current program number */
public int prgmnum; /* main program number */
public int seqnum; /* current sequence number */
public int actf; /* actual feedrate */
public int acts; /* actual spindle speed */
public FAXIS pos = new FAXIS();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBDY2_2
{
public short dummy;
public short axis; /* axis number */
public int alarm; /* alarm status */
public int prgnum; /* current program number */
public int prgmnum; /* main program number */
public int seqnum; /* current sequence number */
public int actf; /* actual feedrate */
public int acts; /* actual spindle speed */
public OAXIS pos = new OAXIS(); /* In case of 1 axis */
}
/* cnc_wrrelpos:set origin / preset relative axis position */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IDBWRR
{
public short datano; /* dummy */
public short type; /* axis number */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] data = new int[MAX_AXIS]; /* preset data */
}
/* cnc_prstwkcd:preset work coordinate */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IDBWRA
{
public short datano; /* dummy */
public short type; /* axis number */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] data = new int[MAX_AXIS]; /* preset data */
}
/* cnc_rdmovrlap:read manual overlapped motion value */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBOVL
{
public short datano; /* dummy */
public short type; /* axis number */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2 * MAX_AXIS)]
public int[] data; /* data value:[2][MAX_AXIS] */
}
/* cnc_rdspload:read load information of serial spindle */
/* cnc_rdspmaxrpm:read maximum r.p.m. ratio of serial spindle */
/* cnc_rdspgear:read gear ratio of serial spindle */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSPN
{
public short datano; /* dummy */
public short type; /* axis number */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 4)]
public short[] data; /* preset data */
}
/* cnc_rdposition:read tool position */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class POSELM
{
public int data; /* position data */
public short dec; /* place of decimal point of position data */
public short unit; /* unit of position data */
public short disp; /* status of display */
public char name; /* axis name */
public char suff; /* axis name preffix */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class POSELMALL
{
public POSELM abs = new POSELM();
public POSELM mach = new POSELM();
public POSELM rel = new POSELM();
public POSELM dist = new POSELM();
}
#if M_AXIS2
[StructLayout(LayoutKind.Sequential,Pack=4)]
public class ODBPOS
{
public POSELMALL p1=new POSELMALL();
public POSELMALL p2=new POSELMALL();
public POSELMALL p3=new POSELMALL();
public POSELMALL p4=new POSELMALL();
public POSELMALL p5=new POSELMALL();
public POSELMALL p6=new POSELMALL();
public POSELMALL p7=new POSELMALL();
public POSELMALL p8=new POSELMALL();
public POSELMALL p9=new POSELMALL();
public POSELMALL p10=new POSELMALL();
public POSELMALL p11=new POSELMALL();
public POSELMALL p12=new POSELMALL();
public POSELMALL p13=new POSELMALL();
public POSELMALL p14=new POSELMALL();
public POSELMALL p15=new POSELMALL();
public POSELMALL p16=new POSELMALL();
public POSELMALL p17=new POSELMALL();
public POSELMALL p18=new POSELMALL();
public POSELMALL p19=new POSELMALL();
public POSELMALL p20=new POSELMALL();
public POSELMALL p21=new POSELMALL();
public POSELMALL p22=new POSELMALL();
public POSELMALL p23=new POSELMALL();
public POSELMALL p24=new POSELMALL();
// In case of 24 axes.
// if you need the more information, you must be add the member.
}
#elif FS15D
[StructLayout(LayoutKind.Sequential,Pack=4)]
public class ODBPOS
{
public POSELMALL p1=new POSELMALL();
public POSELMALL p2=new POSELMALL();
public POSELMALL p3=new POSELMALL();
public POSELMALL p4=new POSELMALL();
public POSELMALL p5=new POSELMALL();
public POSELMALL p6=new POSELMALL();
public POSELMALL p7=new POSELMALL();
public POSELMALL p8=new POSELMALL();
public POSELMALL p9=new POSELMALL();
public POSELMALL p10=new POSELMALL();
// In case of 10 axes.
// if you need the more information, you must be add the member.
}
#else
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBPOS
{
public POSELMALL p1 = new POSELMALL();
public POSELMALL p2 = new POSELMALL();
public POSELMALL p3 = new POSELMALL();
public POSELMALL p4 = new POSELMALL();
public POSELMALL p5 = new POSELMALL();
public POSELMALL p6 = new POSELMALL();
public POSELMALL p7 = new POSELMALL();
public POSELMALL p8 = new POSELMALL();
// In case of 8 axes.
// if you need the more information, you must be add the member.
}
#endif
/* cnc_rdhndintrpt:read handle interruption */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBHND_data
{
public POSELM input = new POSELM(); /* input unit */
public POSELM output = new POSELM(); /* output unit */
}
#if M_AXIS2
[StructLayout(LayoutKind.Sequential,Pack=4)]
public class ODBHND
{
public ODBHND_data p1=new ODBHND_data();
public ODBHND_data p2=new ODBHND_data();
public ODBHND_data p3=new ODBHND_data();
public ODBHND_data p4=new ODBHND_data();
public ODBHND_data p5=new ODBHND_data();
public ODBHND_data p6=new ODBHND_data();
public ODBHND_data p7=new ODBHND_data();
public ODBHND_data p8=new ODBHND_data();
public ODBHND_data p9=new ODBHND_data();
public ODBHND_data p10=new ODBHND_data();
public ODBHND_data p11=new ODBHND_data();
public ODBHND_data p12=new ODBHND_data();
public ODBHND_data p13=new ODBHND_data();
public ODBHND_data p14=new ODBHND_data();
public ODBHND_data p15=new ODBHND_data();
public ODBHND_data p16=new ODBHND_data();
public ODBHND_data p17=new ODBHND_data();
public ODBHND_data p18=new ODBHND_data();
public ODBHND_data p19=new ODBHND_data();
public ODBHND_data p20=new ODBHND_data();
public ODBHND_data p21=new ODBHND_data();
public ODBHND_data p22=new ODBHND_data();
public ODBHND_data p23=new ODBHND_data();
public ODBHND_data p24=new ODBHND_data();
// In case of 24 axes.
// if you need the more information, you must be add the member.
}
#elif FS15D
[StructLayout(LayoutKind.Sequential,Pack=4)]
public class ODBHND
{
public ODBHND_data p1=new ODBHND_data();
public ODBHND_data p2=new ODBHND_data();
public ODBHND_data p3=new ODBHND_data();
public ODBHND_data p4=new ODBHND_data();
public ODBHND_data p5=new ODBHND_data();
public ODBHND_data p6=new ODBHND_data();
public ODBHND_data p7=new ODBHND_data();
public ODBHND_data p8=new ODBHND_data();
public ODBHND_data p9=new ODBHND_data();
public ODBHND_data p10=new ODBHND_data();
// In case of 10 axes.
// if you need the more information, you must be add the member.
}
#else
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBHND
{
public ODBHND_data p1 = new ODBHND_data();
public ODBHND_data p2 = new ODBHND_data();
public ODBHND_data p3 = new ODBHND_data();
public ODBHND_data p4 = new ODBHND_data();
public ODBHND_data p5 = new ODBHND_data();
public ODBHND_data p6 = new ODBHND_data();
public ODBHND_data p7 = new ODBHND_data();
public ODBHND_data p8 = new ODBHND_data();
// In case of 8 axes.
// if you need the more information, you must be add the member.
}
#endif
/* cnc_rdspeed:read current speed */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class SPEEDELM
{
public int data; /* speed data */
public short dec; /* decimal position */
public short unit; /* data unit */
public short disp; /* display flag */
public byte name; /* name of data */
public byte suff; /* suffix */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSPEED
{
public SPEEDELM actf = new SPEEDELM(); /* actual feed rate */
public SPEEDELM acts = new SPEEDELM(); /* actual spindle speed */
}
/* cnc_rdsvmeter:read servo load meter */
/* cnc_rdspmeter:read spindle load meter */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class LOADELM
{
public int data; /* load meter */
public short dec; /* decimal position */
public short unit; /* unit */
public byte name; /* name of data */
public byte suff1; /* suffix */
public byte suff2; /* suffix */
public byte reserve; /* reserve */
}
#if M_AXIS2
[StructLayout(LayoutKind.Sequential,Pack=4)]
public class ODBSVLOAD
{
public LOADELM svload1 = new LOADELM(); /* servo load meter */
public LOADELM svload2 = new LOADELM(); /* servo load meter */
public LOADELM svload3 = new LOADELM(); /* servo load meter */
public LOADELM svload4 = new LOADELM(); /* servo load meter */
public LOADELM svload5 = new LOADELM(); /* servo load meter */
public LOADELM svload6 = new LOADELM(); /* servo load meter */
public LOADELM svload7 = new LOADELM(); /* servo load meter */
public LOADELM svload8 = new LOADELM(); /* servo load meter */
public LOADELM svload9 = new LOADELM(); /* servo load meter */
public LOADELM svload10= new LOADELM(); /* servo load meter */
public LOADELM svload11= new LOADELM(); /* servo load meter */
public LOADELM svload12= new LOADELM(); /* servo load meter */
public LOADELM svload13= new LOADELM(); /* servo load meter */
public LOADELM svload14= new LOADELM(); /* servo load meter */
public LOADELM svload15= new LOADELM(); /* servo load meter */
public LOADELM svload16= new LOADELM(); /* servo load meter */
public LOADELM svload17= new LOADELM(); /* servo load meter */
public LOADELM svload18= new LOADELM(); /* servo load meter */
public LOADELM svload19= new LOADELM(); /* servo load meter */
public LOADELM svload20= new LOADELM(); /* servo load meter */
public LOADELM svload21= new LOADELM(); /* servo load meter */
public LOADELM svload22= new LOADELM(); /* servo load meter */
public LOADELM svload23= new LOADELM(); /* servo load meter */
public LOADELM svload24= new LOADELM(); /* servo load meter */
}
#elif FS15D
[StructLayout(LayoutKind.Sequential,Pack=4)]
public class ODBSVLOAD
{
public LOADELM svload1 = new LOADELM(); /* servo load meter */
public LOADELM svload2 = new LOADELM(); /* servo load meter */
public LOADELM svload3 = new LOADELM(); /* servo load meter */
public LOADELM svload4 = new LOADELM(); /* servo load meter */
public LOADELM svload5 = new LOADELM(); /* servo load meter */
public LOADELM svload6 = new LOADELM(); /* servo load meter */
public LOADELM svload7 = new LOADELM(); /* servo load meter */
public LOADELM svload8 = new LOADELM(); /* servo load meter */
public LOADELM svload9 = new LOADELM(); /* servo load meter */
public LOADELM svload10= new LOADELM(); /* servo load meter */
}
#else
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSVLOAD
{
public LOADELM svload1 = new LOADELM(); /* servo load meter */
public LOADELM svload2 = new LOADELM(); /* servo load meter */
public LOADELM svload3 = new LOADELM(); /* servo load meter */
public LOADELM svload4 = new LOADELM(); /* servo load meter */
public LOADELM svload5 = new LOADELM(); /* servo load meter */
public LOADELM svload6 = new LOADELM(); /* servo load meter */
public LOADELM svload7 = new LOADELM(); /* servo load meter */
public LOADELM svload8 = new LOADELM(); /* servo load meter */
}
#endif
/* cnc_rdexecpt:read execution program pointer */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class PRGPNT
{
public int prog_no; /* program number */
public int blk_no; /* block number */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSPLOAD_data
{
public LOADELM spload = new LOADELM(); /* spindle load meter */
public LOADELM spspeed = new LOADELM(); /* spindle speed */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSPLOAD
{
public ODBSPLOAD_data spload1 = new ODBSPLOAD_data(); /* spindle load */
public ODBSPLOAD_data spload2 = new ODBSPLOAD_data(); /* spindle load */
public ODBSPLOAD_data spload3 = new ODBSPLOAD_data(); /* spindle load */
public ODBSPLOAD_data spload4 = new ODBSPLOAD_data(); /* spindle load */
}
/* cnc_rd5axmandt:read manual feed for 5-axis machining */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODB5AXMAN
{
public short type1;
public short type2;
public short type3;
public int data1;
public int data2;
public int data3;
public int c1;
public int c2;
public int dummy;
public int td;
public int r1;
public int r2;
public int vr;
public int h1;
public int h2;
}
/*----------------------*/
/* CNC: Program related */
/*----------------------*/
/* cnc_rddncdgndt:read the diagnosis data of DNC operation */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBDNCDGN
{
public short ctrl_word;
public short can_word;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 16)]
public char[] nc_file;
public ushort read_ptr;
public ushort write_ptr;
public ushort empty_cnt;
public uint total_size;
}
/* cnc_upload:upload NC program */
/* cnc_cupload:upload NC program(conditional) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBUP
{
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2)]
public short[] dummy; /* dummy */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 256)]
public char[] data; /* data */
} /* In case that the number of data is 256 */
/* cnc_buff:read buffer status for downloading/verification NC program */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBBUF
{
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2)]
public short[] dummy; /* dummy */
public short data; /* buffer status */
}
/* cnc_rdprogdir:read program directory */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class PRGDIR
{
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 256)]
public char[] prg_data; /* directory data */
} /* In case that the number of data is 256 */
/* cnc_rdproginfo:read program information */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBNC_1
{
public short reg_prg; /* registered program number */
public short unreg_prg; /* unregistered program number */
public int used_mem; /* used memory area */
public int unused_mem; /* unused memory area */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBNC_2
{
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 31)]
public char[] asc; /* ASCII string type */
}
/* cnc_rdprgnum:read program number under execution */
#if (!ONO8D)
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBPRO
{
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2)]
public short[] dummy; /* dummy */
public short data; /* running program number */
public short mdata; /* main program number */
}
#else
[StructLayout(LayoutKind.Sequential,Pack=4)]
public class ODBPRO
{
[MarshalAs(UnmanagedType.ByValArray,SizeConst=2)]
public short[] dummy ; /* dummy */
public int data ; /* running program number */
public int mdata ; /* main program number */
}
#endif
/* cnc_exeprgname:read program name under execution */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBEXEPRG
{
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 36)]
public char[] name; /* running program name */
public int o_num; /* running program number */
}
/* cnc_rdseqnum:read sequence number under execution */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSEQ
{
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2)]
public short[] dummy; /* dummy */
public int data; /* sequence number */
}
/* cnc_rdmdipntr:read execution pointer for MDI operation */
#if (!ONO8D)
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBMDIP
{
public short mdiprog; /* exec. program number */
public int mdipntr; /* exec. pointer */
public short crntprog; /* prepare program number */
public int crntpntr; /* prepare pointer */
}
#else
[StructLayout(LayoutKind.Sequential,Pack=4)]
public class ODBMDIP
{
public int mdiprog; /* exec. program number */
public int mdipntr; /* exec. pointer */
public int crntprog; /* prepare program number */
public int crntpntr; /* prepare pointer */
}
#endif
/* cnc_rdaxisdata:read various axis data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBAXDT_data
{
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string name = new string(' ', 4); /* axis name */
public int data; /* position data */
public short dec; /* decimal position */
public short unit; /* data unit */
public short flag; /* flags */
public short reserve; /* reserve */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBAXDT
{
public ODBAXDT_data data1 = new ODBAXDT_data();
public ODBAXDT_data data2 = new ODBAXDT_data();
public ODBAXDT_data data3 = new ODBAXDT_data();
public ODBAXDT_data data4 = new ODBAXDT_data();
public ODBAXDT_data data5 = new ODBAXDT_data();
public ODBAXDT_data data6 = new ODBAXDT_data();
public ODBAXDT_data data7 = new ODBAXDT_data();
public ODBAXDT_data data8 = new ODBAXDT_data();
public ODBAXDT_data data9 = new ODBAXDT_data();
public ODBAXDT_data data10 = new ODBAXDT_data();
public ODBAXDT_data data11 = new ODBAXDT_data();
public ODBAXDT_data data12 = new ODBAXDT_data();
public ODBAXDT_data data13 = new ODBAXDT_data();
public ODBAXDT_data data14 = new ODBAXDT_data();
public ODBAXDT_data data15 = new ODBAXDT_data();
public ODBAXDT_data data16 = new ODBAXDT_data();
public ODBAXDT_data data17 = new ODBAXDT_data();
public ODBAXDT_data data18 = new ODBAXDT_data();
public ODBAXDT_data data19 = new ODBAXDT_data();
public ODBAXDT_data data20 = new ODBAXDT_data();
public ODBAXDT_data data21 = new ODBAXDT_data();
public ODBAXDT_data data22 = new ODBAXDT_data();
public ODBAXDT_data data23 = new ODBAXDT_data();
public ODBAXDT_data data24 = new ODBAXDT_data();
public ODBAXDT_data data25 = new ODBAXDT_data();
public ODBAXDT_data data26 = new ODBAXDT_data();
public ODBAXDT_data data27 = new ODBAXDT_data();
public ODBAXDT_data data28 = new ODBAXDT_data();
public ODBAXDT_data data29 = new ODBAXDT_data();
public ODBAXDT_data data30 = new ODBAXDT_data();
public ODBAXDT_data data31 = new ODBAXDT_data();
public ODBAXDT_data data32 = new ODBAXDT_data();
public ODBAXDT_data data33 = new ODBAXDT_data();
public ODBAXDT_data data34 = new ODBAXDT_data();
public ODBAXDT_data data35 = new ODBAXDT_data();
public ODBAXDT_data data36 = new ODBAXDT_data();
public ODBAXDT_data data37 = new ODBAXDT_data();
public ODBAXDT_data data38 = new ODBAXDT_data();
public ODBAXDT_data data39 = new ODBAXDT_data();
public ODBAXDT_data data40 = new ODBAXDT_data();
public ODBAXDT_data data41 = new ODBAXDT_data();
public ODBAXDT_data data42 = new ODBAXDT_data();
public ODBAXDT_data data43 = new ODBAXDT_data();
public ODBAXDT_data data44 = new ODBAXDT_data();
public ODBAXDT_data data45 = new ODBAXDT_data();
public ODBAXDT_data data46 = new ODBAXDT_data();
public ODBAXDT_data data47 = new ODBAXDT_data();
public ODBAXDT_data data48 = new ODBAXDT_data();
public ODBAXDT_data data49 = new ODBAXDT_data();
public ODBAXDT_data data50 = new ODBAXDT_data();
public ODBAXDT_data data51 = new ODBAXDT_data();
public ODBAXDT_data data52 = new ODBAXDT_data();
public ODBAXDT_data data53 = new ODBAXDT_data();
public ODBAXDT_data data54 = new ODBAXDT_data();
public ODBAXDT_data data55 = new ODBAXDT_data();
public ODBAXDT_data data56 = new ODBAXDT_data();
public ODBAXDT_data data57 = new ODBAXDT_data();
public ODBAXDT_data data58 = new ODBAXDT_data();
public ODBAXDT_data data59 = new ODBAXDT_data();
public ODBAXDT_data data60 = new ODBAXDT_data();
public ODBAXDT_data data61 = new ODBAXDT_data();
public ODBAXDT_data data62 = new ODBAXDT_data();
public ODBAXDT_data data63 = new ODBAXDT_data();
public ODBAXDT_data data64 = new ODBAXDT_data();
public ODBAXDT_data data65 = new ODBAXDT_data();
public ODBAXDT_data data66 = new ODBAXDT_data();
public ODBAXDT_data data67 = new ODBAXDT_data();
public ODBAXDT_data data68 = new ODBAXDT_data();
public ODBAXDT_data data69 = new ODBAXDT_data();
public ODBAXDT_data data70 = new ODBAXDT_data();
public ODBAXDT_data data71 = new ODBAXDT_data();
public ODBAXDT_data data72 = new ODBAXDT_data();
public ODBAXDT_data data73 = new ODBAXDT_data();
public ODBAXDT_data data74 = new ODBAXDT_data();
public ODBAXDT_data data75 = new ODBAXDT_data();
public ODBAXDT_data data76 = new ODBAXDT_data();
public ODBAXDT_data data77 = new ODBAXDT_data();
public ODBAXDT_data data78 = new ODBAXDT_data();
public ODBAXDT_data data79 = new ODBAXDT_data();
public ODBAXDT_data data80 = new ODBAXDT_data();
public ODBAXDT_data data81 = new ODBAXDT_data();
public ODBAXDT_data data82 = new ODBAXDT_data();
public ODBAXDT_data data83 = new ODBAXDT_data();
public ODBAXDT_data data84 = new ODBAXDT_data();
public ODBAXDT_data data85 = new ODBAXDT_data();
public ODBAXDT_data data86 = new ODBAXDT_data();
public ODBAXDT_data data87 = new ODBAXDT_data();
public ODBAXDT_data data88 = new ODBAXDT_data();
public ODBAXDT_data data89 = new ODBAXDT_data();
public ODBAXDT_data data90 = new ODBAXDT_data();
public ODBAXDT_data data91 = new ODBAXDT_data();
public ODBAXDT_data data92 = new ODBAXDT_data();
public ODBAXDT_data data93 = new ODBAXDT_data();
public ODBAXDT_data data94 = new ODBAXDT_data();
public ODBAXDT_data data95 = new ODBAXDT_data();
public ODBAXDT_data data96 = new ODBAXDT_data();
public ODBAXDT_data data97 = new ODBAXDT_data();
public ODBAXDT_data data98 = new ODBAXDT_data();
public ODBAXDT_data data99 = new ODBAXDT_data();
public ODBAXDT_data data100 = new ODBAXDT_data();
public ODBAXDT_data data101 = new ODBAXDT_data();
public ODBAXDT_data data102 = new ODBAXDT_data();
public ODBAXDT_data data103 = new ODBAXDT_data();
public ODBAXDT_data data104 = new ODBAXDT_data();
public ODBAXDT_data data105 = new ODBAXDT_data();
public ODBAXDT_data data106 = new ODBAXDT_data();
public ODBAXDT_data data107 = new ODBAXDT_data();
public ODBAXDT_data data108 = new ODBAXDT_data();
public ODBAXDT_data data109 = new ODBAXDT_data();
public ODBAXDT_data data110 = new ODBAXDT_data();
public ODBAXDT_data data111 = new ODBAXDT_data();
public ODBAXDT_data data112 = new ODBAXDT_data();
public ODBAXDT_data data113 = new ODBAXDT_data();
public ODBAXDT_data data114 = new ODBAXDT_data();
public ODBAXDT_data data115 = new ODBAXDT_data();
public ODBAXDT_data data116 = new ODBAXDT_data();
public ODBAXDT_data data117 = new ODBAXDT_data();
public ODBAXDT_data data118 = new ODBAXDT_data();
public ODBAXDT_data data119 = new ODBAXDT_data();
public ODBAXDT_data data120 = new ODBAXDT_data();
public ODBAXDT_data data121 = new ODBAXDT_data();
public ODBAXDT_data data122 = new ODBAXDT_data();
public ODBAXDT_data data123 = new ODBAXDT_data();
public ODBAXDT_data data124 = new ODBAXDT_data();
public ODBAXDT_data data125 = new ODBAXDT_data();
public ODBAXDT_data data126 = new ODBAXDT_data();
public ODBAXDT_data data127 = new ODBAXDT_data();
public ODBAXDT_data data128 = new ODBAXDT_data();
}
/* cnc_rdspcss:read constant surface speed data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBCSS
{
public int srpm; /* order spindle speed */
public int sspm; /* order constant spindle speed */
public int smax; /* order maximum spindle speed */
}
/* cnc_rdpdf_drive:read program drive directory */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBPDFDRV
{
public short max_num; /* maximum drive number */
public short dummy;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 12)]
public string drive1 = new string(' ', 12);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 12)]
public string drive2 = new string(' ', 12);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 12)]
public string drive3 = new string(' ', 12);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 12)]
public string drive4 = new string(' ', 12);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 12)]
public string drive5 = new string(' ', 12);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 12)]
public string drive6 = new string(' ', 12);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 12)]
public string drive7 = new string(' ', 12);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 12)]
public string drive8 = new string(' ', 12);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 12)]
public string drive9 = new string(' ', 12);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 12)]
public string drive10 = new string(' ', 12);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 12)]
public string drive11 = new string(' ', 12);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 12)]
public string drive12 = new string(' ', 12);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 12)]
public string drive13 = new string(' ', 12);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 12)]
public string drive14 = new string(' ', 12);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 12)]
public string drive15 = new string(' ', 12);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 12)]
public string drive16 = new string(' ', 12);
}
/* cnc_rdpdf_inf:read program drive information */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ODBPDFINF
{
public int used_page; /* used capacity */
public int all_page; /* all capacity */
public int used_dir; /* used directory number */
public int all_dir; /* all directory number */
}
/* cnc_rdpdf_subdir:read directory (sub directories) */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class IDBPDFSDIR
{
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 212)]
public string path = new string(' ', 212); /* path name */
public short req_num; /* entry number */
public short dummy;
}
/* cnc_rdpdf_subdir:read directory (sub directories) */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ODBPDFSDIR
{
public short sub_exist; /* existence of sub directory */
public short dummy;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 36)]
public string d_f = new string(' ', 36); /* path name */
}
/* cnc_rdpdf_alldir:read directory (all files) */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class IDBPDFADIR
{
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 212)]
public string path = new string(' ', 212); /* path name */
public short req_num; /* entry number */
public short size_kind; /* kind of size */
public short type; /* kind of format */
public short dummy;
}
/* cnc_rdpdf_alldir:read directory (all files) */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ODBPDFADIR
{
public short data_kind; /* kinf of data */
public short year; /* last date and time */
public short mon; /* last date and time */
public short day; /* last date and time */
public short hour; /* last date and time */
public short min; /* last date and time */
public short sec; /* last date and time */
public short dummy;
public int dummy2;
public int size; /* size */
public int attr; /* attribute */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 36)]
public string d_f = new string(' ', 36); /* path name */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 52)]
public string comment = new string(' ', 52); /* comment */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 12)]
public string o_time = new string(' ', 12); /* machining time stamp */
}
/* cnc_rdpdf_subdirn:read file count the directory has */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBPDFNFIL
{
public short dir_num; /* directory */
public short file_num; /* file */
}
/* cnc_wrpdf_attr:change attribute of program file and directory */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IDBPDFTDIR
{
public uint slct; /* selection */
public uint attr; /* data */
}
/*---------------------------*/
/* CNC: NC file data related */
/*---------------------------*/
/* cnc_rdtofs:read tool offset value */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBTOFS
{
public short datano; /* data number */
public short type; /* data type */
public int data; /* data */
}
/* cnc_rdtofsr:read tool offset value(area specified) */
/* cnc_wrtofsr:write tool offset value(area specified) */
[StructLayout(LayoutKind.Explicit)]
public class OFS_1
{
[FieldOffset(0),
MarshalAs(UnmanagedType.ByValArray, SizeConst = 5)]
public int[] m_ofs = new int[5]; /* M Each */
[FieldOffset(0),
MarshalAs(UnmanagedType.ByValArray, SizeConst = 5)]
public int[] m_ofs_a = new int[5]; /* M-A All */
[FieldOffset(0),
MarshalAs(UnmanagedType.ByValArray, SizeConst = 5)]
public short[] t_tip = new short[5]; /* T Each, 2-byte */
[FieldOffset(0),
MarshalAs(UnmanagedType.ByValArray, SizeConst = 5)]
public int[] t_ofs = new int[5]; /* T Each, 4-byte */
} /* In case that the number of data is 5 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class OFS_2
{
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2 * 5)]
public int[] m_ofs_b = new int[10]; /* M-B All */
} /* In case that the number of data is 5 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class OFS_3
{
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 4 * 5)]
public int[] m_ofs_c = new int[20]; /* M-C All */
} /* In case that the number of data is 5 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class T_OFS_A
{
public short tip;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 4)]
public int[] data;
} /* T-A All */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class T_OFS_A_data
{
public T_OFS_A data1 = new T_OFS_A();
public T_OFS_A data2 = new T_OFS_A();
public T_OFS_A data3 = new T_OFS_A();
public T_OFS_A data4 = new T_OFS_A();
public T_OFS_A data5 = new T_OFS_A();
} /* In case that the number of data is 5 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class T_OFS_B
{
public short tip;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 8)]
public int[] data;
} /* T-B All */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class T_OFS_B_data
{
public T_OFS_B data1 = new T_OFS_B();
public T_OFS_B data2 = new T_OFS_B();
public T_OFS_B data3 = new T_OFS_B();
public T_OFS_B data4 = new T_OFS_B();
public T_OFS_B data5 = new T_OFS_B();
} /* In case that the number of data is 5 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTO_1_1
{
public short datano_s; /* start offset number */
public short type; /* offset type */
public short datano_e; /* end offset number */
public OFS_1 ofs = new OFS_1();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTO_1_2
{
public short datano_s; /* start offset number */
public short type; /* offset type */
public short datano_e; /* end offset number */
public OFS_2 ofs = new OFS_2();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTO_1_3
{
public short datano_s; /* start offset number */
public short type; /* offset type */
public short datano_e; /* end offset number */
public OFS_3 ofs = new OFS_3();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTO_2
{
public short datano_s; /* start offset number */
public short type; /* offset type */
public short datano_e; /* end offset number */
public T_OFS_A_data tofsa = new T_OFS_A_data();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTO_3
{
public short datano_s; /* start offset number */
public short type; /* offset type */
public short datano_e; /* end offset number */
public T_OFS_B_data tofsb = new T_OFS_B_data();
}
/* cnc_rdzofs:read work zero offset value */
/* cnc_wrzofs:write work zero offset value */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBZOFS
{
public short datano; /* offset NO. */
public short type; /* axis number */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] data = new int[MAX_AXIS]; /* data value */
}
/* cnc_rdzofsr:read work zero offset value(area specified) */
/* cnc_wrzofsr:write work zero offset value(area specified) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBZOR
{
public short datano_s; /* start offset number */
public short type; /* axis number */
public short datano_e; /* end offset number */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 7 * MAX_AXIS)]
public int[] data = new int[7 * MAX_AXIS]; /* offset value */
} /* In case that the number of axes is MAX_AXIS, the number of data is 7 */
/* cnc_rdmsptype:read mesured point value */
/* cnc_wrmsptype:write mesured point value */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBMSTP
{
public short datano_s; /* start offset number */
public short dummy; /* dummy */
public short datano_e; /* end offset number */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 7)]
public sbyte[] data = new sbyte[7]; /* mesured point value */
}
/* cnc_rdparam:read parameter */
/* cnc_wrparam:write parameter */
/* cnc_rdset:read setting data */
/* cnc_wrset:write setting data */
/* cnc_rdparar:read parameter(area specified) */
/* cnc_wrparas:write parameter(plural specified) */
/* cnc_rdsetr:read setting data(area specified) */
/* cnc_wrsets:write setting data(plural specified) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REALPRM
{
public int prm_val; /* data of real parameter */
public int dec_val; /* decimal point of real parameter */
}
#if M_AXIS2
[StructLayout(LayoutKind.Sequential,Pack=4)]
public class REALPRMS
{
public REALPRM rdata1=new REALPRM();
public REALPRM rdata2=new REALPRM();
public REALPRM rdata3=new REALPRM();
public REALPRM rdata4=new REALPRM();
public REALPRM rdata5=new REALPRM();
public REALPRM rdata6=new REALPRM();
public REALPRM rdata7=new REALPRM();
public REALPRM rdata8=new REALPRM();
public REALPRM rdata9=new REALPRM();
public REALPRM rdata10=new REALPRM();
public REALPRM rdata11=new REALPRM();
public REALPRM rdata12=new REALPRM();
public REALPRM rdata13=new REALPRM();
public REALPRM rdata14=new REALPRM();
public REALPRM rdata15=new REALPRM();
public REALPRM rdata16=new REALPRM();
public REALPRM rdata17=new REALPRM();
public REALPRM rdata18=new REALPRM();
public REALPRM rdata19=new REALPRM();
public REALPRM rdata20=new REALPRM();
public REALPRM rdata21=new REALPRM();
public REALPRM rdata22=new REALPRM();
public REALPRM rdata23=new REALPRM();
public REALPRM rdata24=new REALPRM();
} /* In case that the number of alarm is 24 */
#elif FS15D
[StructLayout(LayoutKind.Sequential,Pack=4)]
public class REALPRMS
{
public REALPRM rdata1=new REALPRM();
public REALPRM rdata2=new REALPRM();
public REALPRM rdata3=new REALPRM();
public REALPRM rdata4=new REALPRM();
public REALPRM rdata5=new REALPRM();
public REALPRM rdata6=new REALPRM();
public REALPRM rdata7=new REALPRM();
public REALPRM rdata8=new REALPRM();
public REALPRM rdata9=new REALPRM();
public REALPRM rdata10=new REALPRM();
} /* In case that the number of alarm is 10 */
#else
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REALPRMS
{
public REALPRM rdata1 = new REALPRM();
public REALPRM rdata2 = new REALPRM();
public REALPRM rdata3 = new REALPRM();
public REALPRM rdata4 = new REALPRM();
public REALPRM rdata5 = new REALPRM();
public REALPRM rdata6 = new REALPRM();
public REALPRM rdata7 = new REALPRM();
public REALPRM rdata8 = new REALPRM();
} /* In case that the number of alarm is 8 */
#endif
[StructLayout(LayoutKind.Explicit)]
public class IODBPSD_1
{
[FieldOffset(0)]
public short datano; /* data number */
[FieldOffset(2)]
public short type; /* axis number */
[FieldOffset(4)]
public byte cdata; /* parameter / setting data */
[FieldOffset(4)]
public short idata;
[FieldOffset(4)]
public int ldata;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBPSD_2
{
public short datano; /* data number */
public short type; /* axis number */
public REALPRM rdata = new REALPRM();
}
[StructLayout(LayoutKind.Explicit)]
public class IODBPSD_3
{
[FieldOffset(0)]
public short datano; /* data number */
[FieldOffset(2)]
public short type; /* axis number */
[FieldOffset(4),
MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public byte[] cdatas = new byte[MAX_AXIS];
[FieldOffset(4),
MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public short[] idatas = new short[MAX_AXIS];
[FieldOffset(4),
MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] ldatas = new int[MAX_AXIS];
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBPSD_4
{
public short datano; /* data number */
public short type; /* axis number */
public REALPRMS rdatas = new REALPRMS();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBPSD_A
{
public IODBPSD_1 data1 = new IODBPSD_1();
public IODBPSD_1 data2 = new IODBPSD_1();
public IODBPSD_1 data3 = new IODBPSD_1();
public IODBPSD_1 data4 = new IODBPSD_1();
public IODBPSD_1 data5 = new IODBPSD_1();
public IODBPSD_1 data6 = new IODBPSD_1();
public IODBPSD_1 data7 = new IODBPSD_1();
} /* (sample) must be modified */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBPSD_B
{
public IODBPSD_2 data1 = new IODBPSD_2();
public IODBPSD_2 data2 = new IODBPSD_2();
public IODBPSD_2 data3 = new IODBPSD_2();
public IODBPSD_2 data4 = new IODBPSD_2();
public IODBPSD_2 data5 = new IODBPSD_2();
public IODBPSD_2 data6 = new IODBPSD_2();
public IODBPSD_2 data7 = new IODBPSD_2();
} /* (sample) must be modified */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBPSD_C
{
public IODBPSD_3 data1 = new IODBPSD_3();
public IODBPSD_3 data2 = new IODBPSD_3();
public IODBPSD_3 data3 = new IODBPSD_3();
public IODBPSD_3 data4 = new IODBPSD_3();
public IODBPSD_3 data5 = new IODBPSD_3();
public IODBPSD_3 data6 = new IODBPSD_3();
public IODBPSD_3 data7 = new IODBPSD_3();
} /* (sample) must be modified */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBPSD_D
{
public IODBPSD_4 data1 = new IODBPSD_4();
public IODBPSD_4 data2 = new IODBPSD_4();
public IODBPSD_4 data3 = new IODBPSD_4();
public IODBPSD_4 data4 = new IODBPSD_4();
public IODBPSD_4 data5 = new IODBPSD_4();
public IODBPSD_4 data6 = new IODBPSD_4();
public IODBPSD_4 data7 = new IODBPSD_4();
} /* (sample) must be modified */
/* cnc_rdparam_ext:read parameters */
/* cnc_rddiag_ext:read diagnosis data */
/* cnc_start_async_wrparam:async parameter write start */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBPRMNO
{
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 10)]
public int[] prm = new int[10];
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBPRM_data
{
public int prm_val; /* parameter / setting data */
public int dec_val;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBPRM1
{
public IODBPRM_data data1 = new IODBPRM_data();
public IODBPRM_data data2 = new IODBPRM_data();
public IODBPRM_data data3 = new IODBPRM_data();
public IODBPRM_data data4 = new IODBPRM_data();
public IODBPRM_data data5 = new IODBPRM_data();
public IODBPRM_data data6 = new IODBPRM_data();
public IODBPRM_data data7 = new IODBPRM_data();
public IODBPRM_data data8 = new IODBPRM_data();
public IODBPRM_data data9 = new IODBPRM_data();
public IODBPRM_data data10 = new IODBPRM_data();
public IODBPRM_data data11 = new IODBPRM_data();
public IODBPRM_data data12 = new IODBPRM_data();
public IODBPRM_data data13 = new IODBPRM_data();
public IODBPRM_data data14 = new IODBPRM_data();
public IODBPRM_data data15 = new IODBPRM_data();
public IODBPRM_data data16 = new IODBPRM_data();
public IODBPRM_data data17 = new IODBPRM_data();
public IODBPRM_data data18 = new IODBPRM_data();
public IODBPRM_data data19 = new IODBPRM_data();
public IODBPRM_data data20 = new IODBPRM_data();
public IODBPRM_data data21 = new IODBPRM_data();
public IODBPRM_data data22 = new IODBPRM_data();
public IODBPRM_data data23 = new IODBPRM_data();
public IODBPRM_data data24 = new IODBPRM_data();
public IODBPRM_data data25 = new IODBPRM_data();
public IODBPRM_data data26 = new IODBPRM_data();
public IODBPRM_data data27 = new IODBPRM_data();
public IODBPRM_data data28 = new IODBPRM_data();
public IODBPRM_data data29 = new IODBPRM_data();
public IODBPRM_data data30 = new IODBPRM_data();
public IODBPRM_data data31 = new IODBPRM_data();
public IODBPRM_data data32 = new IODBPRM_data();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBPRM2
{
public int datano; /* data number */
public short type; /* data type */
public short axis; /* axis information */
public short info; /* misc information */
public short unit; /* unit information */
public IODBPRM1 data = new IODBPRM1();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBPRM
{
public IODBPRM2 prm1 = new IODBPRM2();
public IODBPRM2 prm2 = new IODBPRM2();
public IODBPRM2 prm3 = new IODBPRM2();
public IODBPRM2 prm4 = new IODBPRM2();
public IODBPRM2 prm5 = new IODBPRM2();
public IODBPRM2 prm6 = new IODBPRM2();
public IODBPRM2 prm7 = new IODBPRM2();
public IODBPRM2 prm8 = new IODBPRM2();
public IODBPRM2 prm9 = new IODBPRM2();
public IODBPRM2 prm10 = new IODBPRM2();
} /* In case that the number of alarm is 10 */
/* cnc_rdpitchr:read pitch error compensation data(area specified) */
/* cnc_wrpitchr:write pitch error compensation data(area specified) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBPI
{
public short datano_s; /* start pitch number */
public short dummy; /* dummy */
public short datano_e; /* end pitch number */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 5)]
public sbyte[] data = new sbyte[5]; /* offset value */
} /* In case that the number of data is 5 */
/* cnc_rdmacro:read custom macro variable */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBM
{
public short datano; /* variable number */
public short dummy; /* dummy */
public int mcr_val; /* macro variable */
public short dec_val; /* decimal point */
}
/* cnc_rdmacror:read custom macro variables(area specified) */
/* cnc_wrmacror:write custom macro variables(area specified) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBMR_data
{
public int mcr_val; /* macro variable */
public short dec_val; /* decimal point */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBMR1
{
public IODBMR_data data1 = new IODBMR_data();
public IODBMR_data data2 = new IODBMR_data();
public IODBMR_data data3 = new IODBMR_data();
public IODBMR_data data4 = new IODBMR_data();
public IODBMR_data data5 = new IODBMR_data();
} /* In case that the number of data is 5 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBMR
{
public short datano_s; /* start macro number */
public short dummy; /* dummy */
public short datano_e; /* end macro number */
public IODBMR1 data = new IODBMR1();
}
/* cnc_rdpmacro:read P code macro variable */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBPM
{
public int datano; /* variable number */
public short dummy; /* dummy */
public int mcr_val; /* macro variable */
public short dec_val; /* decimal point */
}
/* cnc_rdpmacror:read P code macro variables(area specified) */
/* cnc_wrpmacror:write P code macro variables(area specified) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBPR_data
{
public int mcr_val; /* macro variable */
public short dec_val; /* decimal point */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBPR1
{
public IODBPR_data data1 = new IODBPR_data();
public IODBPR_data data2 = new IODBPR_data();
public IODBPR_data data3 = new IODBPR_data();
public IODBPR_data data4 = new IODBPR_data();
public IODBPR_data data5 = new IODBPR_data();
} /* In case that the number of data is 5 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBPR
{
public int datano_s; /* start macro number */
public short dummy; /* dummy */
public int datano_e; /* end macro number */
public IODBPR1 data = new IODBPR1();
}
/* cnc_rdtofsinfo:read tool offset information */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBTLINF
{
public short ofs_type;
public short use_no;
}
/* cnc_rdtofsinfo2:read tool offset information(2) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBTLINF2
{
public short ofs_type;
public short use_no;
public short ofs_enable;
}
/* cnc_rdmacroinfo:read custom macro variable information */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBMVINF
{
public short use_no1;
public short use_no2;
}
/* cnc_rdpmacroinfo:read P code macro variable information */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBPMINF
{
public short use_no1;
#if PCD_UWORD
public ushort use_no2;
#else
public short use_no2;
#endif
public short v2_type;
}
/* cnc_tofs_rnge:read validity of tool offset */
/* cnc_zofs_rnge:read validity of work zero offset */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBDATRNG
{
public int data_min; /* lower limit */
public int data_max; /* upper limit */
public int status; /* status of setting */
}
/* cnc_rdhsprminfo:read the information for function cnc_rdhsparam() */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class HSPINFO_data
{
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 16)]
public byte[] data1 = new byte[16];
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 16)]
public byte[] data2 = new byte[16];
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 16)]
public byte[] data3 = new byte[16];
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 16)]
public byte[] data4 = new byte[16];
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 16)]
public byte[] data5 = new byte[16];
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 16)]
public byte[] data6 = new byte[16];
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 16)]
public byte[] data7 = new byte[16];
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 16)]
public byte[] data8 = new byte[16];
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class HSPINFO
{
public HSPINFO_data prminfo1 = new HSPINFO_data();
public HSPINFO_data prminfo2 = new HSPINFO_data();
public HSPINFO_data prminfo3 = new HSPINFO_data();
public HSPINFO_data prminfo4 = new HSPINFO_data();
public HSPINFO_data prminfo5 = new HSPINFO_data();
public HSPINFO_data prminfo6 = new HSPINFO_data();
public HSPINFO_data prminfo7 = new HSPINFO_data();
public HSPINFO_data prminfo8 = new HSPINFO_data();
public HSPINFO_data prminfo9 = new HSPINFO_data();
public HSPINFO_data prminfo10 = new HSPINFO_data();
}
/* cnc_rdhsparam:read parameters at the high speed */
[StructLayout(LayoutKind.Explicit)]
public class HSPDATA_1
{
[FieldOffset(0),
MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public byte[] cdatas1 = new byte[MAX_AXIS];
[FieldOffset(4 * MAX_AXIS),
MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public byte[] cdatas2 = new byte[MAX_AXIS];
[FieldOffset(4 * 2 * MAX_AXIS),
MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public byte[] cdatas3 = new byte[MAX_AXIS];
[FieldOffset(4 * 3 * MAX_AXIS),
MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public byte[] cdatas4 = new byte[MAX_AXIS];
[FieldOffset(4 * 4 * MAX_AXIS),
MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public byte[] cdatas5 = new byte[MAX_AXIS];
[FieldOffset(4 * 5 * MAX_AXIS),
MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public byte[] cdatas6 = new byte[MAX_AXIS];
[FieldOffset(4 * 6 * MAX_AXIS),
MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public byte[] cdatas7 = new byte[MAX_AXIS];
[FieldOffset(4 * 7 * MAX_AXIS),
MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public byte[] cdatas8 = new byte[MAX_AXIS];
[FieldOffset(4 * 8 * MAX_AXIS),
MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public byte[] cdatas9 = new byte[MAX_AXIS];
[FieldOffset(4 * 9 * MAX_AXIS),
MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public byte[] cdatas10 = new byte[MAX_AXIS];
}
[StructLayout(LayoutKind.Explicit)]
public class HSPDATA_2
{
[FieldOffset(0),
MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public short[] idatas1 = new short[MAX_AXIS];
[FieldOffset(2 * MAX_AXIS),
MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public short[] idatas2 = new short[MAX_AXIS];
[FieldOffset(2 * 2 * MAX_AXIS),
MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public short[] idatas3 = new short[MAX_AXIS];
[FieldOffset(2 * 3 * MAX_AXIS),
MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public short[] idatas4 = new short[MAX_AXIS];
[FieldOffset(2 * 4 * MAX_AXIS),
MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public short[] idatas5 = new short[MAX_AXIS];
[FieldOffset(2 * 5 * MAX_AXIS),
MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public short[] idatas6 = new short[MAX_AXIS];
[FieldOffset(2 * 6 * MAX_AXIS),
MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public short[] idatas7 = new short[MAX_AXIS];
[FieldOffset(2 * 7 * MAX_AXIS),
MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public short[] idatas8 = new short[MAX_AXIS];
[FieldOffset(2 * 8 * MAX_AXIS),
MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public short[] idatas9 = new short[MAX_AXIS];
[FieldOffset(2 * 9 * MAX_AXIS),
MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public short[] idatas10 = new short[MAX_AXIS];
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class HSPDATA_3
{
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] ldatas1 = new int[MAX_AXIS];
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] ldatas2 = new int[MAX_AXIS];
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] ldatas3 = new int[MAX_AXIS];
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] ldatas4 = new int[MAX_AXIS];
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] ldatas5 = new int[MAX_AXIS];
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] ldatas6 = new int[MAX_AXIS];
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] ldatas7 = new int[MAX_AXIS];
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] ldatas8 = new int[MAX_AXIS];
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] ldatas9 = new int[MAX_AXIS];
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] ldatas10 = new int[MAX_AXIS];
}
/*----------------------------------------*/
/* CNC: Tool life management data related */
/*----------------------------------------*/
/* cnc_rdgrpid:read tool life management data(tool group number) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBTLIFE1
{
public short dummy; /* dummy */
public short type; /* data type */
public int data; /* data */
}
/* cnc_rdngrp:read tool life management data(number of tool groups) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBTLIFE2
{
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2)]
public short[] dummy; /* dummy */
public int data; /* data */
}
/* cnc_rdntool:read tool life management data(number of tools) */
/* cnc_rdlife:read tool life management data(tool life) */
/* cnc_rdcount:read tool life management data(tool lift counter) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBTLIFE3
{
public short datano; /* data number */
public short dummy; /* dummy */
public int data; /* data */
}
/* cnc_rd1length:read tool life management data(tool length number-1) */
/* cnc_rd2length:read tool life management data(tool length number-2) */
/* cnc_rd1radius:read tool life management data(cutter compensation no.-1) */
/* cnc_rd2radius:read tool life management data(cutter compensation no.-2) */
/* cnc_t1info:read tool life management data(tool information-1) */
/* cnc_t2info:read tool life management data(tool information-2) */
/* cnc_toolnum:read tool life management data(tool number) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBTLIFE4
{
public short datano; /* data number */
public short type; /* data type */
public int data; /* data */
}
/* cnc_rdgrpid2:read tool life management data(tool group number) 2 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBTLIFE5
{
public int dummy; /* dummy */
public int type; /* data type */
public int data; /* data */
}
/* cnc_rdtoolrng:read tool life management data(tool number, tool life, tool life counter)(area specified) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTR_data
{
public int ntool; /* tool number */
public int life; /* tool life */
public int count; /* tool life counter */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTR1
{
public IODBTR_data data1 = new IODBTR_data();
public IODBTR_data data2 = new IODBTR_data();
public IODBTR_data data3 = new IODBTR_data();
public IODBTR_data data4 = new IODBTR_data();
public IODBTR_data data5 = new IODBTR_data();
} /* In case that the number of data is 5 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTR
{
public short datano_s; /* start group number */
public short dummy; /* dummy */
public short datano_e; /* end group number */
public IODBTR1 data = new IODBTR1();
}
/* cnc_rdtoolgrp:read tool life management data(all data within group) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBTG_data
{
public int tuse_num; /* tool number */
public int tool_num; /* tool life */
public int length_num; /* tool life counter */
public int radius_num; /* tool life counter */
public int tinfo; /* tool life counter */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBTG1
{
public ODBTG_data data1 = new ODBTG_data();
public ODBTG_data data2 = new ODBTG_data();
public ODBTG_data data3 = new ODBTG_data();
public ODBTG_data data4 = new ODBTG_data();
public ODBTG_data data5 = new ODBTG_data();
} /* In case that the number of data is 5 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBTG
{
public short grp_num; /* start group number */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2)]
public short[] dummy; /* dummy */
public int ntool; /* tool number */
public int life; /* tool life */
public int count; /* tool life counter */
public ODBTG1 data = new ODBTG1();
}
/* cnc_wrcountr:write tool life management data(tool life counter) (area specified) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IDBWRC_data
{
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2)]
public int[] dummy; /* dummy */
public int count; /* tool life counter */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IDBWRC1
{
public IDBWRC_data data1 = new IDBWRC_data();
public IDBWRC_data data2 = new IDBWRC_data();
public IDBWRC_data data3 = new IDBWRC_data();
public IDBWRC_data data4 = new IDBWRC_data();
public IDBWRC_data data5 = new IDBWRC_data();
} /* In case that the number of data is 5 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IDBWRC
{
public short datano_s; /* start group number */
public short dummy; /* dummy */
public short datano_e; /* end group number */
public IDBWRC1 data = new IDBWRC1();
}
/* cnc_rdusegrpid:read tool life management data(used tool group number) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBUSEGR
{
public short datano; /* dummy */
public short type; /* dummy */
public int next; /* next use group number */
public int use; /* using group number */
public int slct; /* selecting group number */
}
/* cnc_rdmaxgrp:read tool life management data(max. number of tool groups) */
/* cnc_rdmaxtool:read tool life management data(maximum number of tool within group) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBLFNO
{
public short datano; /* dummy */
public short type; /* dummy */
public short data; /* number of data */
}
/* cnc_rdusetlno:read tool life management data(used tool no within group) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBTLUSE
{
public short s_grp; /* start group number */
public short dummy; /* dummy */
public short e_grp; /* end group number */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 5)]
public int[] data; /* tool using number */
} /* In case that the number of group is 5 */
/* cnc_rd1tlifedata:read tool life management data(tool data1) */
/* cnc_rd2tlifedata:read tool life management data(tool data2) */
/* cnc_wr1tlifedata:write tool life management data(tool data1) */
/* cnc_wr2tlifedata:write tool life management data(tool data2) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTD
{
public short datano; /* tool group number */
public short type; /* tool using number */
public int tool_num; /* tool number */
public int h_code; /* H code */
public int d_code; /* D code */
public int tool_inf; /* tool information */
}
/* cnc_rd1tlifedat2:read tool life management data(tool data1) 2 */
/* cnc_wr1tlifedat2:write tool life management data(tool data1) 2 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTD2
{
public short datano; /* tool group number */
public short dummy; /* dummy */
public int type; /* tool using number */
public int tool_num; /* tool number */
public int h_code; /* H code */
public int d_code; /* D code */
public int tool_inf; /* tool information */
}
/* cnc_rdgrpinfo:read tool life management data(tool group information) */
/* cnc_wrgrpinfo:write tool life management data(tool group information) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTGI_data
{
public int n_tool; /* number of tool */
public int count_value; /* tool life */
public int counter; /* tool life counter */
public int count_type; /* tool life counter type */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTGI1
{
public IODBTGI_data data1 = new IODBTGI_data();
public IODBTGI_data data2 = new IODBTGI_data();
public IODBTGI_data data3 = new IODBTGI_data();
public IODBTGI_data data4 = new IODBTGI_data();
public IODBTGI_data data5 = new IODBTGI_data();
} /* In case that the number of data is 5 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTGI
{
public short s_grp; /* start group number */
public short dummy; /* dummy */
public short e_grp; /* end group number */
public IODBTGI1 data = new IODBTGI1();
}
/* cnc_rdgrpinfo2:read tool life management data(tool group information 2) */
/* cnc_wrgrpinfo2:write tool life management data(tool group information 2) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTGI2
{
public short s_grp; /* start group number */
public short dummy; /* dummy */
public short e_grp; /* end group number */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 5)]
public int[] opt_grpno = new int[5]; /* optional group number of tool */
} /* In case that the number of group is 5 */
/* cnc_rdgrpinfo3:read tool life management data(tool group information 3) */
/* cnc_wrgrpinfo3:write tool life management data(tool group information 3) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTGI3
{
public short s_grp; /* start group number */
public short dummy; /* dummy */
public short e_grp; /* end group number */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 5)]
public int[] life_rest = new int[5]; /* tool life rest count */
} /* In case that the number of group is 5 */
/* cnc_rdgrpinfo4:read tool life management data(tool group information 4) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTGI4
{
public short grp_no;
public int n_tool;
public int count_value;
public int counter;
public int count_type;
public int opt_grpno;
public int life_rest;
}
/* cnc_instlifedt:insert tool life management data(tool data) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IDBITD
{
public short datano; /* tool group number */
public short type; /* tool using number */
public int data; /* tool number */
}
/* cnc_rdtlinfo:read tool life management data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBTLINFO
{
public int max_group; /* maximum number of tool groups */
public int max_tool; /* maximum number of tool within group */
public int max_minute; /* maximum number of life count (minutes) */
public int max_cycle; /* maximum number of life count (cycles) */
}
/* cnc_rdtlusegrp:read tool life management data(used tool group number) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBUSEGRP
{
public int next; /* next use group number */
public int use; /* using group number */
public int slct; /* selecting group number */
public int opt_next; /* next use optional group number */
public int opt_use; /* using optional group number */
public int opt_slct; /* selecting optional group number */
}
/* cnc_rdtlgrp:read tool life management data(tool group information 2) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTLGRP_data
{
public int ntool; /* number of all tool */
public int nfree; /* number of free tool */
public int life; /* tool life */
public int count; /* tool life counter */
public int use_tool; /* using tool number */
public int opt_grpno; /* optional group number */
public int life_rest; /* tool life rest count */
public short rest_sig; /* tool life rest signal */
public short count_type; /* tool life counter type */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTLGRP
{
public IODBTLGRP_data data1 = new IODBTLGRP_data();
public IODBTLGRP_data data2 = new IODBTLGRP_data();
public IODBTLGRP_data data3 = new IODBTLGRP_data();
public IODBTLGRP_data data4 = new IODBTLGRP_data();
public IODBTLGRP_data data5 = new IODBTLGRP_data();
} /* In case that the number of group is 5 */
/* cnc_rdtltool:read tool life management data (tool data1) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTLTOOL_data
{
public int tool_num; /* tool number */
public int h_code; /* H code */
public int d_code; /* D code */
public int tool_inf; /* tool information */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTLTOOL
{
public IODBTLTOOL_data data1 = new IODBTLTOOL_data();
public IODBTLTOOL_data data2 = new IODBTLTOOL_data();
public IODBTLTOOL_data data3 = new IODBTLTOOL_data();
public IODBTLTOOL_data data4 = new IODBTLTOOL_data();
public IODBTLTOOL_data data5 = new IODBTLTOOL_data();
} /* In case that the number of group is 5 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBEXGP_data
{
public int grp_no; /* group number */
public int opt_grpno; /* optional group number */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBEXGP
{
public ODBEXGP_data data1 = new ODBEXGP_data();
public ODBEXGP_data data2 = new ODBEXGP_data();
public ODBEXGP_data data3 = new ODBEXGP_data();
public ODBEXGP_data data4 = new ODBEXGP_data();
public ODBEXGP_data data5 = new ODBEXGP_data();
public ODBEXGP_data data6 = new ODBEXGP_data();
public ODBEXGP_data data7 = new ODBEXGP_data();
public ODBEXGP_data data8 = new ODBEXGP_data();
public ODBEXGP_data data9 = new ODBEXGP_data();
public ODBEXGP_data data10 = new ODBEXGP_data();
public ODBEXGP_data data11 = new ODBEXGP_data();
public ODBEXGP_data data12 = new ODBEXGP_data();
public ODBEXGP_data data13 = new ODBEXGP_data();
public ODBEXGP_data data14 = new ODBEXGP_data();
public ODBEXGP_data data15 = new ODBEXGP_data();
public ODBEXGP_data data16 = new ODBEXGP_data();
public ODBEXGP_data data17 = new ODBEXGP_data();
public ODBEXGP_data data18 = new ODBEXGP_data();
public ODBEXGP_data data19 = new ODBEXGP_data();
public ODBEXGP_data data20 = new ODBEXGP_data();
public ODBEXGP_data data21 = new ODBEXGP_data();
public ODBEXGP_data data22 = new ODBEXGP_data();
public ODBEXGP_data data23 = new ODBEXGP_data();
public ODBEXGP_data data24 = new ODBEXGP_data();
public ODBEXGP_data data25 = new ODBEXGP_data();
public ODBEXGP_data data26 = new ODBEXGP_data();
public ODBEXGP_data data27 = new ODBEXGP_data();
public ODBEXGP_data data28 = new ODBEXGP_data();
public ODBEXGP_data data29 = new ODBEXGP_data();
public ODBEXGP_data data30 = new ODBEXGP_data();
public ODBEXGP_data data31 = new ODBEXGP_data();
public ODBEXGP_data data32 = new ODBEXGP_data();
}
/*-----------------------------------*/
/* CNC: Tool management data related */
/*-----------------------------------*/
/* cnc_regtool:new registration of tool management data */
/* cnc_rdtool:lead of tool management data */
/* cnc_wrtool:write of tool management data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTLMNG_data
{
public int T_code;
public int life_count;
public int max_life;
public int rest_life;
public byte life_stat;
public byte cust_bits;
public ushort tool_info;
public short H_code;
public short D_code;
public int spindle_speed;
public int feedrate;
public short magazine;
public short pot;
public short gno;
public short m_ofs;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 4)]
public int[] reserved = new int[4];
public int custom1;
public int custom2;
public int custom3;
public int custom4;
public int custom5;
public int custom6;
public int custom7;
public int custom8;
public int custom9;
public int custom10;
public int custom11;
public int custom12;
public int custom13;
public int custom14;
public int custom15;
public int custom16;
public int custom17;
public int custom18;
public int custom19;
public int custom20;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTLMNG
{
public IODBTLMNG_data data1 = new IODBTLMNG_data();
public IODBTLMNG_data data2 = new IODBTLMNG_data();
public IODBTLMNG_data data3 = new IODBTLMNG_data();
public IODBTLMNG_data data4 = new IODBTLMNG_data();
public IODBTLMNG_data data5 = new IODBTLMNG_data();
} /* In case that the number of group is 5 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTLMNG_F2_data
{
public int T_code;
public int life_count;
public int max_life;
public int rest_life;
public byte life_stat;
public byte cust_bits;
public ushort tool_info;
public short H_code;
public short D_code;
public int spindle_speed;
public int feedrate;
public short magazine;
public short pot;
public short G_code;
public short W_code;
public short gno;
public short m_ofs;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 3)]
public int[] reserved;
public int custom1;
public int custom2;
public int custom3;
public int custom4;
public int custom5;
public int custom6;
public int custom7;
public int custom8;
public int custom9;
public int custom10;
public int custom11;
public int custom12;
public int custom13;
public int custom14;
public int custom15;
public int custom16;
public int custom17;
public int custom18;
public int custom19;
public int custom20;
public int custom21;
public int custom22;
public int custom23;
public int custom24;
public int custom25;
public int custom26;
public int custom27;
public int custom28;
public int custom29;
public int custom30;
public int custom31;
public int custom32;
public int custom33;
public int custom34;
public int custom35;
public int custom36;
public int custom37;
public int custom38;
public int custom39;
public int custom40;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTLMNG_F2
{
public IODBTLMNG_F2_data data1 = new IODBTLMNG_F2_data();
public IODBTLMNG_F2_data data2 = new IODBTLMNG_F2_data();
public IODBTLMNG_F2_data data3 = new IODBTLMNG_F2_data();
public IODBTLMNG_F2_data data4 = new IODBTLMNG_F2_data();
public IODBTLMNG_F2_data data5 = new IODBTLMNG_F2_data();
} /* In case that the number of group is 5 */
/* cnc_wrtool2:write of individual data of tool management data */
[StructLayout(LayoutKind.Explicit)]
public class IDBTLM_item
{
[FieldOffset(0)]
public sbyte data1;
[FieldOffset(0)]
public short data2;
[FieldOffset(0)]
public int data4;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IDBTLM
{
public short data_id;
public IDBTLM_item item = new IDBTLM_item();
}
/* cnc_regmagazine:new registration of magazine management data */
/* cnc_rdmagazine:lead of magazine management data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTLMAG_data
{
public short magazine;
public short pot;
public short tool_index;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTLMAG
{
public IODBTLMAG_data data1 = new IODBTLMAG_data();
public IODBTLMAG_data data2 = new IODBTLMAG_data();
public IODBTLMAG_data data3 = new IODBTLMAG_data();
public IODBTLMAG_data data4 = new IODBTLMAG_data();
public IODBTLMAG_data data5 = new IODBTLMAG_data();
} /* In case that the number of group is 5 */
/* cnc_delmagazine:deletion of magazine management data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTLMAG2_data
{
public short magazine;
public short pot;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTLMAG2
{
public IODBTLMAG2_data data1 = new IODBTLMAG2_data();
public IODBTLMAG2_data data2 = new IODBTLMAG2_data();
public IODBTLMAG2_data data3 = new IODBTLMAG2_data();
public IODBTLMAG2_data data4 = new IODBTLMAG2_data();
public IODBTLMAG2_data data5 = new IODBTLMAG2_data();
} /* In case that the number of group is 5 */
/*-------------------------------------*/
/* CNC: Operation history data related */
/*-------------------------------------*/
/* cnc_rdophistry:read operation history data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_ALM
{
public short rec_type; /* record type */
public short alm_grp; /* alarm group */
public short alm_no; /* alarm number */
public sbyte axis_no; /* axis number */
public sbyte dummy;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_MDI
{
public short rec_type; /* record type */
public byte key_code; /* key code */
public byte pw_flag; /* power on flag */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 4)]
public sbyte[] dummy;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_SGN
{
public short rec_type; /* record type */
public sbyte sig_name; /* signal name */
public byte sig_old; /* old signal bit pattern */
public byte sig_new; /* new signal bit pattern */
public sbyte dummy;
public short sig_no; /* signal number */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_DATE
{
public short rec_type; /* record type */
public sbyte year; /* year */
public sbyte month; /* month */
public sbyte day; /* day */
public sbyte pw_flag; /* power on flag */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2)]
public sbyte[] dummy;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_TIME
{
public short rec_type; /* record flag */
public sbyte hour; /* hour */
public sbyte minute; /* minute */
public sbyte second; /* second */
public sbyte pw_flag; /* power on flag */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2)]
public sbyte[] dummy;
}
[StructLayout(LayoutKind.Explicit, Size = 8)]
public class ODBHIS_data
{
// record type
[FieldOffset(0)]
public short rec_type; /* record type */
// alarm record
[FieldOffset(0)]
public short alm_rec_type; /* record type */
[FieldOffset(2)]
public short alm_alm_grp; /* alarm group */
[FieldOffset(4)]
public short alm_alm_no; /* alarm number */
[FieldOffset(6)]
public sbyte alm_axis_no; /* axis number */
[FieldOffset(7)]
public sbyte alm_dummy;
// mdi record
[FieldOffset(0)]
public short mdi_rec_type; /* record type */
[FieldOffset(2)]
public byte mdi_key_code; /* key code */
[FieldOffset(3)]
public byte mdi_pw_flag; /* power on flag */
[FieldOffset(4)]
public sbyte mdi_dummy1;
[FieldOffset(5)]
public sbyte mdi_dummy2;
[FieldOffset(6)]
public sbyte mdi_dummy3;
[FieldOffset(7)]
public sbyte mdi_dummy4;
// sign record
[FieldOffset(0)]
public short sgn_rec_type; /* record type */
[FieldOffset(2)]
public sbyte sgn_sig_name; /* signal name */
[FieldOffset(3)]
public byte sgn_sig_old; /* old signal bit pattern */
[FieldOffset(4)]
public byte sgn_sig_new; /* new signal bit pattern */
[FieldOffset(5)]
public sbyte sgn_dummy;
[FieldOffset(6)]
public short sgn_sig_no; /* signal number */
// date record
[FieldOffset(0)]
public short date_rec_type; /* record type */
[FieldOffset(2)]
public sbyte date_year; /* year */
[FieldOffset(3)]
public sbyte date_month; /* month */
[FieldOffset(4)]
public sbyte date_day; /* day */
[FieldOffset(5)]
public sbyte date_pw_flag; /* power on flag */
[FieldOffset(6)]
public sbyte date_dummy1;
[FieldOffset(7)]
public sbyte date_dummy2;
// time record
[FieldOffset(0)]
public short time_rec_type; /* record flag */
[FieldOffset(2)]
public sbyte time_hour; /* hour */
[FieldOffset(3)]
public sbyte time_minute; /* minute */
[FieldOffset(4)]
public sbyte time_second; /* second */
[FieldOffset(5)]
public sbyte time_pw_flag; /* power on flag */
[FieldOffset(6)]
public sbyte time_dummy1;
[FieldOffset(7)]
public sbyte time_dummy2;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBHIS1
{
public ODBHIS_data data1 = new ODBHIS_data();
public ODBHIS_data data2 = new ODBHIS_data();
public ODBHIS_data data3 = new ODBHIS_data();
public ODBHIS_data data4 = new ODBHIS_data();
public ODBHIS_data data5 = new ODBHIS_data();
public ODBHIS_data data6 = new ODBHIS_data();
public ODBHIS_data data7 = new ODBHIS_data();
public ODBHIS_data data8 = new ODBHIS_data();
public ODBHIS_data data9 = new ODBHIS_data();
public ODBHIS_data data10 = new ODBHIS_data();
} /* In case that the number of data is 10 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBHIS
{
public ushort s_no; /* start number */
public short type; /* dummy */
public ushort e_no; /* end number */
public ODBHIS1 data = new ODBHIS1();
}
/* cnc_rdophistry2:read operation history data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_MDI2
{
public byte key_code; /* key code */
public byte pw_flag; /* power on flag */
public short dummy;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_MDI2_data
{
public short rec_len; /* length */
public short rec_type; /* record type */
public REC_MDI2 data = new REC_MDI2();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_SGN2
{
public short sig_name; /* signal name */
public short sig_no; /* signal number */
public byte sig_old; /* old signal bit pattern */
public byte sig_new; /* new signal bit pattern */
public short dummy;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_SGN2_data
{
public short rec_len; /* length */
public short rec_type; /* record type */
public REC_SGN2 data = new REC_SGN2();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_ALM2
{
public short alm_grp; /* alarm group */
public short alm_no; /* alarm number */
public short axis_no; /* axis number */
public short year; /* year */
public short month; /* month */
public short day; /* day */
public short hour; /* hour */
public short minute; /* minute */
public short second; /* second */
public short dummy;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_ALM2_data
{
public short rec_len; /* length */
public short rec_type; /* record type */
public REC_ALM2 data = new REC_ALM2();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_DATE2
{
public short evnt_type; /* event type */
public short year; /* year */
public short month; /* month */
public short day; /* day */
public short hour; /* hour */
public short minute; /* minute */
public short second; /* second */
public short dummy;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_DATE2_data
{
public short rec_len; /* length */
public short rec_type; /* record type */
public REC_DATE2 data = new REC_DATE2();
}
[StructLayout(LayoutKind.Explicit)]
public class ODBOPHIS
{
[FieldOffset(0)]
public REC_MDI2_data rec_mdi = new REC_MDI2_data();
[FieldOffset(0)]
public REC_SGN2_data rec_sgn = new REC_SGN2_data();
[FieldOffset(0)]
public REC_ALM2_data rec_alm = new REC_ALM2_data();
[FieldOffset(0)]
public REC_DATE2_data rec_date = new REC_DATE2_data();
}
/* cnc_rdophistry4:read operation history data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_MDI4
{
public char key_code; /* key code */
public char pw_flag; /* power on flag */
public short pth_no; /* path index */
public short ex_flag; /* kxternal key flag */
public short hour; /* hour */
public short minute; /* minute */
public short second; /* second */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_MDI4_data
{
public short rec_len; /* length */
public short rec_type; /* record type */
public REC_MDI4 data = new REC_MDI4();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_SGN4
{
public short sig_name; /* signal name */
public short sig_no; /* signal number */
public char sig_old; /* old signal bit pattern */
public char sig_new; /* new signal bit pattern */
public short pmc_no; /* pmc index */
public short hour; /* hour */
public short minute; /* minute */
public short second; /* second */
public short dummy;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_SGN4_data
{
public short rec_len; /* length */
public short rec_type; /* record type */
public REC_SGN4 data = new REC_SGN4();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_ALM4
{
public short alm_grp; /* alarm group */
public short alm_no; /* alarm number */
public short axis_no; /* axis number */
public short year; /* year */
public short month; /* month */
public short day; /* day */
public short hour; /* hour */
public short minute; /* minute */
public short second; /* second */
public short pth_no; /* path index */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_ALM4_data
{
public short rec_len; /* length */
public short rec_type; /* record type */
public REC_ALM4 data = new REC_ALM4();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_DATE4
{
public short evnt_type; /* event type */
public short year; /* year */
public short month; /* month */
public short day; /* day */
public short hour; /* hour */
public short minute; /* minute */
public short second; /* second */
public short dummy;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_DATE4_data
{
public short rec_len; /* length */
public short rec_type; /* record type */
public REC_DATE4 data = new REC_DATE4();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_IAL4
{
public short alm_grp; /* alarm group */
public short alm_no; /* alarm number */
public short axis_no; /* axis number */
public short year; /* year */
public short month; /* month */
public short day; /* day */
public short hour; /* hour */
public short minute; /* minute */
public short second; /* second */
public short pth_no; /* path index */
public short sys_alm; /* sys alarm */
public short dsp_flg; /* message dsp flag */
public short axis_num; /* axis num */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 10)]
public int[] g_modal; /* G code Modal */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 10)]
public char[] g_dp; /* #7:1 Block */
/* #6乣#0 dp*/
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 10)]
public int[] a_modal; /* B,D,E,F,H,M,N,O,S,T code Modal */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 10)]
public char[] a_dp; /* #7:1 Block */
/* 6乣#0 dp*/
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 32)]
public int[] abs_pos; /* Abs pos */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 32)]
public char[] abs_dp; /* Abs dp */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 32)]
public int[] mcn_pos; /* Mcn pos */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 32)]
public char[] mcn_dp; /* Mcn dp */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_IAL4_data
{
public short rec_len; /* length */
public short rec_type; /* record type */
public REC_IAL4 data = new REC_IAL4();
}
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class REC_MAL4
{
public short alm_grp; /* alarm group */
public short alm_no; /* alarm number */
public short axis_no; /* axis number */
public short year; /* year */
public short month; /* month */
public short day; /* day */
public short hour; /* hour */
public short minute; /* minute */
public short second; /* second */
public short pth_no; /* path index */
public short sys_alm; /* sys alarm */
public short dsp_flg; /* message dsp flag */
public short axis_num; /* axis num */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 64)]
public string alm_msg = new string(' ', 64); /* alarm message */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 10)]
public int[] g_modal; /* G code Modal */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 10)]
public char[] g_dp; /* #7:1 Block */
/* #6乣#0 dp*/
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 10)]
public int[] a_modal; /* B,D,E,F,H,M,N,O,S,T code Modal */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 10)]
public char[] a_dp; /* #7:1 Block */
/* 6乣#0 dp*/
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 32)]
public int[] abs_pos; /* Abs pos */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 32)]
public char[] abs_dp; /* Abs dp */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 32)]
public int[] mcn_pos; /* Mcn pos */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 32)]
public char[] mcn_dp; /* Mcn dp */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_MAL4_data
{
public short rec_len; /* length */
public short rec_type; /* record type */
public REC_MAL4 data = new REC_MAL4();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_OPM4
{
public short dsp_flg; /* Dysplay flag(ON/OFF) */
public short om_no; /* message number */
public short year; /* year */
public short month; /* month */
public short day; /* day */
public short hour; /* Hour */
public short minute; /* Minute */
public short second; /* Second */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 256)]
public string ope_msg = new string(' ', 256); /* Messege */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_OPM4_data
{
public short rec_len; /* length */
public short rec_type; /* record type */
public REC_OPM4 data = new REC_OPM4();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_OFS4
{
public short ofs_grp; /* Tool offset group */
public short ofs_no; /* Tool offset number */
public short hour; /* hour */
public short minute; /* minute */
public short second; /* second */
public short pth_no; /* path index */
public int ofs_old; /* old data */
public int ofs_new; /* new data */
public short old_dp; /* old data decimal point */
public short new_dp; /* new data decimal point */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_OFS4_data
{
public short rec_len; /* length */
public short rec_type; /* record type */
public REC_OFS4 data = new REC_OFS4();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_PRM4
{
public short prm_grp; /* paramater group */
public short prm_num; /* paramater number */
public short hour; /* hour */
public short minute; /* minute */
public short second; /* second */
public short prm_len; /* paramater data length */
public int prm_no; /* paramater no */
public int prm_old; /* old data */
public int prm_new; /* new data */
public short old_dp; /* old data decimal point */
public short new_dp; /* new data decimal point */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_PRM4_data
{
public short rec_len; /* length */
public short rec_type; /* record type */
public REC_PRM4 data = new REC_PRM4();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_WOF4
{
public short ofs_grp; /* Work offset group */
public short ofs_no; /* Work offset number */
public short hour; /* hour */
public short minute; /* minute */
public short second; /* second */
public short pth_no; /* path index */
public short axis_no; /* path axis num $*/
public short dummy;
public int ofs_old; /* old data */
public int ofs_new; /* new data */
public short old_dp; /* old data decimal point */
public short new_dp; /* new data decimal point */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_WOF4_data
{
public short rec_len; /* length */
public short rec_type; /* record type */
public REC_WOF4 data = new REC_WOF4();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_MAC4
{
public short mac_no; /* macro val number */
public short hour; /* hour */
public short minute; /* minute */
public short second; /* second */
public short pth_no; /* path index */
public int mac_old; /* old data */
public int mac_new; /* new data */
public short old_dp; /* old data decimal point */
public short new_dp; /* old data decimal point */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REC_MAC4_data
{
public short rec_len; /* length */
public short rec_type; /* record type */
public REC_MAC4 data = new REC_MAC4();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBOPHIS4_1
{
public REC_MDI4_data rec_mdi1 = new REC_MDI4_data();
public REC_MDI4_data rec_mdi2 = new REC_MDI4_data();
public REC_MDI4_data rec_mdi3 = new REC_MDI4_data();
public REC_MDI4_data rec_mdi4 = new REC_MDI4_data();
public REC_MDI4_data rec_mdi5 = new REC_MDI4_data();
public REC_MDI4_data rec_mdi6 = new REC_MDI4_data();
public REC_MDI4_data rec_mdi7 = new REC_MDI4_data();
public REC_MDI4_data rec_mdi8 = new REC_MDI4_data();
public REC_MDI4_data rec_mdi9 = new REC_MDI4_data();
public REC_MDI4_data rec_mdi10 = new REC_MDI4_data();
} /* In case that the number of data is 10 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBOPHIS4_2
{
public REC_SGN4_data rec_sgn1 = new REC_SGN4_data();
public REC_SGN4_data rec_sgn2 = new REC_SGN4_data();
public REC_SGN4_data rec_sgn3 = new REC_SGN4_data();
public REC_SGN4_data rec_sgn4 = new REC_SGN4_data();
public REC_SGN4_data rec_sgn5 = new REC_SGN4_data();
public REC_SGN4_data rec_sgn6 = new REC_SGN4_data();
public REC_SGN4_data rec_sgn7 = new REC_SGN4_data();
public REC_SGN4_data rec_sgn8 = new REC_SGN4_data();
public REC_SGN4_data rec_sgn9 = new REC_SGN4_data();
public REC_SGN4_data rec_sgn10 = new REC_SGN4_data();
} /* In case that the number of data is 10 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBOPHIS4_3
{
public REC_ALM4_data rec_alm1 = new REC_ALM4_data();
public REC_ALM4_data rec_alm2 = new REC_ALM4_data();
public REC_ALM4_data rec_alm3 = new REC_ALM4_data();
public REC_ALM4_data rec_alm4 = new REC_ALM4_data();
public REC_ALM4_data rec_alm5 = new REC_ALM4_data();
public REC_ALM4_data rec_alm6 = new REC_ALM4_data();
public REC_ALM4_data rec_alm7 = new REC_ALM4_data();
public REC_ALM4_data rec_alm8 = new REC_ALM4_data();
public REC_ALM4_data rec_alm9 = new REC_ALM4_data();
public REC_ALM4_data rec_alm10 = new REC_ALM4_data();
} /* In case that the number of data is 10 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBOPHIS4_4
{
public REC_DATE4_data rec_date1 = new REC_DATE4_data();
public REC_DATE4_data rec_date2 = new REC_DATE4_data();
public REC_DATE4_data rec_date3 = new REC_DATE4_data();
public REC_DATE4_data rec_date4 = new REC_DATE4_data();
public REC_DATE4_data rec_date5 = new REC_DATE4_data();
public REC_DATE4_data rec_date6 = new REC_DATE4_data();
public REC_DATE4_data rec_date7 = new REC_DATE4_data();
public REC_DATE4_data rec_date8 = new REC_DATE4_data();
public REC_DATE4_data rec_date9 = new REC_DATE4_data();
public REC_DATE4_data rec_date10 = new REC_DATE4_data();
} /* In case that the number of data is 10 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBOPHIS4_5
{
public REC_IAL4_data rec_ial1 = new REC_IAL4_data();
public REC_IAL4_data rec_ial2 = new REC_IAL4_data();
public REC_IAL4_data rec_ial3 = new REC_IAL4_data();
public REC_IAL4_data rec_ial4 = new REC_IAL4_data();
public REC_IAL4_data rec_ial5 = new REC_IAL4_data();
public REC_IAL4_data rec_ial6 = new REC_IAL4_data();
public REC_IAL4_data rec_ial7 = new REC_IAL4_data();
public REC_IAL4_data rec_ial8 = new REC_IAL4_data();
public REC_IAL4_data rec_ial9 = new REC_IAL4_data();
public REC_IAL4_data rec_ial10 = new REC_IAL4_data();
} /* In case that the number of data is 10 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBOPHIS4_6
{
public REC_MAL4_data rec_mal1 = new REC_MAL4_data();
public REC_MAL4_data rec_mal2 = new REC_MAL4_data();
public REC_MAL4_data rec_mal3 = new REC_MAL4_data();
public REC_MAL4_data rec_mal4 = new REC_MAL4_data();
public REC_MAL4_data rec_mal5 = new REC_MAL4_data();
public REC_MAL4_data rec_mal6 = new REC_MAL4_data();
public REC_MAL4_data rec_mal7 = new REC_MAL4_data();
public REC_MAL4_data rec_mal8 = new REC_MAL4_data();
public REC_MAL4_data rec_mal9 = new REC_MAL4_data();
public REC_MAL4_data rec_mal10 = new REC_MAL4_data();
} /* In case that the number of data is 10 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBOPHIS4_7
{
public REC_OPM4_data rec_opm1 = new REC_OPM4_data();
public REC_OPM4_data rec_opm2 = new REC_OPM4_data();
public REC_OPM4_data rec_opm3 = new REC_OPM4_data();
public REC_OPM4_data rec_opm4 = new REC_OPM4_data();
public REC_OPM4_data rec_opm5 = new REC_OPM4_data();
public REC_OPM4_data rec_opm6 = new REC_OPM4_data();
public REC_OPM4_data rec_opm7 = new REC_OPM4_data();
public REC_OPM4_data rec_opm8 = new REC_OPM4_data();
public REC_OPM4_data rec_opm9 = new REC_OPM4_data();
public REC_OPM4_data rec_opm10 = new REC_OPM4_data();
} /* In case that the number of data is 10 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBOPHIS4_8
{
public REC_OFS4_data rec_ofs1 = new REC_OFS4_data();
public REC_OFS4_data rec_ofs2 = new REC_OFS4_data();
public REC_OFS4_data rec_ofs3 = new REC_OFS4_data();
public REC_OFS4_data rec_ofs4 = new REC_OFS4_data();
public REC_OFS4_data rec_ofs5 = new REC_OFS4_data();
public REC_OFS4_data rec_ofs6 = new REC_OFS4_data();
public REC_OFS4_data rec_ofs7 = new REC_OFS4_data();
public REC_OFS4_data rec_ofs8 = new REC_OFS4_data();
public REC_OFS4_data rec_ofs9 = new REC_OFS4_data();
public REC_OFS4_data rec_ofs10 = new REC_OFS4_data();
} /* In case that the number of data is 10 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBOPHIS4_9
{
public REC_PRM4_data rec_prm1 = new REC_PRM4_data();
public REC_PRM4_data rec_prm2 = new REC_PRM4_data();
public REC_PRM4_data rec_prm3 = new REC_PRM4_data();
public REC_PRM4_data rec_prm4 = new REC_PRM4_data();
public REC_PRM4_data rec_prm5 = new REC_PRM4_data();
public REC_PRM4_data rec_prm6 = new REC_PRM4_data();
public REC_PRM4_data rec_prm7 = new REC_PRM4_data();
public REC_PRM4_data rec_prm8 = new REC_PRM4_data();
public REC_PRM4_data rec_prm9 = new REC_PRM4_data();
public REC_PRM4_data rec_prm10 = new REC_PRM4_data();
} /* In case that the number of data is 10 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBOPHIS4_10
{
public REC_WOF4_data rec_wof1 = new REC_WOF4_data();
public REC_WOF4_data rec_wof2 = new REC_WOF4_data();
public REC_WOF4_data rec_wof3 = new REC_WOF4_data();
public REC_WOF4_data rec_wof4 = new REC_WOF4_data();
public REC_WOF4_data rec_wof5 = new REC_WOF4_data();
public REC_WOF4_data rec_wof6 = new REC_WOF4_data();
public REC_WOF4_data rec_wof7 = new REC_WOF4_data();
public REC_WOF4_data rec_wof8 = new REC_WOF4_data();
public REC_WOF4_data rec_wof9 = new REC_WOF4_data();
public REC_WOF4_data rec_wof10 = new REC_WOF4_data();
} /* In case that the number of data is 10 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBOPHIS4_11
{
public REC_MAC4_data rec_mac1 = new REC_MAC4_data();
public REC_MAC4_data rec_mac2 = new REC_MAC4_data();
public REC_MAC4_data rec_mac3 = new REC_MAC4_data();
public REC_MAC4_data rec_mac4 = new REC_MAC4_data();
public REC_MAC4_data rec_mac5 = new REC_MAC4_data();
public REC_MAC4_data rec_mac6 = new REC_MAC4_data();
public REC_MAC4_data rec_mac7 = new REC_MAC4_data();
public REC_MAC4_data rec_mac8 = new REC_MAC4_data();
public REC_MAC4_data rec_mac9 = new REC_MAC4_data();
public REC_MAC4_data rec_mac10 = new REC_MAC4_data();
} /* In case that the number of data is 10 */
/* cnc_rdalmhistry:read alarm history data */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ALM_HIS_data
{
public short dummy;
public short alm_grp; /* alarm group */
public short alm_no; /* alarm number */
public byte axis_no; /* axis number */
public byte year; /* year */
public byte month; /* month */
public byte day; /* day */
public byte hour; /* hour */
public byte minute; /* minute */
public byte second; /* second */
public byte dummy2;
public short len_msg; /* alarm message length */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 32)]
public string alm_msg = new string(' ', 32); /* alarm message */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ALM_HIS1
{
public ALM_HIS_data data1 = new ALM_HIS_data();
public ALM_HIS_data data2 = new ALM_HIS_data();
public ALM_HIS_data data3 = new ALM_HIS_data();
public ALM_HIS_data data4 = new ALM_HIS_data();
public ALM_HIS_data data5 = new ALM_HIS_data();
public ALM_HIS_data data6 = new ALM_HIS_data();
public ALM_HIS_data data7 = new ALM_HIS_data();
public ALM_HIS_data data8 = new ALM_HIS_data();
public ALM_HIS_data data9 = new ALM_HIS_data();
public ALM_HIS_data data10 = new ALM_HIS_data();
} /* In case that the number of data is 10 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBAHIS
{
public ushort s_no; /* start number */
public short type; /* dummy */
public ushort e_no; /* end number */
public ALM_HIS1 alm_his = new ALM_HIS1();
}
/* cnc_rdalmhistry2:read alarm history data */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ALM_HIS2_data
{
public short alm_grp; /* alarm group */
public short alm_no; /* alarm number */
public short axis_no; /* axis number */
public short year; /* year */
public short month; /* month */
public short day; /* day */
public short hour; /* hour */
public short minute; /* minute */
public short second; /* second */
public short len_msg; /* alarm message length */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 32)]
public string alm_msg = new string(' ', 32); /* alarm message */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ALM_HIS2
{
public ALM_HIS2_data data1 = new ALM_HIS2_data();
public ALM_HIS2_data data2 = new ALM_HIS2_data();
public ALM_HIS2_data data3 = new ALM_HIS2_data();
public ALM_HIS2_data data4 = new ALM_HIS2_data();
public ALM_HIS2_data data5 = new ALM_HIS2_data();
public ALM_HIS2_data data6 = new ALM_HIS2_data();
public ALM_HIS2_data data7 = new ALM_HIS2_data();
public ALM_HIS2_data data8 = new ALM_HIS2_data();
public ALM_HIS2_data data9 = new ALM_HIS2_data();
public ALM_HIS2_data data10 = new ALM_HIS2_data();
} /* In case that the number of data is 10 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBAHIS2
{
public ushort s_no; /* start number */
public ushort e_no; /* end number */
public ALM_HIS2 alm_his = new ALM_HIS2();
}
/* cnc_rdalmhistry3:read alarm history data */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ALM_HIS3_data
{
public short alm_grp; /* alarm group */
public short alm_no; /* alarm number */
public short axis_no; /* axis number */
public short year; /* year */
public short month; /* month */
public short day; /* day */
public short hour; /* hour */
public short minute; /* minute */
public short second; /* second */
public short len_msg; /* alarm message length */
public short pth_no; /* path index */
public short dummy;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 32)]
public string alm_msg = new string(' ', 32); /* alarm message */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ALM_HIS3
{
public ALM_HIS3_data data1 = new ALM_HIS3_data();
public ALM_HIS3_data data2 = new ALM_HIS3_data();
public ALM_HIS3_data data3 = new ALM_HIS3_data();
public ALM_HIS3_data data4 = new ALM_HIS3_data();
public ALM_HIS3_data data5 = new ALM_HIS3_data();
public ALM_HIS3_data data6 = new ALM_HIS3_data();
public ALM_HIS3_data data7 = new ALM_HIS3_data();
public ALM_HIS3_data data8 = new ALM_HIS3_data();
public ALM_HIS3_data data9 = new ALM_HIS3_data();
public ALM_HIS3_data data10 = new ALM_HIS3_data();
} /* In case that the number of data is 10 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBAHIS3
{
public ushort s_no; /* start number */
public ushort e_no; /* end number */
public ALM_HIS3 alm_his = new ALM_HIS3();
}
/* cnc_rdalmhistry5:read alarm history data */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ALM_HIS5_data
{
public short alm_grp; /* alarm group */
public short alm_no; /* alarm number */
public short axis_no; /* axis number */
public short year; /* year */
public short month; /* month */
public short day; /* day */
public short hour; /* hour */
public short minute; /* minute */
public short second; /* second */
public short len_msg; /* alarm message length */
public short pth_no; /* path index */
public short dummy; /* dummy */
public short dsp_flg; /* Flag for displaying */
public short axis_num; /* Total axis number */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 64)]
public string alm_msg = new string(' ', 64); /* alarm message */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 10)]
public int[] g_modal; /* G code Modal */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 10)]
public byte[] g_dp; /* #7:1 Block #6乣#0 dp */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 10)]
public int[] a_modal; /* B,D,E,F,H,M,N,O,S,T code Modal */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 10)]
public byte[] a_dp; /* #7:1 Block #6乣#0 dp */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 32)]
public int[] abs_pos; /* Abs pos */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 32)]
public byte[] abs_dp; /* Abs dp */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 32)]
public int[] mcn_pos; /* Mcn pos */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 32)]
public byte[] mcn_dp; /* Mcn dp */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ALM_HIS5
{
public ALM_HIS5_data data1 = new ALM_HIS5_data();
public ALM_HIS5_data data2 = new ALM_HIS5_data();
public ALM_HIS5_data data3 = new ALM_HIS5_data();
public ALM_HIS5_data data4 = new ALM_HIS5_data();
public ALM_HIS5_data data5 = new ALM_HIS5_data();
public ALM_HIS5_data data6 = new ALM_HIS5_data();
public ALM_HIS5_data data7 = new ALM_HIS5_data();
public ALM_HIS5_data data8 = new ALM_HIS5_data();
public ALM_HIS5_data data9 = new ALM_HIS5_data();
public ALM_HIS5_data data10 = new ALM_HIS5_data();
} /* In case that the number of data is 10 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBAHIS5
{
public ushort s_no; /* start number */
public ushort e_no; /* end number */
public ALM_HIS5 alm_his = new ALM_HIS5();
}
/* cnc_rdomhistry2:read operater message history data */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ODBOMHIS2_data
{
public short dsp_flg; /* Dysplay flag(ON/OFF) */
public short om_no; /* operater message number */
public short year; /* year */
public short month; /* month */
public short day; /* day */
public short hour; /* Hour */
public short minute; /* Minute */
public short second; /* Second */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 256)]
public string alm_msg = new string(' ', 256); /* alarm message */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class OPM_HIS
{
public ODBOMHIS2_data data1 = new ODBOMHIS2_data();
public ODBOMHIS2_data data2 = new ODBOMHIS2_data();
public ODBOMHIS2_data data3 = new ODBOMHIS2_data();
public ODBOMHIS2_data data4 = new ODBOMHIS2_data();
public ODBOMHIS2_data data5 = new ODBOMHIS2_data();
public ODBOMHIS2_data data6 = new ODBOMHIS2_data();
public ODBOMHIS2_data data7 = new ODBOMHIS2_data();
public ODBOMHIS2_data data8 = new ODBOMHIS2_data();
public ODBOMHIS2_data data9 = new ODBOMHIS2_data();
public ODBOMHIS2_data data10 = new ODBOMHIS2_data();
} /* In case that the number of data is 10 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBOMHIS2
{
public ushort s_no; /* start number */
public ushort e_no; /* end number */
public OPM_HIS opm_his = new OPM_HIS();
}
/* cnc_rdhissgnl:read signals related operation history */
/* cnc_wrhissgnl:write signals related operation history */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class IODBSIG_data
{
public short ent_no; /* entry number */
public short sig_no; /* signal number */
public byte sig_name; /* signal name */
public byte mask_pat; /* signal mask pattern */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBSIG1
{
public IODBSIG_data data1 = new IODBSIG_data();
public IODBSIG_data data2 = new IODBSIG_data();
public IODBSIG_data data3 = new IODBSIG_data();
public IODBSIG_data data4 = new IODBSIG_data();
public IODBSIG_data data5 = new IODBSIG_data();
public IODBSIG_data data6 = new IODBSIG_data();
public IODBSIG_data data7 = new IODBSIG_data();
public IODBSIG_data data8 = new IODBSIG_data();
public IODBSIG_data data9 = new IODBSIG_data();
public IODBSIG_data data10 = new IODBSIG_data();
public IODBSIG_data data11 = new IODBSIG_data();
public IODBSIG_data data12 = new IODBSIG_data();
public IODBSIG_data data13 = new IODBSIG_data();
public IODBSIG_data data14 = new IODBSIG_data();
public IODBSIG_data data15 = new IODBSIG_data();
public IODBSIG_data data16 = new IODBSIG_data();
public IODBSIG_data data17 = new IODBSIG_data();
public IODBSIG_data data18 = new IODBSIG_data();
public IODBSIG_data data19 = new IODBSIG_data();
public IODBSIG_data data20 = new IODBSIG_data();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBSIG
{
public short datano; /* dummy */
public short type; /* dummy */
public IODBSIG1 data = new IODBSIG1();
}
/* cnc_rdhissgnl2:read signals related operation history 2 */
/* cnc_wrhissgnl2:write signals related operation history 2 */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class _IODBSIG2_data
{
public short ent_no; /* entry number */
public short sig_no; /* signal number */
public byte sig_name; /* signal name */
public byte mask_pat; /* signal mask pattern */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBSIG2_data
{
public _IODBSIG2_data data1 = new _IODBSIG2_data();
public _IODBSIG2_data data2 = new _IODBSIG2_data();
public _IODBSIG2_data data3 = new _IODBSIG2_data();
public _IODBSIG2_data data4 = new _IODBSIG2_data();
public _IODBSIG2_data data5 = new _IODBSIG2_data();
public _IODBSIG2_data data6 = new _IODBSIG2_data();
public _IODBSIG2_data data7 = new _IODBSIG2_data();
public _IODBSIG2_data data8 = new _IODBSIG2_data();
public _IODBSIG2_data data9 = new _IODBSIG2_data();
public _IODBSIG2_data data10 = new _IODBSIG2_data();
public _IODBSIG2_data data11 = new _IODBSIG2_data();
public _IODBSIG2_data data12 = new _IODBSIG2_data();
public _IODBSIG2_data data13 = new _IODBSIG2_data();
public _IODBSIG2_data data14 = new _IODBSIG2_data();
public _IODBSIG2_data data15 = new _IODBSIG2_data();
public _IODBSIG2_data data16 = new _IODBSIG2_data();
public _IODBSIG2_data data17 = new _IODBSIG2_data();
public _IODBSIG2_data data18 = new _IODBSIG2_data();
public _IODBSIG2_data data19 = new _IODBSIG2_data();
public _IODBSIG2_data data20 = new _IODBSIG2_data();
public _IODBSIG2_data data31 = new _IODBSIG2_data();
public _IODBSIG2_data data32 = new _IODBSIG2_data();
public _IODBSIG2_data data33 = new _IODBSIG2_data();
public _IODBSIG2_data data34 = new _IODBSIG2_data();
public _IODBSIG2_data data35 = new _IODBSIG2_data();
public _IODBSIG2_data data36 = new _IODBSIG2_data();
public _IODBSIG2_data data37 = new _IODBSIG2_data();
public _IODBSIG2_data data38 = new _IODBSIG2_data();
public _IODBSIG2_data data39 = new _IODBSIG2_data();
public _IODBSIG2_data data40 = new _IODBSIG2_data();
public _IODBSIG2_data data41 = new _IODBSIG2_data();
public _IODBSIG2_data data42 = new _IODBSIG2_data();
public _IODBSIG2_data data43 = new _IODBSIG2_data();
public _IODBSIG2_data data44 = new _IODBSIG2_data();
public _IODBSIG2_data data45 = new _IODBSIG2_data();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBSIG2
{
public short datano; /* dummy */
public short type; /* dummy */
public IODBSIG2_data data = new IODBSIG2_data();
}
/* cnc_rdhissgnl3:read signals related operation history */
/* cnc_wrhissgnl3:write signals related operation history */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class _IODBSIG3_data
{
public short ent_no; /* entry number */
public short pmc_no; /* pmc number */
public short sig_no; /* signal number */
public byte sig_name; /* signal name */
public byte mask_pat; /* signal mask pattern */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBSIG3_data
{
public _IODBSIG3_data data1 = new _IODBSIG3_data();
public _IODBSIG3_data data2 = new _IODBSIG3_data();
public _IODBSIG3_data data3 = new _IODBSIG3_data();
public _IODBSIG3_data data4 = new _IODBSIG3_data();
public _IODBSIG3_data data5 = new _IODBSIG3_data();
public _IODBSIG3_data data6 = new _IODBSIG3_data();
public _IODBSIG3_data data7 = new _IODBSIG3_data();
public _IODBSIG3_data data8 = new _IODBSIG3_data();
public _IODBSIG3_data data9 = new _IODBSIG3_data();
public _IODBSIG3_data data10 = new _IODBSIG3_data();
public _IODBSIG3_data data11 = new _IODBSIG3_data();
public _IODBSIG3_data data12 = new _IODBSIG3_data();
public _IODBSIG3_data data13 = new _IODBSIG3_data();
public _IODBSIG3_data data14 = new _IODBSIG3_data();
public _IODBSIG3_data data15 = new _IODBSIG3_data();
public _IODBSIG3_data data16 = new _IODBSIG3_data();
public _IODBSIG3_data data17 = new _IODBSIG3_data();
public _IODBSIG3_data data18 = new _IODBSIG3_data();
public _IODBSIG3_data data19 = new _IODBSIG3_data();
public _IODBSIG3_data data20 = new _IODBSIG3_data();
public _IODBSIG3_data data21 = new _IODBSIG3_data();
public _IODBSIG3_data data22 = new _IODBSIG3_data();
public _IODBSIG3_data data23 = new _IODBSIG3_data();
public _IODBSIG3_data data24 = new _IODBSIG3_data();
public _IODBSIG3_data data25 = new _IODBSIG3_data();
public _IODBSIG3_data data26 = new _IODBSIG3_data();
public _IODBSIG3_data data27 = new _IODBSIG3_data();
public _IODBSIG3_data data28 = new _IODBSIG3_data();
public _IODBSIG3_data data29 = new _IODBSIG3_data();
public _IODBSIG3_data data30 = new _IODBSIG3_data();
public _IODBSIG3_data data31 = new _IODBSIG3_data();
public _IODBSIG3_data data32 = new _IODBSIG3_data();
public _IODBSIG3_data data33 = new _IODBSIG3_data();
public _IODBSIG3_data data34 = new _IODBSIG3_data();
public _IODBSIG3_data data35 = new _IODBSIG3_data();
public _IODBSIG3_data data36 = new _IODBSIG3_data();
public _IODBSIG3_data data37 = new _IODBSIG3_data();
public _IODBSIG3_data data38 = new _IODBSIG3_data();
public _IODBSIG3_data data39 = new _IODBSIG3_data();
public _IODBSIG3_data data40 = new _IODBSIG3_data();
public _IODBSIG3_data data41 = new _IODBSIG3_data();
public _IODBSIG3_data data42 = new _IODBSIG3_data();
public _IODBSIG3_data data43 = new _IODBSIG3_data();
public _IODBSIG3_data data44 = new _IODBSIG3_data();
public _IODBSIG3_data data45 = new _IODBSIG3_data();
public _IODBSIG3_data data46 = new _IODBSIG3_data();
public _IODBSIG3_data data47 = new _IODBSIG3_data();
public _IODBSIG3_data data48 = new _IODBSIG3_data();
public _IODBSIG3_data data49 = new _IODBSIG3_data();
public _IODBSIG3_data data50 = new _IODBSIG3_data();
public _IODBSIG3_data data51 = new _IODBSIG3_data();
public _IODBSIG3_data data52 = new _IODBSIG3_data();
public _IODBSIG3_data data53 = new _IODBSIG3_data();
public _IODBSIG3_data data54 = new _IODBSIG3_data();
public _IODBSIG3_data data55 = new _IODBSIG3_data();
public _IODBSIG3_data data56 = new _IODBSIG3_data();
public _IODBSIG3_data data57 = new _IODBSIG3_data();
public _IODBSIG3_data data58 = new _IODBSIG3_data();
public _IODBSIG3_data data59 = new _IODBSIG3_data();
public _IODBSIG3_data data60 = new _IODBSIG3_data();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBSIG3
{
public short datano; /* dummy */
public short type; /* dummy */
public IODBSIG3_data data = new IODBSIG3_data();
}
/*-------------*/
/* CNC: Others */
/*-------------*/
/* cnc_sysinfo:read CNC system information */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSYS
{
public short addinfo;
public short max_axis;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2)]
public char[] cnc_type;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2)]
public char[] mt_type;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 4)]
public char[] series;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 4)]
public char[] version;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2)]
public char[] axes;
}
#if FS15D
/* cnc_statinfo:read CNC status information */
[StructLayout(LayoutKind.Sequential,Pack=4)]
public class ODBST
{
[MarshalAs(UnmanagedType.ByValArray,SizeConst=2)]
public short[] dummy; /* dummy */
public short aut; /* selected automatic mode */
public short manual; /* selected manual mode */
public short run; /* running status */
public short edit; /* editting status */
public short motion; /* axis, dwell status */
public short mstb; /* m, s, t, b status */
public short emergency; /* emergency stop status */
public short write; /* writting status */
public short labelskip; /* label skip status */
public short alarm; /* alarm status */
public short warning; /* warning status */
public short battery; /* battery status */
}
#else
/* cnc_statinfo:read CNC status information */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBST
{
public short dummy; /* dummy */
public short tmmode; /* T/M mode */
public short aut; /* selected automatic mode */
public short run; /* running status */
public short motion; /* axis, dwell status */
public short mstb; /* m, s, t, b status */
public short emergency; /* emergency stop status */
public short alarm; /* alarm status */
public short edit; /* editting status */
}
#endif
/* cnc_alarm:read alarm status */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBALM
{
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2)]
public short[] dummy = { 0, 0 };
public ushort data = 0;
}
/* cnc_rdalminfo:read alarm information */
#if M_AXIS2
[StructLayout(LayoutKind.Sequential,Pack=4)]
public class ALMINFO1_data
{
public int axis;
public short alm_no;
}
[StructLayout(LayoutKind.Sequential,CharSet=CharSet.Ansi,Pack=4)]
public class ALMINFO2_data
{
public int axis=0 ;
public short alm_no=0 ;
public short msg_len=0 ;
[MarshalAs(UnmanagedType.ByValTStr,SizeConst=32)]
public string alm_msg= new string(' ',32) ;
}
#else
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ALMINFO1_data
{
public short axis;
public short alm_no;
}
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ALMINFO2_data
{
public short axis = 0;
public short alm_no = 0;
public short msg_len = 0;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 32)]
public string alm_msg = new string(' ', 32);
}
#endif
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ALMINFO_1
{
public ALMINFO1_data msg1 = new ALMINFO1_data();
public ALMINFO1_data msg2 = new ALMINFO1_data();
public ALMINFO1_data msg3 = new ALMINFO1_data();
public ALMINFO1_data msg4 = new ALMINFO1_data();
public ALMINFO1_data msg5 = new ALMINFO1_data();
public short data_end;
} /* In case that the number of alarm is 5 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ALMINFO_2
{
public ALMINFO2_data msg1 = new ALMINFO2_data();
public ALMINFO2_data msg2 = new ALMINFO2_data();
public ALMINFO2_data msg3 = new ALMINFO2_data();
public ALMINFO2_data msg4 = new ALMINFO2_data();
public ALMINFO2_data msg5 = new ALMINFO2_data();
public short dataend = 0;
} /* In case that the number of alarm is 5 */
/* cnc_rdalmmsg:read alarm messages */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ODBALMMSG_data
{
public int alm_no;
public short type;
public short axis;
public short dummy;
public short msg_len;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 32)]
public string alm_msg = new string(' ', 32);
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBALMMSG
{
public ODBALMMSG_data msg1 = new ODBALMMSG_data();
public ODBALMMSG_data msg2 = new ODBALMMSG_data();
public ODBALMMSG_data msg3 = new ODBALMMSG_data();
public ODBALMMSG_data msg4 = new ODBALMMSG_data();
public ODBALMMSG_data msg5 = new ODBALMMSG_data();
public ODBALMMSG_data msg6 = new ODBALMMSG_data();
public ODBALMMSG_data msg7 = new ODBALMMSG_data();
public ODBALMMSG_data msg8 = new ODBALMMSG_data();
public ODBALMMSG_data msg9 = new ODBALMMSG_data();
public ODBALMMSG_data msg10 = new ODBALMMSG_data();
} /* In case that the number of alarm is 10 */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ODBALMMSG2_data
{
public int alm_no;
public short type;
public short axis;
public short dummy;
public short msg_len;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 64)]
public string alm_msg = new string(' ', 64);
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBALMMSG2
{
public ODBALMMSG2_data msg1 = new ODBALMMSG2_data();
public ODBALMMSG2_data msg2 = new ODBALMMSG2_data();
public ODBALMMSG2_data msg3 = new ODBALMMSG2_data();
public ODBALMMSG2_data msg4 = new ODBALMMSG2_data();
public ODBALMMSG2_data msg5 = new ODBALMMSG2_data();
public ODBALMMSG2_data msg6 = new ODBALMMSG2_data();
public ODBALMMSG2_data msg7 = new ODBALMMSG2_data();
public ODBALMMSG2_data msg8 = new ODBALMMSG2_data();
public ODBALMMSG2_data msg9 = new ODBALMMSG2_data();
public ODBALMMSG2_data msg10 = new ODBALMMSG2_data();
} /* In case that the number of alarm is 10 */
/* cnc_modal:read modal data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class MODAL_AUX_data
{
public int aux_data;
public byte flag1;
public byte flag2;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class MODAL_RAUX1_data
{
public MODAL_AUX_data data1 = new MODAL_AUX_data();
public MODAL_AUX_data data2 = new MODAL_AUX_data();
public MODAL_AUX_data data3 = new MODAL_AUX_data();
public MODAL_AUX_data data4 = new MODAL_AUX_data();
public MODAL_AUX_data data5 = new MODAL_AUX_data();
public MODAL_AUX_data data6 = new MODAL_AUX_data();
public MODAL_AUX_data data7 = new MODAL_AUX_data();
public MODAL_AUX_data data8 = new MODAL_AUX_data();
public MODAL_AUX_data data9 = new MODAL_AUX_data();
public MODAL_AUX_data data10 = new MODAL_AUX_data();
public MODAL_AUX_data data11 = new MODAL_AUX_data();
public MODAL_AUX_data data12 = new MODAL_AUX_data();
public MODAL_AUX_data data13 = new MODAL_AUX_data();
public MODAL_AUX_data data14 = new MODAL_AUX_data();
public MODAL_AUX_data data15 = new MODAL_AUX_data();
public MODAL_AUX_data data16 = new MODAL_AUX_data();
public MODAL_AUX_data data17 = new MODAL_AUX_data();
public MODAL_AUX_data data18 = new MODAL_AUX_data();
public MODAL_AUX_data data19 = new MODAL_AUX_data();
public MODAL_AUX_data data20 = new MODAL_AUX_data();
public MODAL_AUX_data data21 = new MODAL_AUX_data();
public MODAL_AUX_data data22 = new MODAL_AUX_data();
public MODAL_AUX_data data23 = new MODAL_AUX_data();
public MODAL_AUX_data data24 = new MODAL_AUX_data();
public MODAL_AUX_data data25 = new MODAL_AUX_data();
public MODAL_AUX_data data26 = new MODAL_AUX_data();
public MODAL_AUX_data data27 = new MODAL_AUX_data();
}
#if M_AXIS2
[StructLayout(LayoutKind.Sequential,Pack=4)]
public class MODAL_RAUX2_data
{
public MODAL_AUX_data data1 = new MODAL_AUX_data();
public MODAL_AUX_data data2 = new MODAL_AUX_data();
public MODAL_AUX_data data3 = new MODAL_AUX_data();
public MODAL_AUX_data data4 = new MODAL_AUX_data();
public MODAL_AUX_data data5 = new MODAL_AUX_data();
public MODAL_AUX_data data6 = new MODAL_AUX_data();
public MODAL_AUX_data data7 = new MODAL_AUX_data();
public MODAL_AUX_data data8 = new MODAL_AUX_data();
public MODAL_AUX_data data9 = new MODAL_AUX_data();
public MODAL_AUX_data data10= new MODAL_AUX_data();
public MODAL_AUX_data data11= new MODAL_AUX_data();
public MODAL_AUX_data data12= new MODAL_AUX_data();
public MODAL_AUX_data data13= new MODAL_AUX_data();
public MODAL_AUX_data data14= new MODAL_AUX_data();
public MODAL_AUX_data data15= new MODAL_AUX_data();
public MODAL_AUX_data data16= new MODAL_AUX_data();
public MODAL_AUX_data data17= new MODAL_AUX_data();
public MODAL_AUX_data data18= new MODAL_AUX_data();
public MODAL_AUX_data data19= new MODAL_AUX_data();
public MODAL_AUX_data data20= new MODAL_AUX_data();
public MODAL_AUX_data data21= new MODAL_AUX_data();
public MODAL_AUX_data data22= new MODAL_AUX_data();
public MODAL_AUX_data data23= new MODAL_AUX_data();
public MODAL_AUX_data data24= new MODAL_AUX_data();
}
#elif FS15D
[StructLayout(LayoutKind.Sequential,Pack=4)]
public class MODAL_RAUX2_data
{
public MODAL_AUX_data data1 = new MODAL_AUX_data();
public MODAL_AUX_data data2 = new MODAL_AUX_data();
public MODAL_AUX_data data3 = new MODAL_AUX_data();
public MODAL_AUX_data data4 = new MODAL_AUX_data();
public MODAL_AUX_data data5 = new MODAL_AUX_data();
public MODAL_AUX_data data6 = new MODAL_AUX_data();
public MODAL_AUX_data data7 = new MODAL_AUX_data();
public MODAL_AUX_data data8 = new MODAL_AUX_data();
public MODAL_AUX_data data9 = new MODAL_AUX_data();
public MODAL_AUX_data data10= new MODAL_AUX_data();
}
#else
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class MODAL_RAUX2_data
{
public MODAL_AUX_data data1 = new MODAL_AUX_data();
public MODAL_AUX_data data2 = new MODAL_AUX_data();
public MODAL_AUX_data data3 = new MODAL_AUX_data();
public MODAL_AUX_data data4 = new MODAL_AUX_data();
public MODAL_AUX_data data5 = new MODAL_AUX_data();
public MODAL_AUX_data data6 = new MODAL_AUX_data();
public MODAL_AUX_data data7 = new MODAL_AUX_data();
public MODAL_AUX_data data8 = new MODAL_AUX_data();
}
#endif
[StructLayout(LayoutKind.Explicit)]
public class ODBMDL_1
{
[FieldOffset(0)]
public short datano;
[FieldOffset(2)]
public short type;
[FieldOffset(4)]
public byte g_data;
}
[StructLayout(LayoutKind.Explicit)]
public class ODBMDL_2
{
[FieldOffset(0)]
public short datano;
[FieldOffset(2)]
public short type;
[FieldOffset(4),
MarshalAs(UnmanagedType.ByValArray, SizeConst = 4)]
public byte[] g_1shot = new byte[4];
[FieldOffset(4),
MarshalAs(UnmanagedType.ByValArray, SizeConst = 35)]
public byte[] g_rdata = new byte[35];
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBMDL_3
{
public short datano;
public short type;
public MODAL_AUX_data aux = new MODAL_AUX_data();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBMDL_4
{
public short datano;
public short type;
public MODAL_RAUX1_data raux1 = new MODAL_RAUX1_data();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBMDL_5
{
public short datano;
public short type;
public MODAL_RAUX2_data raux2 = new MODAL_RAUX2_data();
}
/* cnc_rdgcode: read G code */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ODBGCD_data
{
public short group;
public short flag;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 8)]
public string code = new string(' ', 8);
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBGCD
{
public ODBGCD_data gcd0 = new ODBGCD_data();
public ODBGCD_data gcd1 = new ODBGCD_data();
public ODBGCD_data gcd2 = new ODBGCD_data();
public ODBGCD_data gcd3 = new ODBGCD_data();
public ODBGCD_data gcd4 = new ODBGCD_data();
public ODBGCD_data gcd5 = new ODBGCD_data();
public ODBGCD_data gcd6 = new ODBGCD_data();
public ODBGCD_data gcd7 = new ODBGCD_data();
public ODBGCD_data gcd8 = new ODBGCD_data();
public ODBGCD_data gcd9 = new ODBGCD_data();
public ODBGCD_data gcd10 = new ODBGCD_data();
public ODBGCD_data gcd11 = new ODBGCD_data();
public ODBGCD_data gcd12 = new ODBGCD_data();
public ODBGCD_data gcd13 = new ODBGCD_data();
public ODBGCD_data gcd14 = new ODBGCD_data();
public ODBGCD_data gcd15 = new ODBGCD_data();
public ODBGCD_data gcd16 = new ODBGCD_data();
public ODBGCD_data gcd17 = new ODBGCD_data();
public ODBGCD_data gcd18 = new ODBGCD_data();
public ODBGCD_data gcd19 = new ODBGCD_data();
public ODBGCD_data gcd20 = new ODBGCD_data();
public ODBGCD_data gcd21 = new ODBGCD_data();
public ODBGCD_data gcd22 = new ODBGCD_data();
public ODBGCD_data gcd23 = new ODBGCD_data();
public ODBGCD_data gcd24 = new ODBGCD_data();
public ODBGCD_data gcd25 = new ODBGCD_data();
public ODBGCD_data gcd26 = new ODBGCD_data();
public ODBGCD_data gcd27 = new ODBGCD_data();
}
/* cnc_rdcommand: read command value */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBCMD_data
{
public byte adrs;
public byte num;
public short flag;
public int cmd_val;
public int dec_val;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBCMD
{
public ODBCMD_data cmd0 = new ODBCMD_data();
public ODBCMD_data cmd1 = new ODBCMD_data();
public ODBCMD_data cmd2 = new ODBCMD_data();
public ODBCMD_data cmd3 = new ODBCMD_data();
public ODBCMD_data cmd4 = new ODBCMD_data();
public ODBCMD_data cmd5 = new ODBCMD_data();
public ODBCMD_data cmd6 = new ODBCMD_data();
public ODBCMD_data cmd7 = new ODBCMD_data();
public ODBCMD_data cmd8 = new ODBCMD_data();
public ODBCMD_data cmd9 = new ODBCMD_data();
public ODBCMD_data cmd10 = new ODBCMD_data();
public ODBCMD_data cmd11 = new ODBCMD_data();
public ODBCMD_data cmd12 = new ODBCMD_data();
public ODBCMD_data cmd13 = new ODBCMD_data();
public ODBCMD_data cmd14 = new ODBCMD_data();
public ODBCMD_data cmd15 = new ODBCMD_data();
public ODBCMD_data cmd16 = new ODBCMD_data();
public ODBCMD_data cmd17 = new ODBCMD_data();
public ODBCMD_data cmd18 = new ODBCMD_data();
public ODBCMD_data cmd19 = new ODBCMD_data();
public ODBCMD_data cmd20 = new ODBCMD_data();
public ODBCMD_data cmd21 = new ODBCMD_data();
public ODBCMD_data cmd22 = new ODBCMD_data();
public ODBCMD_data cmd23 = new ODBCMD_data();
public ODBCMD_data cmd24 = new ODBCMD_data();
public ODBCMD_data cmd25 = new ODBCMD_data();
public ODBCMD_data cmd26 = new ODBCMD_data();
public ODBCMD_data cmd27 = new ODBCMD_data();
public ODBCMD_data cmd28 = new ODBCMD_data();
public ODBCMD_data cmd29 = new ODBCMD_data();
}
/* cnc_diagnoss:read diagnosis data */
/* cnc_diagnosr:read diagnosis data(area specified) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REALDGN
{
public int dgn_val; /* data of real diagnoss */
public int dec_val; /* decimal point of real diagnoss */
}
#if M_AXIS2
[StructLayout(LayoutKind.Sequential,Pack=4)]
public class REALDGNS
{
public REALDGN rdata1=new REALDGN();
public REALDGN rdata2=new REALDGN();
public REALDGN rdata3=new REALDGN();
public REALDGN rdata4=new REALDGN();
public REALDGN rdata5=new REALDGN();
public REALDGN rdata6=new REALDGN();
public REALDGN rdata7=new REALDGN();
public REALDGN rdata8=new REALDGN();
public REALDGN rdata9=new REALDGN();
public REALDGN rdata10=new REALDGN();
public REALDGN rdata11=new REALDGN();
public REALDGN rdata12=new REALDGN();
public REALDGN rdata13=new REALDGN();
public REALDGN rdata14=new REALDGN();
public REALDGN rdata15=new REALDGN();
public REALDGN rdata16=new REALDGN();
public REALDGN rdata17=new REALDGN();
public REALDGN rdata18=new REALDGN();
public REALDGN rdata19=new REALDGN();
public REALDGN rdata20=new REALDGN();
public REALDGN rdata21=new REALDGN();
public REALDGN rdata22=new REALDGN();
public REALDGN rdata23=new REALDGN();
public REALDGN rdata24=new REALDGN();
} /* In case that the number of alarm is 24 */
#elif FS15D
[StructLayout(LayoutKind.Sequential,Pack=4)]
public class REALDGNS
{
public REALDGN rdata1=new REALDGN();
public REALDGN rdata2=new REALDGN();
public REALDGN rdata3=new REALDGN();
public REALDGN rdata4=new REALDGN();
public REALDGN rdata5=new REALDGN();
public REALDGN rdata6=new REALDGN();
public REALDGN rdata7=new REALDGN();
public REALDGN rdata8=new REALDGN();
public REALDGN rdata9=new REALDGN();
public REALDGN rdata10=new REALDGN();
} /* In case that the number of alarm is 10 */
#else
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class REALDGNS
{
public REALDGN rdata1 = new REALDGN();
public REALDGN rdata2 = new REALDGN();
public REALDGN rdata3 = new REALDGN();
public REALDGN rdata4 = new REALDGN();
public REALDGN rdata5 = new REALDGN();
public REALDGN rdata6 = new REALDGN();
public REALDGN rdata7 = new REALDGN();
public REALDGN rdata8 = new REALDGN();
} /* In case that the number of alarm is 8 */
#endif
[StructLayout(LayoutKind.Explicit)]
public class ODBDGN_1
{
[FieldOffset(0)]
public short datano; /* data number */
[FieldOffset(2)]
public short type; /* axis number */
[FieldOffset(4)]
public byte cdata; /* parameter / setting data */
[FieldOffset(4)]
public short idata;
[FieldOffset(4)]
public int ldata;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBDGN_2
{
public short datano; /* data number */
public short type; /* axis number */
public REALDGN rdata = new REALDGN();
}
[StructLayout(LayoutKind.Explicit)]
public class ODBDGN_3
{
[FieldOffset(0)]
public short datano; /* data number */
[FieldOffset(2)]
public short type; /* axis number */
[FieldOffset(4),
MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public byte[] cdatas;
[FieldOffset(4),
MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public short[] idatas;
[FieldOffset(4),
MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] ldatas;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBDGN_4
{
public short datano; /* data number */
public short type; /* axis number */
public REALDGNS rdatas = new REALDGNS();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBDGN_A
{
public ODBDGN_1 data1 = new ODBDGN_1();
public ODBDGN_1 data2 = new ODBDGN_1();
public ODBDGN_1 data3 = new ODBDGN_1();
public ODBDGN_1 data4 = new ODBDGN_1();
public ODBDGN_1 data5 = new ODBDGN_1();
public ODBDGN_1 data6 = new ODBDGN_1();
public ODBDGN_1 data7 = new ODBDGN_1();
} /* (sample) must be modified */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBDGN_B
{
public ODBDGN_2 data1 = new ODBDGN_2();
public ODBDGN_2 data2 = new ODBDGN_2();
public ODBDGN_2 data3 = new ODBDGN_2();
public ODBDGN_2 data4 = new ODBDGN_2();
public ODBDGN_2 data5 = new ODBDGN_2();
public ODBDGN_2 data6 = new ODBDGN_2();
public ODBDGN_2 data7 = new ODBDGN_2();
} /* (sample) must be modified */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBDGN_C
{
public ODBDGN_3 data1 = new ODBDGN_3();
public ODBDGN_3 data2 = new ODBDGN_3();
public ODBDGN_3 data3 = new ODBDGN_3();
public ODBDGN_3 data4 = new ODBDGN_3();
public ODBDGN_3 data5 = new ODBDGN_3();
public ODBDGN_3 data6 = new ODBDGN_3();
public ODBDGN_3 data7 = new ODBDGN_3();
} /* (sample) must be modified */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBDGN_D
{
public ODBDGN_4 data1 = new ODBDGN_4();
public ODBDGN_4 data2 = new ODBDGN_4();
public ODBDGN_4 data3 = new ODBDGN_4();
public ODBDGN_4 data4 = new ODBDGN_4();
public ODBDGN_4 data5 = new ODBDGN_4();
public ODBDGN_4 data6 = new ODBDGN_4();
public ODBDGN_4 data7 = new ODBDGN_4();
} /* (sample) must be modified */
/* cnc_adcnv:read A/D conversion data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBAD
{
public short datano; /* input analog voltage type */
public short type; /* analog voltage type */
public short data; /* digital voltage data */
}
#if FS15D
/* cnc_rdopmsg:read operator's message */
[StructLayout(LayoutKind.Sequential,CharSet=CharSet.Ansi,Pack=4)]
public class OPMSG_data
{
public short datano ; /* operator's message number */
public short type ; /* operator's message type */
public short char_num ; /* message string length */
[MarshalAs(UnmanagedType.ByValTStr,SizeConst=129)]
public string data= new string(' ',129) ; /* operator's message string */
} /* In case that the data length is 129 */
#else
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class OPMSG_data
{
public short datano; /* operator's message number */
public short type; /* operator's message type */
public short char_num; /* message string length */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 256)]
public string data = new string(' ', 256); /* operator's message string */
} /* In case that the data length is 256 */
#endif
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class OPMSG
{
public OPMSG_data msg1 = new OPMSG_data();
public OPMSG_data msg2 = new OPMSG_data();
public OPMSG_data msg3 = new OPMSG_data();
public OPMSG_data msg4 = new OPMSG_data();
public OPMSG_data msg5 = new OPMSG_data();
}
/* cnc_rdopmsg2:read operator's message */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class OPMSG2_data
{
public short datano; /* operator's message number */
public short type; /* operator's message type */
public short char_num; /* message string length */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 64)]
public string data = new string(' ', 64); /* operator's message string */
} /* In case that the data length is 64 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class OPMSG2
{
public OPMSG2_data msg1 = new OPMSG2_data();
public OPMSG2_data msg2 = new OPMSG2_data();
public OPMSG2_data msg3 = new OPMSG2_data();
public OPMSG2_data msg4 = new OPMSG2_data();
public OPMSG2_data msg5 = new OPMSG2_data();
}
/* cnc_rdopmsg3:read operator's message */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class OPMSG3_data
{
public short datano; /* operator's message number */
public short type; /* operator's message type */
public short char_num; /* message string length */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 256)]
public string data = new string(' ', 256); /* operator's message string */
} /* In case that the data length is 256 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class OPMSG3
{
public OPMSG3_data msg1 = new OPMSG3_data();
public OPMSG3_data msg2 = new OPMSG3_data();
public OPMSG3_data msg3 = new OPMSG3_data();
public OPMSG3_data msg4 = new OPMSG3_data();
public OPMSG3_data msg5 = new OPMSG3_data();
}
/* cnc_sysconfig:read CNC configuration information */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ODBSYSC
{
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 16)]
public byte[] slot_no_p;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 16)]
public byte[] slot_no_l;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 16)]
public short[] mod_id;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 16)]
public short[] soft_id;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_series1 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_series2 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_series3 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_series4 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_series5 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_series6 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_series7 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_series8 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_series9 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_series10 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_series11 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_series12 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_series13 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_series14 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_series15 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_series16 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_version1 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_version2 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_version3 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_version4 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_version5 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_version6 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_version7 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_version8 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_version9 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_version10 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_version11 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_version12 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_version13 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_version14 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_version15 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string s_version16 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 16)]
public byte[] dummy;
public short m_rom;
public short s_rom;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 8)]
public char[] svo_soft;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 6)]
public char[] pmc_soft;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 6)]
public char[] lad_soft;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 8)]
public char[] mcr_soft;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 6)]
public char[] spl1_soft;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 6)]
public char[] spl2_soft;
public short frmmin;
public short drmmin;
public short srmmin;
public short pmcmin;
public short crtmin;
public short sv1min;
public short sv3min;
public short sicmin;
public short posmin;
public short drmmrc;
public short drmarc;
public short pmcmrc;
public short dmaarc;
public short iopt;
public short hdiio;
public short frmsub;
public short drmsub;
public short srmsub;
public short sv5sub;
public short sv7sub;
public short sicsub;
public short possub;
public short hamsub;
public short gm2gr1;
public short crtgr2;
public short gm1gr2;
public short gm2gr2;
public short cmmrb;
public short sv5axs;
public short sv7axs;
public short sicaxs;
public short posaxs;
public short hanaxs;
public short romr64;
public short srmr64;
public short dr1r64;
public short dr2r64;
public short iopio2;
public short hdiio2;
public short cmmrb2;
public short romfap;
public short srmfap;
public short drmfap;
}
/* cnc_rdprstrinfo:read program restart information */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBPRS
{
public short datano; /* dummy */
public short type; /* dummy */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 5)]
public short[] data_info; /* data setting information */
public int rstr_bc; /* block counter */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 35)]
public int[] rstr_m; /* M code value */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2)]
public int[] rstr_t; /* T code value */
public int rstr_s; /* S code value */
public int rstr_b; /* B code value */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] dest; /* program re-start position */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] dist; /* program re-start distance */
}
#if FS15D
/* cnc_rdopnlsgnl:read output signal image of software operator's panel */
/* cnc_wropnlsgnl:write output signal of software operator's panel */
[StructLayout(LayoutKind.Sequential,Pack=4)]
public class IODBSGNL
{
public short datano; /* dummy */
public short type; /* data select flag */
public short mode; /* mode signal */
public short hndl_ax; /* Manual handle feed axis selection signal */
public short hndl_mv; /* Manual handle feed travel distance selection signal */
public short rpd_ovrd; /* rapid traverse override signal */
public short jog_ovrd; /* manual feedrate override signal */
public short feed_ovrd; /* feedrate override signal */
public short spdl_ovrd; /* spindle override signal */
public short blck_del; /* optional block skip signal */
public short sngl_blck; /* single block signal */
public short machn_lock; /* machine lock signal */
public short dry_run; /* dry run signal */
public short mem_prtct; /* memory protection signal */
public short feed_hold; /* automatic operation halt signal */
public short manual_rpd; /* (not used) */
[MarshalAs(UnmanagedType.ByValArray,SizeConst=2)]
public short[] dummy; /* (not used) */
}
#else
/* cnc_rdopnlsgnl:read output signal image of software operator's panel */
/* cnc_wropnlsgnl:write output signal of software operator's panel */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBSGNL
{
public short datano; /* dummy */
public short type; /* data select flag */
public short mode; /* mode signal */
public short hndl_ax; /* Manual handle feed axis selection signal */
public short hndl_mv; /* Manual handle feed travel distance selection signal */
public short rpd_ovrd; /* rapid traverse override signal */
public short jog_ovrd; /* manual feedrate override signal */
public short feed_ovrd; /* feedrate override signal */
public short spdl_ovrd; /* (not used) */
public short blck_del; /* optional block skip signal */
public short sngl_blck; /* single block signal */
public short machn_lock; /* machine lock signal */
public short dry_run; /* dry run signal */
public short mem_prtct; /* memory protection signal */
public short feed_hold; /* automatic operation halt signal */
}
#endif
/* cnc_rdopnlgnrl:read general signal image of software operator's panel */
/* cnc_wropnlgnrl:write general signal image of software operator's panel */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBGNRL
{
public short datano; /* dummy */
public short type; /* data select flag */
public byte sgnal; /* general signal */
}
/* cnc_rdopnlgsname:read general signal name of software operator's panel */
/* cnc_wropnlgsname:write general signal name of software operator's panel*/
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class IODBRDNA
{
public short datano; /* dummy */
public short type; /* data select flag */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 9)]
public string sgnl1_name = new string(' ', 9); /* general signal 1 name */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 9)]
public string sgnl2_name = new string(' ', 9); /* general signal 2 name */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 9)]
public string sgnl3_name = new string(' ', 9); /* general signal 3 name */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 9)]
public string sgnl4_name = new string(' ', 9); /* general signal 4 name */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 9)]
public string sgnl5_name = new string(' ', 9); /* general signal 5 name */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 9)]
public string sgnl6_name = new string(' ', 9); /* general signal 6 name */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 9)]
public string sgnl7_name = new string(' ', 9); /* general signal 7 name */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 9)]
public string sgnl8_name = new string(' ', 9); /* general signal 8 name */
}
/* cnc_getdtailerr:get detail error */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBERR
{
public short err_no;
public short err_dtno;
}
/* cnc_rdparainfo:read informations of CNC parameter */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBPARAIF_info
{
public short prm_no;
public short prm_type;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBPARAIF1
{
public ODBPARAIF_info info1 = new ODBPARAIF_info();
public ODBPARAIF_info info2 = new ODBPARAIF_info();
public ODBPARAIF_info info3 = new ODBPARAIF_info();
public ODBPARAIF_info info4 = new ODBPARAIF_info();
public ODBPARAIF_info info5 = new ODBPARAIF_info();
public ODBPARAIF_info info6 = new ODBPARAIF_info();
public ODBPARAIF_info info7 = new ODBPARAIF_info();
public ODBPARAIF_info info8 = new ODBPARAIF_info();
public ODBPARAIF_info info9 = new ODBPARAIF_info();
public ODBPARAIF_info info10 = new ODBPARAIF_info();
} /* In case that the number of data is 10 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBPARAIF
{
public ushort info_no;
public short prev_no;
public short next_no;
public ODBPARAIF1 info = new ODBPARAIF1();
}
/* cnc_rdsetinfo:read informations of CNC setting data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSETIF_info
{
public short set_no;
public short set_type;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSETIF1
{
public ODBSETIF_info info1 = new ODBSETIF_info();
public ODBSETIF_info info2 = new ODBSETIF_info();
public ODBSETIF_info info3 = new ODBSETIF_info();
public ODBSETIF_info info4 = new ODBSETIF_info();
public ODBSETIF_info info5 = new ODBSETIF_info();
public ODBSETIF_info info6 = new ODBSETIF_info();
public ODBSETIF_info info7 = new ODBSETIF_info();
public ODBSETIF_info info8 = new ODBSETIF_info();
public ODBSETIF_info info9 = new ODBSETIF_info();
public ODBSETIF_info info10 = new ODBSETIF_info();
} /* In case that the number of data is 10 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSETIF
{
public ushort info_no;
public short prev_no;
public short next_no;
public ODBSETIF1 info = new ODBSETIF1();
}
/* cnc_rddiaginfo:read informations of CNC diagnose data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBDIAGIF_info
{
public short diag_no;
public short diag_type;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBDIAGIF1
{
public ODBDIAGIF_info info1 = new ODBDIAGIF_info();
public ODBDIAGIF_info info2 = new ODBDIAGIF_info();
public ODBDIAGIF_info info3 = new ODBDIAGIF_info();
public ODBDIAGIF_info info4 = new ODBDIAGIF_info();
public ODBDIAGIF_info info5 = new ODBDIAGIF_info();
public ODBDIAGIF_info info6 = new ODBDIAGIF_info();
public ODBDIAGIF_info info7 = new ODBDIAGIF_info();
public ODBDIAGIF_info info8 = new ODBDIAGIF_info();
public ODBDIAGIF_info info9 = new ODBDIAGIF_info();
public ODBDIAGIF_info info10 = new ODBDIAGIF_info();
} /* In case that the number of data is 10 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBDIAGIF
{
public ushort info_no;
public short prev_no;
public short next_no;
public ODBDIAGIF1 info = new ODBDIAGIF1();
}
/* cnc_rdparanum:read maximum, minimum and total number of CNC parameter */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBPARANUM
{
public ushort para_min;
public ushort para_max;
public ushort total_no;
}
/* cnc_rdsetnum:read maximum, minimum and total number of CNC setting data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSETNUM
{
public ushort set_min;
public ushort set_max;
public ushort total_no;
}
/* cnc_rddiagnum:read maximum, minimum and total number of CNC diagnose data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBDIAGNUM
{
public ushort diag_min;
public ushort diag_max;
public ushort total_no;
}
/* cnc_rdfrominfo:read F-ROM information on CNC */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ODBFINFO_info
{
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 12)]
public string sysname = new string(' ', 12); /* F-ROM SYSTEM data Name */
public int fromsize; /* F-ROM Size */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBFINFO1
{
public ODBFINFO_info info1 = new ODBFINFO_info();
public ODBFINFO_info info2 = new ODBFINFO_info();
public ODBFINFO_info info3 = new ODBFINFO_info();
public ODBFINFO_info info4 = new ODBFINFO_info();
public ODBFINFO_info info5 = new ODBFINFO_info();
public ODBFINFO_info info6 = new ODBFINFO_info();
public ODBFINFO_info info7 = new ODBFINFO_info();
public ODBFINFO_info info8 = new ODBFINFO_info();
public ODBFINFO_info info9 = new ODBFINFO_info();
public ODBFINFO_info info10 = new ODBFINFO_info();
public ODBFINFO_info info11 = new ODBFINFO_info();
public ODBFINFO_info info12 = new ODBFINFO_info();
public ODBFINFO_info info13 = new ODBFINFO_info();
public ODBFINFO_info info14 = new ODBFINFO_info();
public ODBFINFO_info info15 = new ODBFINFO_info();
public ODBFINFO_info info16 = new ODBFINFO_info();
public ODBFINFO_info info17 = new ODBFINFO_info();
public ODBFINFO_info info18 = new ODBFINFO_info();
public ODBFINFO_info info19 = new ODBFINFO_info();
public ODBFINFO_info info20 = new ODBFINFO_info();
public ODBFINFO_info info21 = new ODBFINFO_info();
public ODBFINFO_info info22 = new ODBFINFO_info();
public ODBFINFO_info info23 = new ODBFINFO_info();
public ODBFINFO_info info24 = new ODBFINFO_info();
public ODBFINFO_info info25 = new ODBFINFO_info();
public ODBFINFO_info info26 = new ODBFINFO_info();
public ODBFINFO_info info27 = new ODBFINFO_info();
public ODBFINFO_info info28 = new ODBFINFO_info();
public ODBFINFO_info info29 = new ODBFINFO_info();
public ODBFINFO_info info30 = new ODBFINFO_info();
public ODBFINFO_info info31 = new ODBFINFO_info();
public ODBFINFO_info info32 = new ODBFINFO_info();
}
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ODBFINFO
{
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 12)]
public string slotname = new string(' ', 12); /* Slot Name */
public int fromnum; /* Number of F-ROM SYSTEM data */
public ODBFINFO1 info = new ODBFINFO1();
}
/* cnc_getfrominfo:read F-ROM information on CNC */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ODBFINFORM_info
{
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 12)]
public string sysname = new string(' ', 12); /* F-ROM SYSTEM data Name */
public int fromsize; /* F-ROM Size */
public int fromattrib; /* F-ROM data attribute */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBFINFORM1
{
public ODBFINFORM_info info1 = new ODBFINFORM_info();
public ODBFINFORM_info info2 = new ODBFINFORM_info();
public ODBFINFORM_info info3 = new ODBFINFORM_info();
public ODBFINFORM_info info4 = new ODBFINFORM_info();
public ODBFINFORM_info info5 = new ODBFINFORM_info();
public ODBFINFORM_info info6 = new ODBFINFORM_info();
public ODBFINFORM_info info7 = new ODBFINFORM_info();
public ODBFINFORM_info info8 = new ODBFINFORM_info();
public ODBFINFORM_info info9 = new ODBFINFORM_info();
public ODBFINFORM_info info10 = new ODBFINFORM_info();
public ODBFINFORM_info info11 = new ODBFINFORM_info();
public ODBFINFORM_info info12 = new ODBFINFORM_info();
public ODBFINFORM_info info13 = new ODBFINFORM_info();
public ODBFINFORM_info info14 = new ODBFINFORM_info();
public ODBFINFORM_info info15 = new ODBFINFORM_info();
public ODBFINFORM_info info16 = new ODBFINFORM_info();
public ODBFINFORM_info info17 = new ODBFINFORM_info();
public ODBFINFORM_info info18 = new ODBFINFORM_info();
public ODBFINFORM_info info19 = new ODBFINFORM_info();
public ODBFINFORM_info info20 = new ODBFINFORM_info();
public ODBFINFORM_info info21 = new ODBFINFORM_info();
public ODBFINFORM_info info22 = new ODBFINFORM_info();
public ODBFINFORM_info info23 = new ODBFINFORM_info();
public ODBFINFORM_info info24 = new ODBFINFORM_info();
public ODBFINFORM_info info25 = new ODBFINFORM_info();
public ODBFINFORM_info info26 = new ODBFINFORM_info();
public ODBFINFORM_info info27 = new ODBFINFORM_info();
public ODBFINFORM_info info28 = new ODBFINFORM_info();
public ODBFINFORM_info info29 = new ODBFINFORM_info();
public ODBFINFORM_info info30 = new ODBFINFORM_info();
public ODBFINFORM_info info31 = new ODBFINFORM_info();
public ODBFINFORM_info info32 = new ODBFINFORM_info();
}
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ODBFINFORM
{
public int slotno; /* Slot Number */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 12)]
public string slotname = new string(' ', 12); /* Slot Name */
public int fromnum; /* Number of F-ROM SYSTEM data */
public ODBFINFORM1 info = new ODBFINFORM1();
}
/* cnc_rdsraminfo:read S-RAM information on CNC */
/* cnc_getsraminfo:read S-RAM information on CNC */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ODBSINFO_info
{
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 12)]
public string sramname = new string(' ', 12); /* S-RAM data Name */
public int sramsize; /* S-RAM data Size */
public short divnumber; /* Division number of S-RAM file */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 16)]
public string fname1 = new string(' ', 16); /* S-RAM data Name1 */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 16)]
public string fname2 = new string(' ', 16); /* S-RAM data Name2 */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 16)]
public string fname3 = new string(' ', 16); /* S-RAM data Name3 */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 16)]
public string fname4 = new string(' ', 16); /* S-RAM data Name4 */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 16)]
public string fname5 = new string(' ', 16); /* S-RAM data Name5 */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 16)]
public string fname6 = new string(' ', 16); /* S-RAM data Name6 */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSINFO1
{
public ODBSINFO_info info1 = new ODBSINFO_info();
public ODBSINFO_info info2 = new ODBSINFO_info();
public ODBSINFO_info info3 = new ODBSINFO_info();
public ODBSINFO_info info4 = new ODBSINFO_info();
public ODBSINFO_info info5 = new ODBSINFO_info();
public ODBSINFO_info info6 = new ODBSINFO_info();
public ODBSINFO_info info7 = new ODBSINFO_info();
public ODBSINFO_info info8 = new ODBSINFO_info();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSINFO
{
public int sramnum; /* Number of S-RAM data */
public ODBSINFO1 info = new ODBSINFO1();
}
/* cnc_rdsramaddr:read S-RAM address on CNC */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class SRAMADDR
{
public short type; /* SRAM data type */
public int size; /* SRAM data size */
public int offset; /* offset from top address of SRAM */
}
/* cnc_dtsvrdpgdir:read file directory in Data Server */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ODBDSDIR_data
{
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 16)]
public string file_name = new string(' ', 16);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 64)]
public string comment = new string(' ', 64);
public int size;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 16)]
public string date = new string(' ', 16);
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBDSDIR1
{
public ODBDSDIR_data data1 = new ODBDSDIR_data();
public ODBDSDIR_data data2 = new ODBDSDIR_data();
public ODBDSDIR_data data3 = new ODBDSDIR_data();
public ODBDSDIR_data data4 = new ODBDSDIR_data();
public ODBDSDIR_data data5 = new ODBDSDIR_data();
public ODBDSDIR_data data6 = new ODBDSDIR_data();
public ODBDSDIR_data data7 = new ODBDSDIR_data();
public ODBDSDIR_data data8 = new ODBDSDIR_data();
public ODBDSDIR_data data9 = new ODBDSDIR_data();
public ODBDSDIR_data data10 = new ODBDSDIR_data();
public ODBDSDIR_data data11 = new ODBDSDIR_data();
public ODBDSDIR_data data12 = new ODBDSDIR_data();
public ODBDSDIR_data data13 = new ODBDSDIR_data();
public ODBDSDIR_data data14 = new ODBDSDIR_data();
public ODBDSDIR_data data15 = new ODBDSDIR_data();
public ODBDSDIR_data data16 = new ODBDSDIR_data();
public ODBDSDIR_data data17 = new ODBDSDIR_data();
public ODBDSDIR_data data18 = new ODBDSDIR_data();
public ODBDSDIR_data data19 = new ODBDSDIR_data();
public ODBDSDIR_data data20 = new ODBDSDIR_data();
public ODBDSDIR_data data21 = new ODBDSDIR_data();
public ODBDSDIR_data data22 = new ODBDSDIR_data();
public ODBDSDIR_data data23 = new ODBDSDIR_data();
public ODBDSDIR_data data24 = new ODBDSDIR_data();
public ODBDSDIR_data data25 = new ODBDSDIR_data();
public ODBDSDIR_data data26 = new ODBDSDIR_data();
public ODBDSDIR_data data27 = new ODBDSDIR_data();
public ODBDSDIR_data data28 = new ODBDSDIR_data();
public ODBDSDIR_data data29 = new ODBDSDIR_data();
public ODBDSDIR_data data30 = new ODBDSDIR_data();
public ODBDSDIR_data data31 = new ODBDSDIR_data();
public ODBDSDIR_data data32 = new ODBDSDIR_data();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBDSDIR
{
public int file_num;
public int remainder;
public short data_num;
public ODBDSDIR1 data = new ODBDSDIR1();
}
/* cnc_dtsvrdset:read setting data for Data Server */
/* cnc_dtsvwrset:write setting data for Data Server */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class IODBDSSET
{
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 16)]
public string host_ip = new string(' ', 16);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 32)]
public string host_uname = new string(' ', 32);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 32)]
public string host_passwd = new string(' ', 32);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 128)]
public string host_dir = new string(' ', 128);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 13)]
public string dtsv_mac = new string(' ', 13);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 16)]
public string dtsv_ip = new string(' ', 16);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 16)]
public string dtsv_mask = new string(' ', 16);
}
/* cnc_dtsvmntinfo:read maintenance information for Data Server */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBDSMNT
{
public int empty_cnt;
public int total_size;
public int read_ptr;
public int write_ptr;
}
/* cnc_rdposerrs2:read the position deviation S1 and S2 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBPSER
{
public int poserr1;
public int poserr2;
}
/* cnc_rdctrldi:read the control input signal */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSPDI_data
{
public byte sgnl1;
public byte sgnl2;
public byte sgnl3;
public byte sgnl4;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSPDI
{
public ODBSPDI_data di1 = new ODBSPDI_data();
public ODBSPDI_data di2 = new ODBSPDI_data();
public ODBSPDI_data di3 = new ODBSPDI_data();
public ODBSPDI_data di4 = new ODBSPDI_data();
}
/* cnc_rdctrldo:read the control output signal */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSPDO_data
{
public byte sgnl1;
public byte sgnl2;
public byte sgnl3;
public byte sgnl4;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSPDO
{
public ODBSPDO_data do1 = new ODBSPDO_data();
public ODBSPDO_data do2 = new ODBSPDO_data();
public ODBSPDO_data do3 = new ODBSPDO_data();
public ODBSPDO_data do4 = new ODBSPDO_data();
}
/* cnc_rdwaveprm:read the parameter of wave diagnosis */
/* cnc_wrwaveprm:write the parameter of wave diagnosis */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBWAVE_io
{
public byte adr;
public byte bit;
public short no;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBWAVE_axis
{
public short axis;
}
[StructLayout(LayoutKind.Explicit)]
public class IODBWAVE_u
{
[FieldOffset(0)]
public IODBWAVE_io io = new IODBWAVE_io();
[FieldOffset(0)]
public IODBWAVE_axis axis = new IODBWAVE_axis();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBWAVE_ch_data
{
public short kind;
public IODBWAVE_u u = new IODBWAVE_u();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBWAVE_ch
{
public IODBWAVE_ch_data ch1 = new IODBWAVE_ch_data();
public IODBWAVE_ch_data ch2 = new IODBWAVE_ch_data();
public IODBWAVE_ch_data ch3 = new IODBWAVE_ch_data();
public IODBWAVE_ch_data ch4 = new IODBWAVE_ch_data();
public IODBWAVE_ch_data ch5 = new IODBWAVE_ch_data();
public IODBWAVE_ch_data ch6 = new IODBWAVE_ch_data();
public IODBWAVE_ch_data ch7 = new IODBWAVE_ch_data();
public IODBWAVE_ch_data ch8 = new IODBWAVE_ch_data();
public IODBWAVE_ch_data ch9 = new IODBWAVE_ch_data();
public IODBWAVE_ch_data ch10 = new IODBWAVE_ch_data();
public IODBWAVE_ch_data ch11 = new IODBWAVE_ch_data();
public IODBWAVE_ch_data ch12 = new IODBWAVE_ch_data();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBWAVE
{
public short condition;
public char trg_adr;
public byte trg_bit;
public short trg_no;
public short delay;
public short t_range;
public IODBWAVE_ch ch = new IODBWAVE_ch();
}
/* cnc_rdwaveprm2:read the parameter of wave diagnosis 2 */
/* cnc_wrwaveprm2:write the parameter of wave diagnosis 2 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBWVPRM_io
{
public byte adr;
public byte bit;
public short no;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBWVPRM_axis
{
public short axis;
}
[StructLayout(LayoutKind.Explicit)]
public class IODBWVPRM_u
{
[FieldOffset(0)]
public IODBWVPRM_io io = new IODBWVPRM_io();
[FieldOffset(0)]
public IODBWVPRM_axis axis = new IODBWVPRM_axis();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBWVPRM_ch_data
{
public short kind;
public IODBWVPRM_u u = new IODBWVPRM_u();
public int reserve2;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBWVPRM_ch
{
public IODBWVPRM_ch_data ch1 = new IODBWVPRM_ch_data();
public IODBWVPRM_ch_data ch2 = new IODBWVPRM_ch_data();
public IODBWVPRM_ch_data ch3 = new IODBWVPRM_ch_data();
public IODBWVPRM_ch_data ch4 = new IODBWVPRM_ch_data();
public IODBWVPRM_ch_data ch5 = new IODBWVPRM_ch_data();
public IODBWVPRM_ch_data ch6 = new IODBWVPRM_ch_data();
public IODBWVPRM_ch_data ch7 = new IODBWVPRM_ch_data();
public IODBWVPRM_ch_data ch8 = new IODBWVPRM_ch_data();
public IODBWVPRM_ch_data ch9 = new IODBWVPRM_ch_data();
public IODBWVPRM_ch_data ch10 = new IODBWVPRM_ch_data();
public IODBWVPRM_ch_data ch11 = new IODBWVPRM_ch_data();
public IODBWVPRM_ch_data ch12 = new IODBWVPRM_ch_data();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBWVPRM
{
public short condition;
public byte trg_adr;
public byte trg_bit;
public short trg_no;
public short reserve1;
public int delay;
public int t_range;
public IODBWVPRM_ch ch = new IODBWVPRM_ch();
}
/* cnc_rdwavedata:read the data of wave diagnosis */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBWVDT_io
{
public byte adr;
public byte bit;
public short no;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBWVDT_axis
{
public short axis;
}
[StructLayout(LayoutKind.Explicit)]
public class ODBWVDT_u
{
[FieldOffset(0)]
public ODBWVDT_io io = new ODBWVDT_io();
[FieldOffset(0)]
public ODBWVDT_axis axis = new ODBWVDT_axis();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBWVDT
{
public short channel;
public short kind;
public ODBWVDT_u u = new ODBWVDT_u();
public byte year;
public byte month;
public byte day;
public byte hour;
public byte minute;
public byte second;
public short t_cycle;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 8192)]
public short[] data;
}
/* cnc_rdrmtwaveprm:read the parameter of wave diagnosis for remort diagnosis */
/* cnc_wrrmtwaveprm:write the parameter of wave diagnosis for remort diagnosis */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBRMTPRM_alm
{
public short no;
public sbyte axis;
public byte type;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBRMTPRM_io
{
public char adr;
public byte bit;
public short no;
}
[StructLayout(LayoutKind.Explicit)]
public class IODBRMTPRM_trg
{
[FieldOffset(0)]
public IODBRMTPRM_alm alm = new IODBRMTPRM_alm();
[FieldOffset(0)]
public IODBRMTPRM_io io = new IODBRMTPRM_io();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBRMTPRM_smpl
{
public char adr;
public byte bit;
public short no;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBRMTPRM1
{
public IODBRMTPRM_smpl ampl1 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl2 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl3 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl4 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl5 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl6 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl7 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl8 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl9 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl10 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl11 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl12 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl13 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl14 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl15 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl16 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl17 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl18 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl19 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl20 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl21 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl22 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl23 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl24 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl25 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl26 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl27 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl28 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl29 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl30 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl31 = new IODBRMTPRM_smpl();
public IODBRMTPRM_smpl ampl32 = new IODBRMTPRM_smpl();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBRMTPRM
{
public short condition;
public short reserve;
public IODBRMTPRM_trg trg = new IODBRMTPRM_trg();
public int delay;
public short wv_intrvl;
public short io_intrvl;
public short kind1;
public short kind2;
public IODBRMTPRM1 ampl = new IODBRMTPRM1();
}
/* cnc_rdrmtwavedt:read the data of wave diagnosis for remort diagnosis */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBRMTDT
{
public short channel;
public short kind;
public byte year;
public byte month;
public byte day;
public byte hour;
public byte minute;
public byte second;
public short t_intrvl;
public short trg_data;
public int ins_ptr;
public short t_delta;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 1917)]
public short[] data;
}
/* cnc_rdsavsigadr:read of address for PMC signal batch save */
/* cnc_wrsavsigadr:write of address for PMC signal batch save */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBSIGAD
{
public byte adr;
public byte reserve;
public short no;
public short size;
}
/* cnc_rdmgrpdata:read M-code group data */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ODBMGRP_data
{
public int m_code;
public short grp_no;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 21)]
public string m_name = new string(' ', 21);
public byte dummy;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBMGRP
{
public ODBMGRP_data mgrp1 = new ODBMGRP_data();
public ODBMGRP_data mgrp2 = new ODBMGRP_data();
public ODBMGRP_data mgrp3 = new ODBMGRP_data();
public ODBMGRP_data mgrp4 = new ODBMGRP_data();
public ODBMGRP_data mgrp5 = new ODBMGRP_data();
public ODBMGRP_data mgrp6 = new ODBMGRP_data();
public ODBMGRP_data mgrp7 = new ODBMGRP_data();
public ODBMGRP_data mgrp8 = new ODBMGRP_data();
public ODBMGRP_data mgrp9 = new ODBMGRP_data();
public ODBMGRP_data mgrp10 = new ODBMGRP_data();
}
/* cnc_wrmgrpdata:write M-code group data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IDBMGRP
{
public short s_no;
public short dummy;
public short num;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 500)]
public short[] group = new short[500];
}
/* cnc_rdexecmcode:read executing M-code group data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBEXEM_data
{
public int no;
public short flag;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBEXEM1
{
public ODBEXEM_data m_code1 = new ODBEXEM_data();
public ODBEXEM_data m_code2 = new ODBEXEM_data();
public ODBEXEM_data m_code3 = new ODBEXEM_data();
public ODBEXEM_data m_code4 = new ODBEXEM_data();
public ODBEXEM_data m_code5 = new ODBEXEM_data();
}
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ODBEXEM
{
public short grp_no;
public short mem_no;
public ODBEXEM1 m_code = new ODBEXEM1();
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 21)]
public string m_name = new string(' ', 21);
public byte dummy;
}
/* cnc_rdrstrmcode:read program restart M-code group data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class M_CODE_data
{
public int no;
public short flag;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class M_CODE1
{
public M_CODE_data m_code1 = new M_CODE_data();
public M_CODE_data m_code2 = new M_CODE_data();
public M_CODE_data m_code3 = new M_CODE_data();
public M_CODE_data m_code4 = new M_CODE_data();
public M_CODE_data m_code5 = new M_CODE_data();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBRSTRM
{
public short grp_no;
public short mem_no;
public M_CODE1 m_code = new M_CODE1();
}
/* cnc_rdproctime:read processing time stamp data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBPTIME_data
{
public int prg_no;
public short hour;
public byte minute;
public byte second;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBPTIME1
{
public ODBPTIME_data data1 = new ODBPTIME_data();
public ODBPTIME_data data2 = new ODBPTIME_data();
public ODBPTIME_data data3 = new ODBPTIME_data();
public ODBPTIME_data data4 = new ODBPTIME_data();
public ODBPTIME_data data5 = new ODBPTIME_data();
public ODBPTIME_data data6 = new ODBPTIME_data();
public ODBPTIME_data data7 = new ODBPTIME_data();
public ODBPTIME_data data8 = new ODBPTIME_data();
public ODBPTIME_data data9 = new ODBPTIME_data();
public ODBPTIME_data data10 = new ODBPTIME_data();
} /* In case that the number of data is 10 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBPTIME
{
public short num;
public ODBPTIME1 data = new ODBPTIME1();
}
/* cnc_rdprgdirtime:read program directory for processing time data */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class PRGDIRTM_data
{
public int prg_no;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 51)]
public string comment = new string(' ', 51);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 13)]
public string cuttime = new string(' ', 13);
}
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class PRGDIRTM
{
public PRGDIRTM_data data1 = new PRGDIRTM_data();
public PRGDIRTM_data data2 = new PRGDIRTM_data();
public PRGDIRTM_data data3 = new PRGDIRTM_data();
public PRGDIRTM_data data4 = new PRGDIRTM_data();
public PRGDIRTM_data data5 = new PRGDIRTM_data();
public PRGDIRTM_data data6 = new PRGDIRTM_data();
public PRGDIRTM_data data7 = new PRGDIRTM_data();
public PRGDIRTM_data data8 = new PRGDIRTM_data();
public PRGDIRTM_data data9 = new PRGDIRTM_data();
public PRGDIRTM_data data10 = new PRGDIRTM_data();
} /* In case that the number of data is 10 */
/* cnc_rdprogdir2:read program directory 2 */
#if (!ONO8D)
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class PRGDIR2_data
{
public short number;
public int length;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 51)]
public string comment = new string(' ', 51);
public byte dummy;
}
#else
[StructLayout(LayoutKind.Sequential,CharSet=CharSet.Ansi,Pack=4)]
public class PRGDIR2_data
{
public int number ;
public int length ;
[MarshalAs(UnmanagedType.ByValTStr,SizeConst=51)]
public string comment= new string(' ',51) ;
public byte dummy ;
}
#endif
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class PRGDIR2
{
public PRGDIR2_data dir1 = new PRGDIR2_data();
public PRGDIR2_data dir2 = new PRGDIR2_data();
public PRGDIR2_data dir3 = new PRGDIR2_data();
public PRGDIR2_data dir4 = new PRGDIR2_data();
public PRGDIR2_data dir5 = new PRGDIR2_data();
public PRGDIR2_data dir6 = new PRGDIR2_data();
public PRGDIR2_data dir7 = new PRGDIR2_data();
public PRGDIR2_data dir8 = new PRGDIR2_data();
public PRGDIR2_data dir9 = new PRGDIR2_data();
public PRGDIR2_data dir10 = new PRGDIR2_data();
} /* In case that the number of data is 10 */
/* cnc_rdprogdir3:read program directory 3 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class DIR3_MDATE
{
public short year;
public short month;
public short day;
public short hour;
public short minute;
public short dummy;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class DIR3_CDATE
{
public short year;
public short month;
public short day;
public short hour;
public short minute;
public short dummy;
}
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class PRGDIR3_data
{
public int number;
public int length;
public int page;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 52)]
public string comment = new string(' ', 52);
public DIR3_MDATE mdate = new DIR3_MDATE();
public DIR3_CDATE cdate = new DIR3_CDATE();
}
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class PRGDIR3
{
public PRGDIR3_data dir1 = new PRGDIR3_data();
public PRGDIR3_data dir2 = new PRGDIR3_data();
public PRGDIR3_data dir3 = new PRGDIR3_data();
public PRGDIR3_data dir4 = new PRGDIR3_data();
public PRGDIR3_data dir5 = new PRGDIR3_data();
public PRGDIR3_data dir6 = new PRGDIR3_data();
public PRGDIR3_data dir7 = new PRGDIR3_data();
public PRGDIR3_data dir8 = new PRGDIR3_data();
public PRGDIR3_data dir9 = new PRGDIR3_data();
public PRGDIR3_data dir10 = new PRGDIR3_data();
} /* In case that the number of data is 10 */
/* cnc_rdprogdir4:read program directory 4 */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class DIR4_MDATE
{
public short year;
public short month;
public short day;
public short hour;
public short minute;
public short dummy;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class DIR4_CDATE
{
public short year;
public short month;
public short day;
public short hour;
public short minute;
public short dummy;
}
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class PRGDIR4_data
{
public int number;
public int length;
public int page;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 52)]
public string comment = new string(' ', 52);
public DIR4_MDATE mdate = new DIR4_MDATE();
public DIR4_CDATE cdate = new DIR4_CDATE();
}
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class PRGDIR4
{
public PRGDIR4_data dir1 = new PRGDIR4_data();
public PRGDIR4_data dir2 = new PRGDIR4_data();
public PRGDIR4_data dir3 = new PRGDIR4_data();
public PRGDIR4_data dir4 = new PRGDIR4_data();
public PRGDIR4_data dir5 = new PRGDIR4_data();
public PRGDIR4_data dir6 = new PRGDIR4_data();
public PRGDIR4_data dir7 = new PRGDIR4_data();
public PRGDIR4_data dir8 = new PRGDIR4_data();
public PRGDIR4_data dir9 = new PRGDIR4_data();
public PRGDIR4_data dir10 = new PRGDIR4_data();
} /* In case that the number of data is 10 */
/* cnc_rdcomparam:read communication parameter for DNC1, DNC2, OSI-Ethernet */
/* cnc_wrcomparam:write communication parameter for DNC1, DNC2, OSI-Ethernet */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class IODBCPRM
{
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 65)]
public string NcApli = new string(' ', 65);
public byte Dummy1;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 65)]
public string HostApli = new string(' ', 65);
public byte Dummy2;
public uint StatPstv;
public uint StatNgtv;
public uint Statmask;
public uint AlarmStat;
public uint PsclHaddr;
public uint PsclLaddr;
public ushort SvcMode1;
public ushort SvcMode2;
public int FileTout;
public int RemTout;
}
/* cnc_rdintchk:read interference check */
/* cnc_wrintchk:write interference check */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBINT
{
public short datano_s; /* start offset No. */
public short type; /* kind of position */
public short datano_e; /* end offset No. */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 8 * 3)]
public int[] data = new int[8 * 3]; /* position value of area for not attach */
}
/* cnc_rdwkcdshft:read work coordinate shift */
/* cnc_wrwkcdshft:write work coordinate shift */
/* cnc_rdwkcdsfms:read work coordinate shift measure */
/* cnc_wrwkcdsfms:write work coordinate shift measure */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBWCSF
{
public short datano; /* datano */
public short type; /* axis number */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] data = new int[MAX_AXIS]; /* data */
}
/* cnc_rdomhisinfo:read operator message history information */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBOMIF
{
public ushort om_max; /* maximum operator message history */
public ushort om_sum; /* actually operator message history */
public ushort om_char; /* maximum character (include NULL) */
}
/* cnc_rdomhistry:read operator message history */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ODBOMHIS_data
{
public short om_no; /* operator message number */
public short year; /* year */
public short month; /* month */
public short day; /* day */
public short hour; /* hour */
public short minute; /* mimute */
public short second; /* second */
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 256)]
public string om_msg = new string(' ', 256);
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBOMHIS
{
public ODBOMHIS_data omhis1 = new ODBOMHIS_data();
public ODBOMHIS_data omhis2 = new ODBOMHIS_data();
public ODBOMHIS_data omhis3 = new ODBOMHIS_data();
public ODBOMHIS_data omhis4 = new ODBOMHIS_data();
public ODBOMHIS_data omhis5 = new ODBOMHIS_data();
public ODBOMHIS_data omhis6 = new ODBOMHIS_data();
public ODBOMHIS_data omhis7 = new ODBOMHIS_data();
public ODBOMHIS_data omhis8 = new ODBOMHIS_data();
public ODBOMHIS_data omhis9 = new ODBOMHIS_data();
public ODBOMHIS_data omhis10 = new ODBOMHIS_data();
} /* In case that the number of data is 10 */
/* cnc_rdbtofsr:read b-axis tool offset value(area specified) */
/* cnc_wrbtofsr:write b-axis tool offset value(area specified) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBBTO
{
public short datano_s; /* start offset number */
public short type; /* offset type */
public short datano_e; /* end offset number */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 18)]
public int[] ofs = new int[18]; /* offset */
} /* In case that the number of data is 9 (B type) */
/* cnc_rdbtofsinfo:read b-axis tool offset information */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBBTLINF
{
public short ofs_type; /* memory type */
public short use_no; /* sum of b-axis offset */
public short sub_no; /* sub function number of offset cancel */
}
/* cnc_rdbaxis:read b-axis command */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBBAXIS
{
public short flag; /* b-axis command exist or not */
public short command; /* b-axis command */
public ushort speed; /* b-axis speed */
public int sub_data; /* b-axis sub data */
}
/* cnc_rdsyssoft:read CNC system soft series and version */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ODBSYSS
{
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 16)]
public byte[] slot_no_p;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 16)]
public byte[] slot_no_l;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 16)]
public short[] module_id;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 16)]
public short[] soft_id;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series1 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series2 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series3 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series4 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series5 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series6 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series7 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series8 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series9 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series10 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series11 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series12 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series13 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series14 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series15 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series16 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version1 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version2 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version3 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version4 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version5 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version6 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version7 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version8 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version9 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version10 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version11 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version12 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version13 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version14 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version15 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version16 = new string(' ', 5);
public short soft_inst;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string boot_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string boot_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string servo_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string servo_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmc_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmc_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string ladder_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string ladder_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string mcrlib_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string mcrlib_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string mcrapl_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string mcrapl_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string spl1_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string spl1_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string spl2_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string spl2_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string spl3_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string spl3_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string c_exelib_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string c_exelib_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string c_exeapl_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string c_exeapl_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string int_vga_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string int_vga_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string out_vga_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string out_vga_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmm_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmm_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmc_mng_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmc_mng_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmc_shin_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmc_shin_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmc_shout_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmc_shout_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmc_c_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmc_c_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmc_edit_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmc_edit_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string lddr_mng_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string lddr_mng_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string lddr_apl_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string lddr_apl_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string spl4_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string spl4_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string mcr2_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string mcr2_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string mcr3_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string mcr3_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string eth_boot_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string eth_boot_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 8 * 5)]
public byte[] reserve;
}
/* cnc_rdsyssoft2:read CNC system soft series and version (2) */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ODBSYSS2
{
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 16)]
public byte[] slot_no_p;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 16)]
public byte[] slot_no_l;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 16)]
public short[] module_id;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 16)]
public short[] soft_id;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series1 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series2 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series3 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series4 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series5 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series6 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series7 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series8 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series9 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series10 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series11 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series12 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series13 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series14 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series15 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_series16 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version1 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version2 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version3 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version4 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version5 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version6 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version7 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version8 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version9 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version10 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version11 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version12 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version13 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version14 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version15 = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string soft_version16 = new string(' ', 5);
public short soft_inst;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string boot_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string boot_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string servo_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string servo_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmc_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmc_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string ladder_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string ladder_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string mcrlib_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string mcrlib_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string mcrapl_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string mcrapl_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string spl1_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string spl1_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string spl2_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string spl2_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string spl3_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string spl3_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string c_exelib_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string c_exelib_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string c_exeapl_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string c_exeapl_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string int_vga_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string int_vga_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string out_vga_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string out_vga_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmm_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmm_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmc_mng_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmc_mng_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmc_shin_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmc_shin_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmc_shout_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmc_shout_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmc_c_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmc_c_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmc_edit_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string pmc_edit_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string lddr_mng_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string lddr_mng_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string lddr_apl_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string lddr_apl_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string spl4_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string spl4_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string mcr2_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string mcr2_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string mcr3_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string mcr3_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string eth_boot_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string eth_boot_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 8 * 5)]
public byte[] reserve;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string embEthe_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string embEthe_ver = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 38 * 5)]
public byte[] reserve2;
}
/* cnc_rdsyssoft3:read CNC system soft series and version (3) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSYSS3_data
{
public short soft_id;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 5)]
public char[] soft_series;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 5)]
public char[] soft_edition;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSYSS3
{
public ODBSYSS3_data p1 = new ODBSYSS3_data();
public ODBSYSS3_data p2 = new ODBSYSS3_data();
public ODBSYSS3_data p3 = new ODBSYSS3_data();
public ODBSYSS3_data p4 = new ODBSYSS3_data();
public ODBSYSS3_data p5 = new ODBSYSS3_data();
public ODBSYSS3_data p6 = new ODBSYSS3_data();
public ODBSYSS3_data p7 = new ODBSYSS3_data();
public ODBSYSS3_data p8 = new ODBSYSS3_data();
public ODBSYSS3_data p9 = new ODBSYSS3_data();
public ODBSYSS3_data p10 = new ODBSYSS3_data();
public ODBSYSS3_data p11 = new ODBSYSS3_data();
public ODBSYSS3_data p12 = new ODBSYSS3_data();
public ODBSYSS3_data p13 = new ODBSYSS3_data();
public ODBSYSS3_data p14 = new ODBSYSS3_data();
public ODBSYSS3_data p15 = new ODBSYSS3_data();
public ODBSYSS3_data p16 = new ODBSYSS3_data();
public ODBSYSS3_data p17 = new ODBSYSS3_data();
public ODBSYSS3_data p18 = new ODBSYSS3_data();
public ODBSYSS3_data p19 = new ODBSYSS3_data();
public ODBSYSS3_data p20 = new ODBSYSS3_data();
public ODBSYSS3_data p21 = new ODBSYSS3_data();
public ODBSYSS3_data p22 = new ODBSYSS3_data();
public ODBSYSS3_data p23 = new ODBSYSS3_data();
public ODBSYSS3_data p24 = new ODBSYSS3_data();
public ODBSYSS3_data p25 = new ODBSYSS3_data();
public ODBSYSS3_data p26 = new ODBSYSS3_data();
public ODBSYSS3_data p27 = new ODBSYSS3_data();
public ODBSYSS3_data p28 = new ODBSYSS3_data();
public ODBSYSS3_data p29 = new ODBSYSS3_data();
public ODBSYSS3_data p30 = new ODBSYSS3_data();
public ODBSYSS3_data p31 = new ODBSYSS3_data();
public ODBSYSS3_data p32 = new ODBSYSS3_data();
public ODBSYSS3_data p33 = new ODBSYSS3_data();
public ODBSYSS3_data p34 = new ODBSYSS3_data();
public ODBSYSS3_data p35 = new ODBSYSS3_data();
public ODBSYSS3_data p36 = new ODBSYSS3_data();
public ODBSYSS3_data p37 = new ODBSYSS3_data();
public ODBSYSS3_data p38 = new ODBSYSS3_data();
public ODBSYSS3_data p39 = new ODBSYSS3_data();
public ODBSYSS3_data p40 = new ODBSYSS3_data();
}
/* cnc_rdsyshard:read CNC system hard info */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSYSH_data
{
public uint id1;
public uint id2;
public short group_id;
public short hard_id;
public short hard_num;
public short slot_no;
public short id1_format;
public short id2_format;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSYSH
{
public ODBSYSH_data data1 = new ODBSYSH_data();
public ODBSYSH_data data2 = new ODBSYSH_data();
public ODBSYSH_data data3 = new ODBSYSH_data();
public ODBSYSH_data data4 = new ODBSYSH_data();
public ODBSYSH_data data5 = new ODBSYSH_data();
public ODBSYSH_data data6 = new ODBSYSH_data();
public ODBSYSH_data data7 = new ODBSYSH_data();
public ODBSYSH_data data8 = new ODBSYSH_data();
public ODBSYSH_data data9 = new ODBSYSH_data();
public ODBSYSH_data data10 = new ODBSYSH_data();
public ODBSYSH_data data11 = new ODBSYSH_data();
public ODBSYSH_data data12 = new ODBSYSH_data();
public ODBSYSH_data data13 = new ODBSYSH_data();
public ODBSYSH_data data14 = new ODBSYSH_data();
public ODBSYSH_data data15 = new ODBSYSH_data();
public ODBSYSH_data data16 = new ODBSYSH_data();
public ODBSYSH_data data17 = new ODBSYSH_data();
public ODBSYSH_data data18 = new ODBSYSH_data();
public ODBSYSH_data data19 = new ODBSYSH_data();
public ODBSYSH_data data20 = new ODBSYSH_data();
public ODBSYSH_data data21 = new ODBSYSH_data();
public ODBSYSH_data data22 = new ODBSYSH_data();
public ODBSYSH_data data23 = new ODBSYSH_data();
public ODBSYSH_data data24 = new ODBSYSH_data();
public ODBSYSH_data data25 = new ODBSYSH_data();
}
/* cnc_rdmdlconfig:read CNC module configuration information */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBMDLC
{
public short from;
public short dram;
public short sram;
public short pmc;
public short crtc;
public short servo12;
public short servo34;
public short servo56;
public short servo78;
public short sic;
public short pos_lsi;
public short hi_aio;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 12)]
public short[] reserve;
public short drmmrc;
public short drmarc;
public short pmcmrc;
public short dmaarc;
public short iopt;
public short hdiio;
public short gm2gr1;
public short crtgr2;
public short gm1gr2;
public short gm2gr2;
public short cmmrb;
public short sv5axs;
public short sv7axs;
public short sicaxs;
public short posaxs;
public short hamaxs;
public short romr64;
public short srmr64;
public short dr1r64;
public short dr2r64;
public short iopio2;
public short hdiio2;
public short cmmrb2;
public short romfap;
public short srmfap;
public short drmfap;
public short drmare;
public short pmcmre;
public short dmaare;
public short frmbgg;
public short drmbgg;
public short asrbgg;
public short edtpsc;
public short slcpsc;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 34)]
public short[] reserve2;
}
/* cnc_rdpscdproc:read processing condition file (processing data) */
/* cnc_wrpscdproc:write processing condition file (processing data) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBPSCD_data
{
public short slct;
public int feed;
public short power;
public short freq;
public short duty;
public short g_press;
public short g_kind;
public short g_ready_t;
public short displace;
public int supple;
public short edge_slt;
public short appr_slt;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 5)]
public short[] reserve = new short[5];
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBPSCD
{
public IODBPSCD_data data1 = new IODBPSCD_data();
public IODBPSCD_data data2 = new IODBPSCD_data();
public IODBPSCD_data data3 = new IODBPSCD_data();
public IODBPSCD_data data4 = new IODBPSCD_data();
public IODBPSCD_data data5 = new IODBPSCD_data();
public IODBPSCD_data data6 = new IODBPSCD_data();
public IODBPSCD_data data7 = new IODBPSCD_data();
public IODBPSCD_data data8 = new IODBPSCD_data();
public IODBPSCD_data data9 = new IODBPSCD_data();
public IODBPSCD_data data10 = new IODBPSCD_data();
} /* In case that the number of data is 10 */
/* cnc_rdpscdpirc:read processing condition file (piercing data) */
/* cnc_wrpscdpirc:write processing condition file (piercing data) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBPIRC_data
{
public short slct;
public short power;
public short freq;
public short duty;
public short i_freq;
public short i_duty;
public short step_t;
public short step_sum;
public int pier_t;
public short g_press;
public short g_kind;
public short g_time;
public short def_pos;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 4)]
public short[] reserve = new short[4];
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBPIRC
{
public IODBPIRC_data data1 = new IODBPIRC_data();
public IODBPIRC_data data2 = new IODBPIRC_data();
public IODBPIRC_data data3 = new IODBPIRC_data();
}
/* cnc_rdpscdedge:read processing condition file (edging data) */
/* cnc_wrpscdedge:write processing condition file (edging data) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBEDGE_data
{
public short slct;
public short angle;
public short power;
public short freq;
public short duty;
public int pier_t;
public short g_press;
public short g_kind;
public int r_len;
public short r_feed;
public short r_freq;
public short r_duty;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 5)]
public short[] reserve = new short[5];
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBEDGE
{
public IODBEDGE_data data1 = new IODBEDGE_data();
public IODBEDGE_data data2 = new IODBEDGE_data();
public IODBEDGE_data data3 = new IODBEDGE_data();
public IODBEDGE_data data4 = new IODBEDGE_data();
public IODBEDGE_data data5 = new IODBEDGE_data();
}
/* cnc_rdpscdslop:read processing condition file (slope data) */
/* cnc_wrpscdslop:write processing condition file (slope data) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBSLOP_data
{
public int slct;
public int upleng;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 10)]
public short[] upsp = new short[10];
public int dwleng;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 10)]
public short[] dwsp = new short[10];
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 10)]
public short[] reserve = new short[10];
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBSLOP
{
public IODBSLOP_data data1 = new IODBSLOP_data();
public IODBSLOP_data data2 = new IODBSLOP_data();
public IODBSLOP_data data3 = new IODBSLOP_data();
public IODBSLOP_data data4 = new IODBSLOP_data();
public IODBSLOP_data data5 = new IODBSLOP_data();
}
/* cnc_rdlpwrdty:read power controll duty data */
/* cnc_wrlpwrdty:write power controll duty data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBLPWDT
{
public short slct;
public short dty_const;
public short dty_min;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 6)]
public short[] reserve = new short[6];
}
/* cnc_rdlpwrdat:read laser power data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBLOPDT
{
public short slct;
public short pwr_mon;
public short pwr_ofs;
public short pwr_act;
public int feed_act;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 4)]
public short[] reserve;
}
/* cnc_rdlagslt:read laser assist gas selection */
/* cnc_wrlagslt:write laser assist gas selection */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBLAGSL
{
public short slct;
public short ag_slt;
public short agflow_slt;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 6)]
public short[] reserve = new short[6];
}
/* cnc_rdlagst:read laser assist gas flow */
/* cnc_wrlagst:write laser assist gas flow */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class GASFLOW
{
public short slct;
public short pre_time;
public short pre_press;
public short proc_press;
public short end_time;
public short end_press;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 3)]
public short[] reserve = new short[3];
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBLAGST
{
public GASFLOW data1 = new GASFLOW();
public GASFLOW data2 = new GASFLOW();
public GASFLOW data3 = new GASFLOW();
}
/* cnc_rdledgprc:read laser power for edge processing */
/* cnc_wrledgprc:write laser power for edge processing */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBLEGPR
{
public short slct;
public short power;
public short freq;
public short duty;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 5)]
public short[] reserve = new short[5];
}
/* cnc_rdlprcprc:read laser power for piercing */
/* cnc_wrlprcprc:write laser power for piercing */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBLPCPR
{
public short slct;
public short power;
public short freq;
public short duty;
public int time;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 4)]
public short[] reserve = new short[4];
}
/* cnc_rdlcmddat:read laser command data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBLCMDT
{
public short slct;
public int feed;
public short power;
public short freq;
public short duty;
public short g_kind;
public short g_ready_t;
public short g_press;
public short error;
public int dsplc;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 7)]
public short[] reserve = new short[7];
}
/* cnc_rdlactnum:read active number */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBLACTN
{
public short slct;
public short act_proc;
public short act_pirce;
public short act_slop;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 5)]
public short[] reserve = new short[5];
}
/* cnc_rdlcmmt:read laser comment */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ODBLCMMT
{
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 25)]
public string comment = new string(' ', 25);
}
/* cnc_rdpwofsthis:read power correction factor history data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBPWOFST_data
{
public int pwratio;
public int rfvolt;
public ushort year;
public ushort month;
public ushort day;
public ushort hour;
public ushort minute;
public ushort second;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBPWOFST
{
public ODBPWOFST_data data1 = new ODBPWOFST_data();
public ODBPWOFST_data data2 = new ODBPWOFST_data();
public ODBPWOFST_data data3 = new ODBPWOFST_data();
public ODBPWOFST_data data4 = new ODBPWOFST_data();
public ODBPWOFST_data data5 = new ODBPWOFST_data();
public ODBPWOFST_data data6 = new ODBPWOFST_data();
public ODBPWOFST_data data7 = new ODBPWOFST_data();
public ODBPWOFST_data data8 = new ODBPWOFST_data();
public ODBPWOFST_data data9 = new ODBPWOFST_data();
public ODBPWOFST_data data10 = new ODBPWOFST_data();
public ODBPWOFST_data data11 = new ODBPWOFST_data();
public ODBPWOFST_data data12 = new ODBPWOFST_data();
public ODBPWOFST_data data13 = new ODBPWOFST_data();
public ODBPWOFST_data data14 = new ODBPWOFST_data();
public ODBPWOFST_data data15 = new ODBPWOFST_data();
public ODBPWOFST_data data16 = new ODBPWOFST_data();
public ODBPWOFST_data data17 = new ODBPWOFST_data();
public ODBPWOFST_data data18 = new ODBPWOFST_data();
public ODBPWOFST_data data19 = new ODBPWOFST_data();
public ODBPWOFST_data data20 = new ODBPWOFST_data();
public ODBPWOFST_data data21 = new ODBPWOFST_data();
public ODBPWOFST_data data22 = new ODBPWOFST_data();
public ODBPWOFST_data data23 = new ODBPWOFST_data();
public ODBPWOFST_data data24 = new ODBPWOFST_data();
public ODBPWOFST_data data25 = new ODBPWOFST_data();
public ODBPWOFST_data data26 = new ODBPWOFST_data();
public ODBPWOFST_data data27 = new ODBPWOFST_data();
public ODBPWOFST_data data28 = new ODBPWOFST_data();
public ODBPWOFST_data data29 = new ODBPWOFST_data();
public ODBPWOFST_data data30 = new ODBPWOFST_data();
}
/* cnc_rdmngtime:read management time */
/* cnc_wrmngtime:write management time */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBMNGTIME_data
{
public uint life;
public uint total;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBMNGTIME
{
public IODBMNGTIME_data data1 = new IODBMNGTIME_data();
public IODBMNGTIME_data data2 = new IODBMNGTIME_data();
public IODBMNGTIME_data data3 = new IODBMNGTIME_data();
public IODBMNGTIME_data data4 = new IODBMNGTIME_data();
public IODBMNGTIME_data data5 = new IODBMNGTIME_data();
public IODBMNGTIME_data data6 = new IODBMNGTIME_data();
public IODBMNGTIME_data data7 = new IODBMNGTIME_data();
public IODBMNGTIME_data data8 = new IODBMNGTIME_data();
public IODBMNGTIME_data data9 = new IODBMNGTIME_data();
public IODBMNGTIME_data data10 = new IODBMNGTIME_data();
} /* In case that the number of data is 10 */
/* cnc_rddischarge:read data related to electrical discharge at power correction ends */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBDISCHRG
{
public ushort aps;
public ushort year;
public ushort month;
public ushort day;
public ushort hour;
public ushort minute;
public ushort second;
public short hpc;
public short hfq;
public short hdt;
public short hpa;
public int hce;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 8)]
public int[] rfi;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 8)]
public int[] rfv;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 8)]
public int[] dci;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 8)]
public int[] dcv;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 8)]
public int[] dcw;
}
/* cnc_rddischrgalm:read alarm history data related to electrical discharg */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBDISCHRGALM_data
{
public ushort year;
public ushort month;
public ushort day;
public ushort hour;
public ushort minute;
public ushort second;
public int almnum;
public uint psec;
public short hpc;
public short hfq;
public short hdt;
public short hpa;
public int hce;
public ushort asq;
public ushort psu;
public ushort aps;
public short dummy;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 8)]
public int[] rfi;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 8)]
public int[] rfv;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 8)]
public int[] dci;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 8)]
public int[] dcv;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 8)]
public int[] dcw;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 8)]
public short[] almcd;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBDISCHRGALM
{
public ODBDISCHRGALM_data data1 = new ODBDISCHRGALM_data();
public ODBDISCHRGALM_data data2 = new ODBDISCHRGALM_data();
public ODBDISCHRGALM_data data3 = new ODBDISCHRGALM_data();
public ODBDISCHRGALM_data data4 = new ODBDISCHRGALM_data();
public ODBDISCHRGALM_data data5 = new ODBDISCHRGALM_data();
}
/* cnc_gettimer:get date and time from cnc */
/* cnc_settimer:set date and time for cnc */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public struct TIMER_DATE
{
public short year;
public short month;
public short date;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public struct TIMER_TIME
{
public short hour;
public short minute;
public short second;
}
[StructLayout(LayoutKind.Explicit)]
public class IODBTIMER
{
[FieldOffset(0)]
public short type;
[FieldOffset(2)]
public short dummy;
[FieldOffset(4)]
public TIMER_DATE date;
[FieldOffset(4)]
public TIMER_TIME time;
}
/* cnc_rdtimer:read timer data from cnc */
/* cnc_wrtimer:write timer data for cnc */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTIME
{
public int minute;
public int msec;
}
/* cnc_rdtlctldata: read tool controll data */
/* cnc_wrtlctldata: write tool controll data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTLCTL
{
public short slct;
public short used_tool;
public short turret_indx;
public int zero_tl_no;
public int t_axis_move;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2)]
public int[] total_punch = new int[2];
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 11)]
public short[] reserve = new short[11];
}
/* cnc_rdtooldata: read tool data */
/* cnc_wrtooldata: read tool data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTLDT_data
{
public short slct;
public int tool_no;
public int x_axis_ofs;
public int y_axis_ofs;
public int turret_pos;
public int chg_tl_no;
public int punch_count;
public int tool_life;
public int m_tl_radius;
public int m_tl_angle;
public byte tl_shape;
public int tl_size_i;
public int tl_size_j;
public int tl_angle;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 3)]
public int[] reserve = new int[3];
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTLDT
{
public IODBTLDT_data data1 = new IODBTLDT_data();
public IODBTLDT_data data2 = new IODBTLDT_data();
public IODBTLDT_data data3 = new IODBTLDT_data();
public IODBTLDT_data data4 = new IODBTLDT_data();
public IODBTLDT_data data5 = new IODBTLDT_data();
public IODBTLDT_data data6 = new IODBTLDT_data();
public IODBTLDT_data data7 = new IODBTLDT_data();
public IODBTLDT_data data8 = new IODBTLDT_data();
public IODBTLDT_data data9 = new IODBTLDT_data();
public IODBTLDT_data data10 = new IODBTLDT_data();
} /* In case that the number of data is 10 */
/* cnc_rdmultitldt: read multi tool data */
/* cnc_wrmultitldt: write multi tool data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBMLTTL_data
{
public short slct;
public short m_tl_no;
public int m_tl_radius;
public int m_tl_angle;
public int x_axis_ofs;
public int y_axis_ofs;
public byte tl_shape;
public int tl_size_i;
public int tl_size_j;
public int tl_angle;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 7)]
public int[] reserve = new int[7];
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBMLTTL
{
public IODBMLTTL_data data1 = new IODBMLTTL_data();
public IODBMLTTL_data data2 = new IODBMLTTL_data();
public IODBMLTTL_data data3 = new IODBMLTTL_data();
public IODBMLTTL_data data4 = new IODBMLTTL_data();
public IODBMLTTL_data data5 = new IODBMLTTL_data();
public IODBMLTTL_data data6 = new IODBMLTTL_data();
public IODBMLTTL_data data7 = new IODBMLTTL_data();
public IODBMLTTL_data data8 = new IODBMLTTL_data();
public IODBMLTTL_data data9 = new IODBMLTTL_data();
public IODBMLTTL_data data10 = new IODBMLTTL_data();
} /* In case that the number of data is 10 */
/* cnc_rdmtapdata: read multi tap data */
/* cnc_wrmtapdata: write multi tap data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBMTAP_data
{
public short slct;
public int tool_no;
public int x_axis_ofs;
public int y_axis_ofs;
public int punch_count;
public int tool_life;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 11)]
public int[] reserve = new int[11];
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBMTAP
{
public IODBMTAP_data data1 = new IODBMTAP_data();
public IODBMTAP_data data2 = new IODBMTAP_data();
public IODBMTAP_data data3 = new IODBMTAP_data();
public IODBMTAP_data data4 = new IODBMTAP_data();
public IODBMTAP_data data5 = new IODBMTAP_data();
public IODBMTAP_data data6 = new IODBMTAP_data();
public IODBMTAP_data data7 = new IODBMTAP_data();
public IODBMTAP_data data8 = new IODBMTAP_data();
public IODBMTAP_data data9 = new IODBMTAP_data();
public IODBMTAP_data data10 = new IODBMTAP_data();
}
/* cnc_rdtoolinfo: read tool information */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBPTLINF
{
public short tld_max;
public short mlt_max;
public short reserve;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 16)]
public short[] tld_size;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 16)]
public short[] mlt_size;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 16)]
public short[] reserves;
}
/* cnc_rdsafetyzone: read safetyzone data */
/* cnc_wrsafetyzone: write safetyzone data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBSAFE_data
{
public short slct;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 3)]
public int[] data = new int[3];
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBSAFE
{
public IODBSAFE_data data1 = new IODBSAFE_data();
public IODBSAFE_data data2 = new IODBSAFE_data();
public IODBSAFE_data data3 = new IODBSAFE_data();
public IODBSAFE_data data4 = new IODBSAFE_data();
} /* In case that the number of data is 4 */
/* cnc_rdtoolzone: read toolzone data */
/* cnc_wrtoolzone: write toolzone data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTLZN_data
{
public short slct;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2)]
public int[] data = new int[12];
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBTLZN
{
public IODBTLZN_data data1 = new IODBTLZN_data();
public IODBTLZN_data data2 = new IODBTLZN_data();
public IODBTLZN_data data3 = new IODBTLZN_data();
public IODBTLZN_data data4 = new IODBTLZN_data();
public IODBTLZN_data data5 = new IODBTLZN_data();
public IODBTLZN_data data6 = new IODBTLZN_data();
public IODBTLZN_data data7 = new IODBTLZN_data();
public IODBTLZN_data data8 = new IODBTLZN_data();
public IODBTLZN_data data9 = new IODBTLZN_data();
public IODBTLZN_data data10 = new IODBTLZN_data();
public IODBTLZN_data data11 = new IODBTLZN_data();
public IODBTLZN_data data12 = new IODBTLZN_data();
} /* In case that the number of data is 12 */
/* cnc_rdacttlzone: read active toolzone data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBACTTLZN
{
public short act_no;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2)]
public int[] data;
}
/* cnc_rdbrstrinfo:read block restart information */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBBRS
{
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] dest;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] dist;
} /* In case that the number of axes is MAX_AXIS */
/* cnc_rdradofs:read tool radius offset for position data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBROFS
{
public short mode;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2)]
public short[] pln_axes;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2)]
public int[] ofsvct;
}
/* cnc_rdlenofs:read tool length offset for position data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBLOFS
{
public short mode;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] ofsvct;
} /* In case that the number of axes is MAX_AXIS */
/* cnc_rdfixcycle:read fixed cycle for position data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBFIX
{
public short mode;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2)]
public short[] pln_axes;
public short drl_axes;
public int i_pos;
public int r_pos;
public int z_pos;
public int cmd_cnt;
public int act_cnt;
public int cut;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2)]
public int[] shift;
}
/* cnc_rdcdrotate:read coordinate rotate for position data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBROT
{
public short mode;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2)]
public short[] pln_axes;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2)]
public int[] center;
public int angle;
}
/* cnc_rd3dcdcnv:read 3D coordinate convert for position data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODB3DCD
{
public short mode;
public short dno;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 3)]
public short[] cd_axes;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2 * 3)]
public int[] center;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2 * 3)]
public int[] direct;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 2)]
public int[] angle;
}
/* cnc_rdmirimage:read programable mirror image for position data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBMIR
{
public short mode;
public int mir_flag;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] mir_pos;
} /* In case that the number of axes is MAX_AXIS */
/* cnc_rdscaling:read scaling data for position data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSCL
{
public short mode;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] center;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] magnif;
} /* In case that the number of axes is MAX_AXIS */
/* cnc_rd3dtofs:read 3D tool offset for position data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODB3DTO
{
public short mode;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 3)]
public short[] ofs_axes;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 3)]
public int[] ofsvct;
}
/* cnc_rdposofs:read tool position offset for position data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBPOFS
{
public short mode;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public int[] ofsvct;
} /* In case that the number of axes is MAX_AXIS */
/* cnc_rdhpccset:read hpcc setting data */
/* cnc_wrhpccset:write hpcc setting data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBHPST
{
public short slct;
public short hpcc;
public short multi;
public short ovr1;
public short ign_f;
public short foward;
public int max_f;
public short ovr2;
public short ovr3;
public short ovr4;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 7)]
public int[] reserve = new int[7];
}
/* cnc_rdhpcctupr:read hpcc tuning data ( parameter input ) */
/* cnc_wrhpcctupr:write hpcc tuning data ( parameter input ) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBHPPR_tune
{
public short slct;
public short diff;
public short fine;
public short acc_lv;
public int max_f;
public short bipl;
public short aipl;
public int corner;
public short clamp;
public int radius;
public int max_cf;
public int min_cf;
public int foward;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 5)]
public int[] reserve = new int[5];
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBHPPR
{
public IODBHPPR_tune tune1 = new IODBHPPR_tune();
public IODBHPPR_tune tune2 = new IODBHPPR_tune();
public IODBHPPR_tune tune3 = new IODBHPPR_tune();
}
/* cnc_rdhpcctuac:read hpcc tuning data ( acc input ) */
/* cnc_wrhpcctuac:write hpcc tuning data ( acc input ) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBHPAC_tune
{
public short slct;
public short diff;
public short fine;
public short acc_lv;
public int bipl;
public short aipl;
public int corner;
public int clamp;
public int c_acc;
public int foward;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 8)]
public int[] reserve = new int[8];
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBHPAC
{
public IODBHPAC_tune tune1 = new IODBHPAC_tune();
public IODBHPAC_tune tune2 = new IODBHPAC_tune();
public IODBHPAC_tune tune3 = new IODBHPAC_tune();
}
/* cnc_rd3dtooltip:read tip of tool for 3D handle */
/* cnc_rd3dmovrlap:read move overrlap of tool for 3D handle */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODB3DHDL_data
{
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 5)]
public short[] axes;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 5)]
public int[] data;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODB3DHDL
{
public ODB3DHDL_data data1 = new ODB3DHDL_data();
public ODB3DHDL_data data2 = new ODB3DHDL_data();
}
/* cnc_rd3dpulse:read pulse for 3D handle */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODB3DPLS_data
{
public int right_angle_x;
public int right_angle_y;
public int tool_axis;
public int tool_tip_a_b;
public int tool_tip_c;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODB3DPLS
{
public ODB3DPLS_data pls1 = new ODB3DPLS_data();
public ODB3DPLS_data pls2 = new ODB3DPLS_data();
}
/* cnc_rdaxisname: read axis name */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBAXISNAME_data
{
public byte name; /* axis name */
public byte suff; /* suffix */
}
#if M_AXIS2
[StructLayout(LayoutKind.Sequential,Pack=4)]
public class ODBAXISNAME
{
public ODBAXISNAME_data data1 = new ODBAXISNAME_data();
public ODBAXISNAME_data data2 = new ODBAXISNAME_data();
public ODBAXISNAME_data data3 = new ODBAXISNAME_data();
public ODBAXISNAME_data data4 = new ODBAXISNAME_data();
public ODBAXISNAME_data data5 = new ODBAXISNAME_data();
public ODBAXISNAME_data data6 = new ODBAXISNAME_data();
public ODBAXISNAME_data data7 = new ODBAXISNAME_data();
public ODBAXISNAME_data data8 = new ODBAXISNAME_data();
public ODBAXISNAME_data data9 = new ODBAXISNAME_data();
public ODBAXISNAME_data data10= new ODBAXISNAME_data();
public ODBAXISNAME_data data11= new ODBAXISNAME_data();
public ODBAXISNAME_data data12= new ODBAXISNAME_data();
public ODBAXISNAME_data data13= new ODBAXISNAME_data();
public ODBAXISNAME_data data14= new ODBAXISNAME_data();
public ODBAXISNAME_data data15= new ODBAXISNAME_data();
public ODBAXISNAME_data data16= new ODBAXISNAME_data();
public ODBAXISNAME_data data17= new ODBAXISNAME_data();
public ODBAXISNAME_data data18= new ODBAXISNAME_data();
public ODBAXISNAME_data data19= new ODBAXISNAME_data();
public ODBAXISNAME_data data20= new ODBAXISNAME_data();
public ODBAXISNAME_data data21= new ODBAXISNAME_data();
public ODBAXISNAME_data data22= new ODBAXISNAME_data();
public ODBAXISNAME_data data23= new ODBAXISNAME_data();
public ODBAXISNAME_data data24= new ODBAXISNAME_data();
}
#elif FS15D
[StructLayout(LayoutKind.Sequential,Pack=4)]
public class ODBAXISNAME
{
public ODBAXISNAME_data data1 = new ODBAXISNAME_data();
public ODBAXISNAME_data data2 = new ODBAXISNAME_data();
public ODBAXISNAME_data data3 = new ODBAXISNAME_data();
public ODBAXISNAME_data data4 = new ODBAXISNAME_data();
public ODBAXISNAME_data data5 = new ODBAXISNAME_data();
public ODBAXISNAME_data data6 = new ODBAXISNAME_data();
public ODBAXISNAME_data data7 = new ODBAXISNAME_data();
public ODBAXISNAME_data data8 = new ODBAXISNAME_data();
public ODBAXISNAME_data data9 = new ODBAXISNAME_data();
public ODBAXISNAME_data data10= new ODBAXISNAME_data();
}
#else
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBAXISNAME
{
public ODBAXISNAME_data data1 = new ODBAXISNAME_data();
public ODBAXISNAME_data data2 = new ODBAXISNAME_data();
public ODBAXISNAME_data data3 = new ODBAXISNAME_data();
public ODBAXISNAME_data data4 = new ODBAXISNAME_data();
public ODBAXISNAME_data data5 = new ODBAXISNAME_data();
public ODBAXISNAME_data data6 = new ODBAXISNAME_data();
public ODBAXISNAME_data data7 = new ODBAXISNAME_data();
public ODBAXISNAME_data data8 = new ODBAXISNAME_data();
}
#endif
/* cnc_rdspdlname: read spindle name */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSPDLNAME_data
{
public byte name; /* spindle name */
public byte suff1; /* suffix */
public byte suff2; /* suffix */
public byte suff3; /* suffix */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSPDLNAME
{
public ODBSPDLNAME_data data1 = new ODBSPDLNAME_data();
public ODBSPDLNAME_data data2 = new ODBSPDLNAME_data();
public ODBSPDLNAME_data data3 = new ODBSPDLNAME_data();
public ODBSPDLNAME_data data4 = new ODBSPDLNAME_data();
}
/* cnc_exaxisname: read extended axis name */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBEXAXISNAME
{
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname1 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname2 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname3 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname4 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname5 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname6 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname7 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname8 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname9 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname10 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname11 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname12 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname13 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname14 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname15 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname16 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname17 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname18 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname19 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname20 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname21 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname22 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname23 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname24 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname25 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname26 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname27 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname28 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname29 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname30 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname31 = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string axname32 = new string(' ', 4);
}
/* cnc_wrunsolicprm: Set the unsolicited message parameters */
/* cnc_rdunsolicprm: Get the unsolicited message parameters */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public struct IODBUNSOLIC_pmc
{
public short type;
public short rdaddr;
public short rdno;
public short rdsize;
private int dummy;
}
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class IODBUNSOLIC
{
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 16)]
public string ipaddr = new string(' ', 16);
public ushort port;
public short reqaddr;
public short pmcno;
public short retry;
public short timeout;
public short alivetime;
public short setno;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 3)]
public IODBUNSOLIC_pmc[] rddata = new IODBUNSOLIC_pmc[3];
}
/* cnc_rdunsolicmsg: Reads the unsolicited message data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public struct IDBUNSOLICMSG_msg
{
public short rdsize;
public IntPtr data;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IDBUNSOLICMSG
{
public short getno;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 3)]
public IDBUNSOLICMSG_msg[] msg = new IDBUNSOLICMSG_msg[3];
}
/* cnc_rdpm_cncitem: read cnc maintenance item */
/* cnc_rdpm_mcnitem: read machine specific maintenance item */
/* cnc_wrpm_mcnitem: write machine specific maintenance item */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBITEM
{
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 62)]
public string name1 = new string(' ', 62);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 62)]
public string name2 = new string(' ', 62);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 62)]
public string name3 = new string(' ', 62);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 62)]
public string name4 = new string(' ', 62);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 62)]
public string name5 = new string(' ', 62);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 62)]
public string name6 = new string(' ', 62);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 62)]
public string name7 = new string(' ', 62);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 62)]
public string name8 = new string(' ', 62);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 62)]
public string name9 = new string(' ', 62);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 62)]
public string name10 = new string(' ', 62);
}
/* cnc_rdpm_item:read maintenance item status */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBPMAINTE_data
{
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 62)]
public string name = new string(' ', 62); /* name */
public int type; /* life count type */
public int total; /* total life time (minite basis) */
public int remain; /* life rest time */
public int stat; /* life state */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBPMAINTE
{
public IODBPMAINTE_data data1 = new IODBPMAINTE_data();
public IODBPMAINTE_data data2 = new IODBPMAINTE_data();
public IODBPMAINTE_data data3 = new IODBPMAINTE_data();
public IODBPMAINTE_data data4 = new IODBPMAINTE_data();
public IODBPMAINTE_data data5 = new IODBPMAINTE_data();
public IODBPMAINTE_data data6 = new IODBPMAINTE_data();
public IODBPMAINTE_data data7 = new IODBPMAINTE_data();
public IODBPMAINTE_data data8 = new IODBPMAINTE_data();
public IODBPMAINTE_data data9 = new IODBPMAINTE_data();
public IODBPMAINTE_data data10 = new IODBPMAINTE_data();
}
/* cnc_sysinfo_ex:read CNC system path information */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSYSEX_path
{
public short system;
public short group;
public short attrib;
public short ctrl_axis;
public short ctrl_srvo;
public short ctrl_spdl;
public short mchn_no;
public short reserved;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSYSEX_data
{
public ODBSYSEX_path data1 = new ODBSYSEX_path();
public ODBSYSEX_path data2 = new ODBSYSEX_path();
public ODBSYSEX_path data3 = new ODBSYSEX_path();
public ODBSYSEX_path data4 = new ODBSYSEX_path();
public ODBSYSEX_path data5 = new ODBSYSEX_path();
public ODBSYSEX_path data6 = new ODBSYSEX_path();
public ODBSYSEX_path data7 = new ODBSYSEX_path();
public ODBSYSEX_path data8 = new ODBSYSEX_path();
public ODBSYSEX_path data9 = new ODBSYSEX_path();
public ODBSYSEX_path data10 = new ODBSYSEX_path();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSYSEX
{
public short max_axis;
public short max_spdl;
public short max_path;
public short max_mchn;
public short ctrl_axis;
public short ctrl_srvo;
public short ctrl_spdl;
public short ctrl_path;
public short ctrl_mchn;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 3)]
public short[] reserved = new short[3];
public ODBSYSEX_data path = new ODBSYSEX_data();
}
/*------------------*/
/* CNC : SERCOS I/F */
/*------------------*/
/* cnc_srcsrdidinfo:Read ID information of SERCOS I/F */
/* cnc_srcswridinfo:Write ID information of SERCOS I/F */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class IODBIDINF
{
public int id_no;
public short drv_no;
public short acc_element;
public short err_general;
public short err_id_no;
public short err_id_name;
public short err_attr;
public short err_unit;
public short err_min_val;
public short err_max_val;
public short id_name_len;
public short id_name_max;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 60)]
public string id_name = new string(' ', 60);
public int attr;
public short unit_len;
public short unit_max;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 12)]
public byte[] unit = new byte[12];
public int min_val;
public int max_val;
}
/* cnc_srcsrdexstat:Get execution status of reading/writing operation data of SERCOS I/F */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSRCSST
{
public short acc_element;
public short err_general;
public short err_id_no;
public short err_attr;
public short err_op_data;
}
/* cnc_srcsrdlayout:Read drive assign of SERCOS I/F */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ODBSRCSLYT
{
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 4)]
public short[] spndl;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 8)]
public short[] servo;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 8)]
public string axis_name = new string(' ', 8);
}
/*----------------------------*/
/* CNC : Servo Guide */
/*----------------------------*/
/* cnc_sdsetchnl:Servo Guide (Channel data set) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IDBCHAN_data
{
public byte chno;
public sbyte axis;
public int datanum;
public ushort datainf;
public short dataadr;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IDBCHAN
{
public IDBCHAN_data data1 = new IDBCHAN_data();
public IDBCHAN_data data2 = new IDBCHAN_data();
public IDBCHAN_data data3 = new IDBCHAN_data();
public IDBCHAN_data data4 = new IDBCHAN_data();
public IDBCHAN_data data5 = new IDBCHAN_data();
public IDBCHAN_data data6 = new IDBCHAN_data();
public IDBCHAN_data data7 = new IDBCHAN_data();
public IDBCHAN_data data8 = new IDBCHAN_data();
}
/* cnc_sdsetchnl:Servo Guide (read Sampling data) */
/* cnc_sfbreadsmpl:Servo feedback data (read Sampling data) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSD
{
public IntPtr chadata;
public IntPtr count;
}
/* cnc_sfbsetchnl:Servo feedback data (Channel data set) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IDBSFBCHAN
{
public byte chno;
public sbyte axis;
public ushort shift;
}
/*-------------------------*/
/* CNC : FS18-LN function */
/*-------------------------*/
/* cnc_allowcnd:read allowanced state */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBCAXIS
{
public short dummy; /* dummy */
public short type; /* axis number */
[MarshalAs(UnmanagedType.ByValArray, SizeConst = MAX_AXIS)]
public sbyte[] data; /* data value */
}
/*---------------------------------*/
/* CNC : C-EXE SRAM file function */
/*---------------------------------*/
/* read C-EXE SRAM disk directory */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class CFILEINFO_data
{
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 12)]
public string fname = new string(' ', 12); /* file name */
public int file_size; /* file size (bytes) */
public int file_attr; /* attribute */
public short year; /* year */
public short month; /* month */
public short day; /* day */
public short hour; /* hour */
public short minute; /* mimute */
public short second; /* second */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class CFILEINFO
{
public CFILEINFO_data data1 = new CFILEINFO_data();
public CFILEINFO_data data2 = new CFILEINFO_data();
public CFILEINFO_data data3 = new CFILEINFO_data();
public CFILEINFO_data data4 = new CFILEINFO_data();
public CFILEINFO_data data5 = new CFILEINFO_data();
public CFILEINFO_data data6 = new CFILEINFO_data();
public CFILEINFO_data data7 = new CFILEINFO_data();
public CFILEINFO_data data8 = new CFILEINFO_data();
public CFILEINFO_data data9 = new CFILEINFO_data();
public CFILEINFO_data data10 = new CFILEINFO_data();
}
/*-----*/
/* PMC */
/*-----*/
/* pmc_rdpmcrng:read PMC data(area specified) */
/* pmc_wrpmcrng:write PMC data(area specified) */
[StructLayout(LayoutKind.Explicit)]
public class IODBPMC0
{
[FieldOffset(0)]
public short type_a; /* PMC address type */
[FieldOffset(2)]
public short type_d; /* PMC data type */
[FieldOffset(4)]
public short datano_s; /* start PMC address */
[FieldOffset(6)]
public short datano_e; /* end PMC address */
[FieldOffset(8),
MarshalAs(UnmanagedType.ByValArray, SizeConst = 5)]
public byte[] cdata; /* PMC data */
} /* In case that the number of data is 5 */
[StructLayout(LayoutKind.Explicit)]
public class IODBPMC1
{
[FieldOffset(0)]
public short type_a; /* PMC address type */
[FieldOffset(2)]
public short type_d; /* PMC data type */
[FieldOffset(4)]
public short datano_s; /* start PMC address */
[FieldOffset(6)]
public short datano_e; /* end PMC address */
[FieldOffset(8),
MarshalAs(UnmanagedType.ByValArray, SizeConst = 5)]
public short[] idata;
} /* In case that the number of data is 5 */
[StructLayout(LayoutKind.Explicit)]
public class IODBPMC2
{
[FieldOffset(0)]
public short type_a; /* PMC address type */
[FieldOffset(2)]
public short type_d; /* PMC data type */
[FieldOffset(4)]
public short datano_s; /* start PMC address */
[FieldOffset(6)]
public short datano_e; /* end PMC address */
[FieldOffset(8),
MarshalAs(UnmanagedType.ByValArray, SizeConst = 5)]
public int[] ldata;
} /* In case that the number of data is 5 */
/* pmc_rdpmcinfo:read informations of PMC data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBPMCINF_info
{
public char pmc_adr;
public byte adr_attr;
public ushort top_num;
public ushort last_num;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBPMCINF1
{
public ODBPMCINF_info info1 = new ODBPMCINF_info();
public ODBPMCINF_info info2 = new ODBPMCINF_info();
public ODBPMCINF_info info3 = new ODBPMCINF_info();
public ODBPMCINF_info info4 = new ODBPMCINF_info();
public ODBPMCINF_info info5 = new ODBPMCINF_info();
public ODBPMCINF_info info6 = new ODBPMCINF_info();
public ODBPMCINF_info info7 = new ODBPMCINF_info();
public ODBPMCINF_info info8 = new ODBPMCINF_info();
public ODBPMCINF_info info9 = new ODBPMCINF_info();
public ODBPMCINF_info info10 = new ODBPMCINF_info();
public ODBPMCINF_info info11 = new ODBPMCINF_info();
public ODBPMCINF_info info12 = new ODBPMCINF_info();
public ODBPMCINF_info info13 = new ODBPMCINF_info();
public ODBPMCINF_info info14 = new ODBPMCINF_info();
public ODBPMCINF_info info15 = new ODBPMCINF_info();
public ODBPMCINF_info info16 = new ODBPMCINF_info();
public ODBPMCINF_info info17 = new ODBPMCINF_info();
public ODBPMCINF_info info18 = new ODBPMCINF_info();
public ODBPMCINF_info info19 = new ODBPMCINF_info();
public ODBPMCINF_info info20 = new ODBPMCINF_info();
public ODBPMCINF_info info21 = new ODBPMCINF_info();
public ODBPMCINF_info info22 = new ODBPMCINF_info();
public ODBPMCINF_info info23 = new ODBPMCINF_info();
public ODBPMCINF_info info24 = new ODBPMCINF_info();
public ODBPMCINF_info info25 = new ODBPMCINF_info();
public ODBPMCINF_info info26 = new ODBPMCINF_info();
public ODBPMCINF_info info27 = new ODBPMCINF_info();
public ODBPMCINF_info info28 = new ODBPMCINF_info();
public ODBPMCINF_info info29 = new ODBPMCINF_info();
public ODBPMCINF_info info30 = new ODBPMCINF_info();
public ODBPMCINF_info info31 = new ODBPMCINF_info();
public ODBPMCINF_info info32 = new ODBPMCINF_info();
public ODBPMCINF_info info33 = new ODBPMCINF_info();
public ODBPMCINF_info info34 = new ODBPMCINF_info();
public ODBPMCINF_info info35 = new ODBPMCINF_info();
public ODBPMCINF_info info36 = new ODBPMCINF_info();
public ODBPMCINF_info info37 = new ODBPMCINF_info();
public ODBPMCINF_info info38 = new ODBPMCINF_info();
public ODBPMCINF_info info39 = new ODBPMCINF_info();
public ODBPMCINF_info info40 = new ODBPMCINF_info();
public ODBPMCINF_info info41 = new ODBPMCINF_info();
public ODBPMCINF_info info42 = new ODBPMCINF_info();
public ODBPMCINF_info info43 = new ODBPMCINF_info();
public ODBPMCINF_info info44 = new ODBPMCINF_info();
public ODBPMCINF_info info45 = new ODBPMCINF_info();
public ODBPMCINF_info info46 = new ODBPMCINF_info();
public ODBPMCINF_info info47 = new ODBPMCINF_info();
public ODBPMCINF_info info48 = new ODBPMCINF_info();
public ODBPMCINF_info info49 = new ODBPMCINF_info();
public ODBPMCINF_info info50 = new ODBPMCINF_info();
public ODBPMCINF_info info51 = new ODBPMCINF_info();
public ODBPMCINF_info info52 = new ODBPMCINF_info();
public ODBPMCINF_info info53 = new ODBPMCINF_info();
public ODBPMCINF_info info54 = new ODBPMCINF_info();
public ODBPMCINF_info info55 = new ODBPMCINF_info();
public ODBPMCINF_info info56 = new ODBPMCINF_info();
public ODBPMCINF_info info57 = new ODBPMCINF_info();
public ODBPMCINF_info info58 = new ODBPMCINF_info();
public ODBPMCINF_info info59 = new ODBPMCINF_info();
public ODBPMCINF_info info60 = new ODBPMCINF_info();
public ODBPMCINF_info info61 = new ODBPMCINF_info();
public ODBPMCINF_info info62 = new ODBPMCINF_info();
public ODBPMCINF_info info63 = new ODBPMCINF_info();
public ODBPMCINF_info info64 = new ODBPMCINF_info();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBPMCINF
{
public short datano;
public ODBPMCINF1 info = new ODBPMCINF1();
}
/* pmc_rdcntldata:read PMC parameter data table control data */
/* pmc_wrcntldata:write PMC parameter data table control data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBPMCCNTL_info
{
public byte tbl_prm;
public byte data_type;
public ushort data_size;
public ushort data_dsp;
public short dummy;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBPMCCNTL1
{
public IODBPMCCNTL_info info1 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info2 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info3 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info4 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info5 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info6 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info7 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info8 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info9 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info10 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info11 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info12 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info13 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info14 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info15 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info16 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info17 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info18 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info19 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info20 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info21 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info22 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info23 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info24 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info25 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info26 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info27 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info28 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info29 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info30 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info31 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info32 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info33 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info34 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info35 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info36 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info37 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info38 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info39 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info40 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info41 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info42 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info43 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info44 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info45 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info46 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info47 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info48 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info49 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info50 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info51 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info52 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info53 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info54 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info55 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info56 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info57 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info58 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info59 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info60 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info61 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info62 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info63 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info64 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info65 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info66 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info67 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info68 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info69 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info70 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info71 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info72 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info73 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info74 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info75 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info76 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info77 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info78 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info79 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info80 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info81 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info82 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info83 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info84 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info85 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info86 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info87 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info88 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info89 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info90 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info91 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info92 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info93 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info94 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info95 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info96 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info97 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info98 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info99 = new IODBPMCCNTL_info();
public IODBPMCCNTL_info info100 = new IODBPMCCNTL_info();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBPMCCNTL
{
public short datano_s;
public short dummy;
public short datano_e;
public IODBPMCCNTL1 info = new IODBPMCCNTL1();
}
/* pmc_rdalmmsg:read PMC alarm message */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ODBPMCALM_data
{
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 128)]
public string almmsg = new string(' ', 128); /* alarm message */
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBPMCALM
{
public ODBPMCALM_data msg1 = new ODBPMCALM_data();
public ODBPMCALM_data msg2 = new ODBPMCALM_data();
public ODBPMCALM_data msg3 = new ODBPMCALM_data();
public ODBPMCALM_data msg4 = new ODBPMCALM_data();
public ODBPMCALM_data msg5 = new ODBPMCALM_data();
public ODBPMCALM_data msg6 = new ODBPMCALM_data();
public ODBPMCALM_data msg7 = new ODBPMCALM_data();
public ODBPMCALM_data msg8 = new ODBPMCALM_data();
public ODBPMCALM_data msg9 = new ODBPMCALM_data();
public ODBPMCALM_data msg10 = new ODBPMCALM_data();
} /* In case that the number of data is 10 */
/* pmc_getdtailerr:get detail error for pmc */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBPMCERR
{
public short err_no;
public short err_dtno;
}
/* pmc_rdpmctitle:read pmc title data */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ODBPMCTITLE
{
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 48)]
public string mtb = new string(' ', 48);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 48)]
public string machine = new string(' ', 48);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 48)]
public string type = new string(' ', 48);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 8)]
public string prgno = new string(' ', 8);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]
public string prgvers = new string(' ', 4);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 48)]
public string prgdraw = new string(' ', 48);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 32)]
public string date = new string(' ', 32);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 48)]
public string design = new string(' ', 48);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 48)]
public string written = new string(' ', 48);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 48)]
public string remarks = new string(' ', 48);
}
/* pmc_rdpmcrng_ext:read PMC data */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBPMCEXT
{
public short type_a; /* PMC address type */
public short type_d; /* PMC data type */
public short datano_s; /* start PMC address */
public short datano_e; /* end PMC address */
public short err_code; /* error code */
public short reserved; /* reserved */
[MarshalAs(UnmanagedType.AsAny)]
public object data; /* pointer to buffer */
}
/* pmc_rdpmcaddr:read PMC address information */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBPMCADR_info
{
public byte pmc_adr;
public byte adr_attr;
public ushort offset;
public ushort top;
public ushort num;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBPMCADR1
{
public ODBPMCADR_info info1 = new ODBPMCADR_info();
public ODBPMCADR_info info2 = new ODBPMCADR_info();
public ODBPMCADR_info info3 = new ODBPMCADR_info();
public ODBPMCADR_info info4 = new ODBPMCADR_info();
public ODBPMCADR_info info5 = new ODBPMCADR_info();
public ODBPMCADR_info info6 = new ODBPMCADR_info();
public ODBPMCADR_info info7 = new ODBPMCADR_info();
public ODBPMCADR_info info8 = new ODBPMCADR_info();
public ODBPMCADR_info info9 = new ODBPMCADR_info();
public ODBPMCADR_info info10 = new ODBPMCADR_info();
public ODBPMCADR_info info11 = new ODBPMCADR_info();
public ODBPMCADR_info info12 = new ODBPMCADR_info();
public ODBPMCADR_info info13 = new ODBPMCADR_info();
public ODBPMCADR_info info14 = new ODBPMCADR_info();
public ODBPMCADR_info info15 = new ODBPMCADR_info();
public ODBPMCADR_info info16 = new ODBPMCADR_info();
public ODBPMCADR_info info17 = new ODBPMCADR_info();
public ODBPMCADR_info info18 = new ODBPMCADR_info();
public ODBPMCADR_info info19 = new ODBPMCADR_info();
public ODBPMCADR_info info20 = new ODBPMCADR_info();
public ODBPMCADR_info info21 = new ODBPMCADR_info();
public ODBPMCADR_info info22 = new ODBPMCADR_info();
public ODBPMCADR_info info23 = new ODBPMCADR_info();
public ODBPMCADR_info info24 = new ODBPMCADR_info();
public ODBPMCADR_info info25 = new ODBPMCADR_info();
public ODBPMCADR_info info26 = new ODBPMCADR_info();
public ODBPMCADR_info info27 = new ODBPMCADR_info();
public ODBPMCADR_info info28 = new ODBPMCADR_info();
public ODBPMCADR_info info29 = new ODBPMCADR_info();
public ODBPMCADR_info info30 = new ODBPMCADR_info();
public ODBPMCADR_info info31 = new ODBPMCADR_info();
public ODBPMCADR_info info32 = new ODBPMCADR_info();
public ODBPMCADR_info info33 = new ODBPMCADR_info();
public ODBPMCADR_info info34 = new ODBPMCADR_info();
public ODBPMCADR_info info35 = new ODBPMCADR_info();
public ODBPMCADR_info info36 = new ODBPMCADR_info();
public ODBPMCADR_info info37 = new ODBPMCADR_info();
public ODBPMCADR_info info38 = new ODBPMCADR_info();
public ODBPMCADR_info info39 = new ODBPMCADR_info();
public ODBPMCADR_info info40 = new ODBPMCADR_info();
public ODBPMCADR_info info41 = new ODBPMCADR_info();
public ODBPMCADR_info info42 = new ODBPMCADR_info();
public ODBPMCADR_info info43 = new ODBPMCADR_info();
public ODBPMCADR_info info44 = new ODBPMCADR_info();
public ODBPMCADR_info info45 = new ODBPMCADR_info();
public ODBPMCADR_info info46 = new ODBPMCADR_info();
public ODBPMCADR_info info47 = new ODBPMCADR_info();
public ODBPMCADR_info info48 = new ODBPMCADR_info();
public ODBPMCADR_info info49 = new ODBPMCADR_info();
public ODBPMCADR_info info50 = new ODBPMCADR_info();
public ODBPMCADR_info info51 = new ODBPMCADR_info();
public ODBPMCADR_info info52 = new ODBPMCADR_info();
public ODBPMCADR_info info53 = new ODBPMCADR_info();
public ODBPMCADR_info info54 = new ODBPMCADR_info();
public ODBPMCADR_info info55 = new ODBPMCADR_info();
public ODBPMCADR_info info56 = new ODBPMCADR_info();
public ODBPMCADR_info info57 = new ODBPMCADR_info();
public ODBPMCADR_info info58 = new ODBPMCADR_info();
public ODBPMCADR_info info59 = new ODBPMCADR_info();
public ODBPMCADR_info info60 = new ODBPMCADR_info();
public ODBPMCADR_info info61 = new ODBPMCADR_info();
public ODBPMCADR_info info62 = new ODBPMCADR_info();
public ODBPMCADR_info info63 = new ODBPMCADR_info();
public ODBPMCADR_info info64 = new ODBPMCADR_info();
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBPMCADR
{
public uint io_adr;
public short datano;
public ODBPMCADR1 info = new ODBPMCADR1();
}
/*--------------------------*/
/* PROFIBUS function */
/*--------------------------*/
/* pmc_prfrdconfig:read PROFIBUS configration data */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ODBPRFCNF
{
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string master_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 3)]
public string master_ver = new string(' ', 3);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string slave_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 3)]
public string slave_ver = new string(' ', 3);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 5)]
public string cntl_ser = new string(' ', 5);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 3)]
public string cntl_ver = new string(' ', 3);
}
/* pmc_prfrdbusprm:read bus parameter for master function */
/* pmc_prfwrbusprm:write bus parameter for master function */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBBUSPRM
{
public sbyte fdl_add;
public sbyte baudrate;
public ushort tsl;
public ushort min_tsdr;
public ushort max_tsdr;
public byte tqui;
public byte tset;
public int ttr;
public sbyte gap;
public sbyte hsa;
public sbyte max_retry;
public byte bp_flag;
public ushort min_slv_int;
public ushort poll_tout;
public ushort data_cntl;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 6)]
public byte[] reserve1 = new byte[6];
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 32)]
public byte[] cls2_name = new byte[32];
public short user_dlen;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 62)]
public byte[] user_data = new byte[62];
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 96)]
public byte[] reserve2 = new byte[96];
}
/* pmc_prfrdslvprm:read slave parameter for master function */
/* pmc_prfwrslvprm:write slave parameter for master function */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBSLVPRM
{
public short dis_enb;
public ushort ident_no;
public byte slv_flag;
public byte slv_type;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 12)]
public byte[] reserve1 = new byte[12];
public byte slv_stat;
public byte wd_fact1;
public byte wd_fact2;
public byte min_tsdr;
public char reserve2;
public byte grp_ident;
public short user_plen;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 32)]
public byte[] user_pdata = new byte[32];
public short cnfg_dlen;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 126)]
public byte[] cnfg_data = new byte[126];
public short slv_ulen;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 30)]
public byte[] slv_udata = new byte[30];
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 8)]
public byte[] reserve3 = new byte[8];
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBSLVPRM2
{
public short dis_enb;
public ushort ident_no;
public byte slv_flag;
public byte slv_type;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 12)]
public byte[] reserve1 = new byte[12];
public byte slv_stat;
public byte wd_fact1;
public byte wd_fact2;
public byte min_tsdr;
public sbyte reserve2;
public byte grp_ident;
public short user_plen;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 206)]
public byte[] user_pdata = new byte[206];
public short cnfg_dlen;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 126)]
public byte[] cnfg_data = new byte[126];
public short slv_ulen;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 30)]
public byte[] slv_udata = new byte[30];
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 8)]
public byte[] reserve3 = new byte[8];
}
/* pmc_prfrdallcadr:read allocation address for master function */
/* pmc_prfwrallcadr:set allocation address for master function */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBPRFADR
{
public byte di_size;
public byte di_type;
public ushort di_addr;
public short reserve1;
public byte do_size;
public byte do_type;
public ushort do_addr;
public short reserve2;
public byte dgn_size;
public byte dgn_type;
public ushort dgn_addr;
}
/* pmc_prfrdslvaddr:read allocation address for slave function */
/* pmc_prfwrslvaddr:set allocation address for slave function */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBSLVADR
{
public byte slave_no;
public byte di_size;
public byte di_type;
public ushort di_addr;
public byte do_size;
public byte do_type;
public ushort do_addr;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 7)]
public byte[] reserve = new byte[7];
}
/* pmc_prfrdslvstat:read status for slave function */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBSLVST
{
public byte cnfg_stat;
public byte prm_stat;
public sbyte wdg_stat;
public byte live_stat;
public short ident_no;
}
/* pmc_prfrdslvid:Reads slave index data of master function */
/* pmc_prfwrslvid:Writes slave index data of master function */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBSLVID
{
public short dis_enb;
public short slave_no;
public short nsl;
public byte dgn_size;
public char dgn_type;
public ushort dgn_addr;
}
/* pmc_prfrdslvprm2:Reads slave parameter of master function(2) */
/* pmc_prfwrslvprm2:Writes slave parameter of master function(2) */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBSLVPRM3
{
public ushort ident_no;
public byte slv_flag;
public byte slv_type;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 12)]
public char[] reserve1 = new char[12];
public byte slv_stat;
public byte wd_fact1;
public byte wd_fact2;
public byte min_tsdr;
public char reserve2;
public byte grp_ident;
public short user_plen;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 206)]
public char[] user_pdata = new char[206];
public short slv_ulen;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 30)]
public char[] slv_udata = new char[30];
}
/* pmc_prfrddido:Reads DI/DO parameter of master function */
/* pmc_prfwrdido:Writes DI/DO parameter of master function */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBDIDO
{
public short slave_no;
public short slot_no;
public byte di_size;
public char di_type;
public ushort di_addr;
public byte do_size;
public char do_type;
public ushort do_addr;
public short shift;
public byte module_dlen;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 128)]
public char[] module_data = new char[128];
}
/* pmc_prfrdindiadr:Reads indication address of master function */
/* pmc_prfwrindiadr:Writes indication address of master function */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBINDEADR
{
public byte dummy;
public char indi_type;
public ushort indi_addr;
}
/*-----------------------------------------------*/
/* DS : Data server & Ethernet board function */
/*-----------------------------------------------*/
/* etb_rdparam : read丂the parameter of the Ethernet board */
/* etb_wrparam : write the parameter of the Ethernet board */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class TCPPRM
{
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 16)]
public string OwnIPAddress = new string(' ', 16);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 16)]
public string SubNetMask = new string(' ', 16);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 16)]
public string RouterIPAddress = new string(' ', 16);
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class HOSTPRM
{
public short DataServerPort;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 16)]
public string DataServerIPAddress = new string(' ', 16);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 32)]
public string DataServerUserName = new string(' ', 32);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 32)]
public string DataServerPassword = new string(' ', 32);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 128)]
public string DataServerLoginDirectory = new string(' ', 128);
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class FTPPRM
{
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 32)]
public string FTPServerUserName = new string(' ', 32);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 32)]
public string FTPServerPassword = new string(' ', 32);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 128)]
public string FTPServerLoginDirectory = new string(' ', 128);
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ETBPRM
{
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 13)]
public string OwnMACAddress = new string(' ', 128);
public short MaximumChannel;
public short HDDExistence;
public short NumberOfScreens;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBETP
{
public short Dummy_ParameterType;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 210)]
public byte[] prm = new byte[210];
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBETP_TCP
{
public short ParameterType;
public TCPPRM tcp;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBETP_HOST
{
public short ParameterType;
public HOSTPRM host;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBETP_FTP
{
public short ParameterType;
public FTPPRM ftp;
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class IODBETP_ETB
{
public short ParameterType;
public ETBPRM etb;
}
/* etb_rderrmsg : read the error message of the Ethernet board */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBETMSG
{
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 33)]
public string title = new string(' ', 33);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 390)]
public string message = new string(' ', 390);
}
/* ds_rdhddinfo : read information of the Data Server's HDD */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBHDDINF
{
public int file_num;
public int remainder_l;
public int remainder_h;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 32)]
public char[] current_dir = new char[32];
}
/* ds_rdhdddir : read the file list of the Data Server's HDD */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBHDDDIR_data
{
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 64)]
public string file_name = new string(' ', 64);
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 80)]
public string comment = new string(' ', 80);
public short attribute;
public short reserved;
public int size;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 16)]
public string date = new string(' ', 16);
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBHDDDIR
{
public ODBHDDDIR_data data1 = new ODBHDDDIR_data();
public ODBHDDDIR_data data2 = new ODBHDDDIR_data();
public ODBHDDDIR_data data3 = new ODBHDDDIR_data();
public ODBHDDDIR_data data4 = new ODBHDDDIR_data();
public ODBHDDDIR_data data5 = new ODBHDDDIR_data();
public ODBHDDDIR_data data6 = new ODBHDDDIR_data();
public ODBHDDDIR_data data7 = new ODBHDDDIR_data();
public ODBHDDDIR_data data8 = new ODBHDDDIR_data();
public ODBHDDDIR_data data9 = new ODBHDDDIR_data();
public ODBHDDDIR_data data10 = new ODBHDDDIR_data();
public ODBHDDDIR_data data11 = new ODBHDDDIR_data();
public ODBHDDDIR_data data12 = new ODBHDDDIR_data();
public ODBHDDDIR_data data13 = new ODBHDDDIR_data();
public ODBHDDDIR_data data14 = new ODBHDDDIR_data();
public ODBHDDDIR_data data15 = new ODBHDDDIR_data();
public ODBHDDDIR_data data16 = new ODBHDDDIR_data();
public ODBHDDDIR_data data17 = new ODBHDDDIR_data();
public ODBHDDDIR_data data18 = new ODBHDDDIR_data();
public ODBHDDDIR_data data19 = new ODBHDDDIR_data();
public ODBHDDDIR_data data20 = new ODBHDDDIR_data();
public ODBHDDDIR_data data21 = new ODBHDDDIR_data();
public ODBHDDDIR_data data22 = new ODBHDDDIR_data();
public ODBHDDDIR_data data23 = new ODBHDDDIR_data();
public ODBHDDDIR_data data24 = new ODBHDDDIR_data();
public ODBHDDDIR_data data25 = new ODBHDDDIR_data();
public ODBHDDDIR_data data26 = new ODBHDDDIR_data();
public ODBHDDDIR_data data27 = new ODBHDDDIR_data();
public ODBHDDDIR_data data28 = new ODBHDDDIR_data();
public ODBHDDDIR_data data29 = new ODBHDDDIR_data();
public ODBHDDDIR_data data30 = new ODBHDDDIR_data();
public ODBHDDDIR_data data31 = new ODBHDDDIR_data();
public ODBHDDDIR_data data32 = new ODBHDDDIR_data();
}
/* ds_rdhostdir : read the file list of the host */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBHOSTDIR_data
{
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 128)]
public char[] host_file = new char[128];
}
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class ODBHOSTDIR
{
public ODBHOSTDIR_data data1 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data2 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data3 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data4 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data5 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data6 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data7 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data8 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data9 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data10 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data11 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data12 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data13 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data14 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data15 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data16 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data17 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data18 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data19 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data20 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data21 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data22 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data23 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data24 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data25 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data26 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data27 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data28 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data29 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data30 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data31 = new ODBHOSTDIR_data();
public ODBHOSTDIR_data data32 = new ODBHOSTDIR_data();
}
/* ds_rdmntinfo : read maintenance information */
[StructLayout(LayoutKind.Sequential, Pack = 4)]
public class DSMNTINFO
{
public ushort empty_cnt;
public uint total_size;
public ushort ReadPtr;
public ushort WritePtr;
} ;
/*--------------------------*/
/* HSSB multiple connection */
/*--------------------------*/
/* cnc_rdnodeinfo:read node informations */
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 4)]
public class ODBNODE
{
public int node_no;
public int io_base;
public int status;
public int cnc_type;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 20)]
public string node_name = new string(' ', 20);
}
/*-------------------------------------*/
/* CNC: Control axis / spindle related */
/*-------------------------------------*/
/* read actual axis feedrate(F) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_actf")]
public static extern short cnc_actf(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBACT a);
/* read absolute axis position */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_absolute")]
public static extern short cnc_absolute(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBAXIS c);
/* read machine axis position */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_machine")]
public static extern short cnc_machine(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBAXIS c);
/* read relative axis position */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_relative")]
public static extern short cnc_relative(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBAXIS c);
/* read distance to go */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_distance")]
public static extern short cnc_distance(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBAXIS c);
/* read skip position */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_skip")]
public static extern short cnc_skip(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBAXIS c);
/* read servo delay value */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_srvdelay")]
public static extern short cnc_srvdelay(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBAXIS c);
/* read acceleration/deceleration delay value */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_accdecdly")]
public static extern short cnc_accdecdly(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBAXIS c);
/* read all dynamic data */
#if (!ONO8D)
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rddynamic")]
public static extern short cnc_rddynamic(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBDY_1 c);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rddynamic")]
public static extern short cnc_rddynamic(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBDY_2 c);
#else
[DllImport("FWLIB32.dll", EntryPoint="cnc_rddynamico8")]
public static extern short cnc_rddynamic(ushort FlibHndl,
short a, short b, [Out,MarshalAs(UnmanagedType.LPStruct)] ODBDY_1 c);
[DllImport("FWLIB32.dll", EntryPoint="cnc_rddynamico8")]
public static extern short cnc_rddynamic(ushort FlibHndl,
short a, short b, [Out,MarshalAs(UnmanagedType.LPStruct)] ODBDY_2 c);
#endif
/* read all dynamic data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rddynamic2")]
public static extern short cnc_rddynamic2(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBDY2_1 c);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rddynamic2")]
public static extern short cnc_rddynamic2(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBDY2_2 c);
/* read actual spindle speed(S) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_acts")]
public static extern short cnc_acts(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBACT a);
/* read actual spindle speed(S) (All or spesified) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_acts2")]
public static extern short cnc_acts2(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBACT2 b);
/* set origin / preset relative axis position */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrrelpos")]
public static extern short cnc_wrrelpos(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IDBWRR b);
/* preset work coordinate */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_prstwkcd")]
public static extern short cnc_prstwkcd(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IDBWRA b);
/* read manual overlapped motion value */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdmovrlap")]
public static extern short cnc_rdmovrlap(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBOVL c);
/* cancel manual overlapped motion value */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_canmovrlap")]
public static extern short cnc_canmovrlap(ushort FlibHndl, short a);
/* read load information of serial spindle */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdspload")]
public static extern short cnc_rdspload(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBSPN b);
/* read maximum r.p.m. ratio of serial spindle */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdspmaxrpm")]
public static extern short cnc_rdspmaxrpm(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBSPN b);
/* read gear ratio of serial spindle */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdspgear")]
public static extern short cnc_rdspgear(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBSPN b);
/* read absolute axis position 2 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_absolute2")]
public static extern short cnc_absolute2(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBAXIS c);
/* read relative axis position 2 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_relative2")]
public static extern short cnc_relative2(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBAXIS c);
/* set wire vertival position */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_setvrtclpos")]
public static extern short cnc_setvrtclpos(ushort FlibHndl, short a);
/* set wire threading position */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_setthrdngpos")]
public static extern short cnc_setthrdngpos(ushort FlibHndl);
/* read tool position */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdposition")]
public static extern short cnc_rdposition(ushort FlibHndl,
short a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBPOS c);
/* read current speed */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdspeed")]
public static extern short cnc_rdspeed(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBSPEED b);
/* read servo load meter */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdsvmeter")]
public static extern short cnc_rdsvmeter(ushort FlibHndl,
ref short a, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBSVLOAD b);
/* read spindle load meter */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdspmeter")]
public static extern short cnc_rdspmeter(ushort FlibHndl,
short a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBSPLOAD c);
/* read manual feed for 5-axis machining */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rd5axmandt")]
public static extern short cnc_rd5axmandt(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODB5AXMAN a);
/* read amount of machine axes movement of manual feed for 5-axis machining */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rd5axovrlap")]
public static extern short cnc_rd5axovrlap(ushort FlibHndl, short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBAXIS c);
/* read handle interruption */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdhndintrpt")]
public static extern short cnc_rdhndintrpt(ushort FlibHndl,
short a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBHND c);
/* clear pulse values of manual feed for 5-axis machining */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_clr5axpls")]
public static extern short cnc_clr5axpls(ushort FlibHndl, short a);
/* read constant surface speed */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdspcss")]
public static extern short cnc_rdspcss(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBCSS a);
/* read execution program pointer */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdexecpt")]
public static extern short cnc_rdexecpt(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] PRGPNT a, [Out, MarshalAs(UnmanagedType.LPStruct)] PRGPNT b);
/* read various axis data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdaxisdata")]
public static extern short cnc_rdaxisdata(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.AsAny)] Object b, short c, ref short d, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBAXDT e);
/*----------------------*/
/* CNC: Program related */
/*----------------------*/
/* start downloading NC program */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dwnstart")]
public static extern short cnc_dwnstart(ushort FlibHndl);
/* download NC program */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_download")]
public static extern short cnc_download(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a, short b);
/* download NC program(conditional) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_cdownload")]
public static extern short cnc_cdownload(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a, short b);
/* end of downloading NC program */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dwnend")]
public static extern short cnc_dwnend(ushort FlibHndl);
/* end of downloading NC program 2 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dwnend2")]
public static extern short cnc_dwnend2(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* start downloading NC program 3 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dwnstart3")]
public static extern short cnc_dwnstart3(ushort FlibHndl, short a);
/* start downloading NC program 3 special */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dwnstart3_f")]
public static extern short cnc_dwnstart3_f(ushort FlibHndl,
short a, [In, MarshalAs(UnmanagedType.AsAny)] Object b, [In, MarshalAs(UnmanagedType.AsAny)] Object c);
/* download NC program 3 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_download3")]
public static extern short cnc_download3(ushort FlibHndl, ref int a, [In, MarshalAs(UnmanagedType.AsAny)] Object b);
/* end of downloading NC program 3 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dwnend3")]
public static extern short cnc_dwnend3(ushort FlibHndl);
/* start downloading NC program 4 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dwnstart4")]
public static extern short cnc_dwnstart4(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.AsAny)] Object b);
/* download NC program 4 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_download4")]
public static extern short cnc_download4(ushort FlibHndl, ref int a, [In, MarshalAs(UnmanagedType.AsAny)] Object b);
/* end of downloading NC program 4 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dwnend4")]
public static extern short cnc_dwnend4(ushort FlibHndl);
/* start verification of NC program */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_vrfstart")]
public static extern short cnc_vrfstart(ushort FlibHndl);
/* verify NC program */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_verify")]
public static extern short cnc_verify(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a, short b);
/* verify NC program(conditional) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_cverify")]
public static extern short cnc_cverify(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a, short b);
/* end of verification */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_vrfend")]
public static extern short cnc_vrfend(ushort FlibHndl);
/* start verification of NC program */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_vrfstart4")]
public static extern short cnc_vrfstart4(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* verify NC program */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_verify4")]
public static extern short cnc_verify4(ushort FlibHndl, ref int a, [In, MarshalAs(UnmanagedType.AsAny)] Object b);
/* end of verification */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_vrfend4")]
public static extern short cnc_vrfend4(ushort FlibHndl);
/* start downloading DNC program */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dncstart")]
public static extern short cnc_dncstart(ushort FlibHndl);
/* download DNC program */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dnc")]
public static extern short cnc_dnc(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a, ushort b);
/* download DNC program(conditional) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_cdnc")]
public static extern short cnc_cdnc(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a, ushort b);
/* end of downloading DNC program */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dncend")]
public static extern short cnc_dncend(ushort FlibHndl);
/* start downloading DNC program 2 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dncstart2")]
public static extern short cnc_dncstart2(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* download DNC program 2 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dnc2")]
public static extern short cnc_dnc2(ushort FlibHndl, ref int a, [In, MarshalAs(UnmanagedType.AsAny)] Object b);
/* end of downloading DNC program 2 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dncend2")]
public static extern short cnc_dncend2(ushort FlibHndl, short a);
/* read the diagnosis data of DNC operation */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rddncdgndt")]
public static extern short cnc_rddncdgndt(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBDNCDGN a);
/* start uploading NC program */
#if (!ONO8D)
[DllImport("FWLIB32.dll", EntryPoint = "cnc_upstart")]
public static extern short cnc_upstart(ushort FlibHndl, short a);
#else
[DllImport("FWLIB32.dll", EntryPoint="cnc_upstarto8")]
public static extern short cnc_upstart( ushort FlibHndl, int a );
#endif
/* upload NC program */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_upload")]
public static extern short cnc_upload(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBUP a, ref ushort b);
/* upload NC program(conditional) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_cupload")]
public static extern short cnc_cupload(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBUP a, ref ushort b);
/* end of uploading NC program */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_upend")]
public static extern short cnc_upend(ushort FlibHndl);
/* start uploading NC program 3 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_upstart3")]
public static extern short cnc_upstart3(ushort FlibHndl, short a, int b, int c);
/* start uploading NC program special 3 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_upstart3_f")]
public static extern short cnc_upstart3_f(ushort FlibHndl,
short a, [In, MarshalAs(UnmanagedType.AsAny)] Object b, [In, MarshalAs(UnmanagedType.AsAny)] Object c);
/* upload NC program 3 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_upload3")]
public static extern short cnc_upload3(ushort FlibHndl, ref int a, [Out, MarshalAs(UnmanagedType.AsAny)] Object b);
/* end of uploading NC program 3 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_upend3")]
public static extern short cnc_upend3(ushort FlibHndl);
/* start uploading NC program 4 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_upstart4")]
public static extern short cnc_upstart4(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.AsAny)] Object b);
/* upload NC program 4 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_upload4")]
public static extern short cnc_upload4(ushort FlibHndl, ref int a, [Out, MarshalAs(UnmanagedType.AsAny)] Object b);
/* end of uploading NC program 4 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_upend4")]
public static extern short cnc_upend4(ushort FlibHndl);
/* read buffer status for downloading/verification NC program */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_buff")]
public static extern short cnc_buff(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBBUF a);
/* search specified program */
#if (!ONO8D)
[DllImport("FWLIB32.dll", EntryPoint = "cnc_search")]
public static extern short cnc_search(ushort FlibHndl, short a);
#else
[DllImport("FWLIB32.dll", EntryPoint="cnc_searcho8")]
public static extern short cnc_search( ushort FlibHndl, int a );
#endif
/* search specified program */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_search2")]
public static extern short cnc_search2(ushort FlibHndl, int a);
/* delete all programs */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_delall")]
public static extern short cnc_delall(ushort FlibHndl);
/* delete specified program */
#if (!ONO8D)
[DllImport("FWLIB32.dll", EntryPoint = "cnc_delete")]
public static extern short cnc_delete(ushort FlibHndl, short a);
#else
[DllImport("FWLIB32.dll", EntryPoint="cnc_deleteo8")]
public static extern short cnc_delete( ushort FlibHndl, int a );
#endif
/* delete program (area specified) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_delrange")]
public static extern short cnc_delrange(ushort FlibHndl, int a, int b);
/* read program directory */
#if (!ONO8D)
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdprogdir")]
public static extern short cnc_rdprogdir(ushort FlibHndl,
short a, short b, short c, ushort d, [Out, MarshalAs(UnmanagedType.LPStruct)] PRGDIR e);
#else
[DllImport("FWLIB32.dll", EntryPoint="cnc_rdprogdiro8")]
public static extern short cnc_rdprogdir( ushort FlibHndl,
short a, short b, short c, ushort d, [Out,MarshalAs(UnmanagedType.LPStruct)] PRGDIR e );
#endif
/* read program information */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdproginfo")]
public static extern short cnc_rdproginfo(ushort FlibHndl, short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBNC_1 c);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdproginfo")]
public static extern short cnc_rdproginfo(ushort FlibHndl, short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBNC_2 c);
/* read program number under execution */
#if (!ONO8D)
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdprgnum")]
public static extern short cnc_rdprgnum(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBPRO a);
#else
[DllImport("FWLIB32.dll", EntryPoint="cnc_rdprgnumo8")]
public static extern short cnc_rdprgnum( ushort FlibHndl, [Out,MarshalAs(UnmanagedType.LPStruct)] ODBPRO a );
#endif
/* read program name under execution */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_exeprgname")]
public static extern short cnc_exeprgname(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBEXEPRG a);
/* read sequence number under execution */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdseqnum")]
public static extern short cnc_rdseqnum(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBSEQ a);
/* search specified sequence number */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_seqsrch")]
public static extern short cnc_seqsrch(ushort FlibHndl, int a);
/* search specified sequence number (2) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_seqsrch2")]
public static extern short cnc_seqsrch2(ushort FlibHndl, int a);
/* rewind cursor of NC program */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rewind")]
public static extern short cnc_rewind(ushort FlibHndl);
/* read block counter */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdblkcount")]
public static extern short cnc_rdblkcount(ushort FlibHndl, out int a);
/* read program under execution */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdexecprog")]
public static extern short cnc_rdexecprog(ushort FlibHndl, ref ushort a, out short b, [Out, MarshalAs(UnmanagedType.AsAny)] Object c);
/* read program for MDI operation */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdmdiprog")]
public static extern short cnc_rdmdiprog(ushort FlibHndl, ref short a, [Out, MarshalAs(UnmanagedType.AsAny)] Object b);
/* write program for MDI operation */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrmdiprog")]
public static extern short cnc_wrmdiprog(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.AsAny)] Object b);
/* read execution pointer for MDI operation */
#if (!ONO8D)
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdmdipntr")]
public static extern short cnc_rdmdipntr(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBMDIP a);
#else
[DllImport("FWLIB32.dll", EntryPoint="cnc_rdmdipntro8")]
public static extern short cnc_rdmdipntr( ushort FlibHndl, [Out,MarshalAs(UnmanagedType.LPStruct)] ODBMDIP a );
#endif
/* write execution pointer for MDI operation */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrmdipntr")]
public static extern short cnc_wrmdipntr(ushort FlibHndl, int a);
/* register new program */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_newprog")]
public static extern short cnc_newprog(ushort FlibHndl, int a);
/* copy program */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_copyprog")]
public static extern short cnc_copyprog(ushort FlibHndl, int a, int b);
/* rename program */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_renameprog")]
public static extern short cnc_renameprog(ushort FlibHndl, int a, int b);
/* condense program */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_condense")]
public static extern short cnc_condense(ushort FlibHndl, short a, int b);
/* merge program */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_mergeprog")]
public static extern short cnc_mergeprog(ushort FlibHndl, short a, int b, uint c, int d);
/* read current program and its pointer */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdactpt")]
public static extern short cnc_rdactpt(ushort FlibHndl, out int a, out int b);
/* read current program and its pointer and UV macro pointer */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rduvactpt")]
public static extern short cnc_rduvactpt(ushort FlibHndl, out int a, out int b, out int c);
/* set current program and its pointer */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wractpt")]
public static extern short cnc_wractpt(ushort FlibHndl, int a, short b, ref int c);
/* line edit (read program) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdprogline")]
public static extern short cnc_rdprogline(ushort FlibHndl,
int a, uint b, [Out, MarshalAs(UnmanagedType.AsAny)] Object c, ref uint d, ref uint e);
/* line edit (read program) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdprogline2")]
public static extern short cnc_rdprogline2(ushort FlibHndl,
int a, uint b, [Out, MarshalAs(UnmanagedType.AsAny)] Object c, ref uint d, ref uint e);
/* line edit (write program) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrprogline")]
public static extern short cnc_wrprogline(ushort FlibHndl, int a, uint b, [In, MarshalAs(UnmanagedType.AsAny)] Object c, uint d);
/* line edit (delete line in program) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_delprogline")]
public static extern short cnc_delprogline(ushort FlibHndl, int a, uint b, uint c);
/* line edit (search string) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_searchword")]
public static extern short cnc_searchword(ushort FlibHndl,
int a, uint b, short c, short d, uint e, [In, MarshalAs(UnmanagedType.AsAny)] Object f);
/* line edit (search string) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_searchresult")]
public static extern short cnc_searchresult(ushort FlibHndl, out uint a);
/* line edit (read program by file name) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdpdf_line")]
public static extern short cnc_rdpdf_line(ushort FlibHndl,
[In, MarshalAs(UnmanagedType.AsAny)] Object a, uint b, [Out, MarshalAs(UnmanagedType.AsAny)] Object c, ref uint d, ref uint e);
/* program lock */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_setpglock")]
public static extern short cnc_setpglock(ushort FlibHndl, int a);
/* program unlock */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_resetpglock")]
public static extern short cnc_resetpglock(ushort FlibHndl, int a);
/* read the status of the program lock */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdpglockstat")]
public static extern short cnc_rdpglockstat(ushort FlibHndl, out int a, out int b);
/* create file or directory */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_pdf_add")]
public static extern short cnc_pdf_add(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* condense program file */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_pdf_cond")]
public static extern short cnc_pdf_cond(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* change attribute of program file and directory */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrpdf_attr")]
public static extern short cnc_wrpdf_attr(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a, [Out, MarshalAs(UnmanagedType.LPStruct)] IDBPDFTDIR b);
/* copy program file */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_pdf_copy")]
public static extern short cnc_pdf_copy(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a, [In, MarshalAs(UnmanagedType.AsAny)] Object b);
/* delete file or directory */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_pdf_del")]
public static extern short cnc_pdf_del(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* line edit (write program by file name) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrpdf_line")]
public static extern short cnc_wrpdf_line(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a, uint b, [In, MarshalAs(UnmanagedType.AsAny)] Object c, uint d);
/* line edit (delete line by file name) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_pdf_delline")]
public static extern short cnc_pdf_delline(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a, uint b, uint c);
/* move program file */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_pdf_move")]
public static extern short cnc_pdf_move(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a, [In, MarshalAs(UnmanagedType.AsAny)] Object b);
/* read current program and its pointer */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_pdf_rdactpt")]
public static extern short cnc_pdf_rdactpt(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.AsAny)] Object a, out int b);
/* read selected file name */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_pdf_rdmain")]
public static extern short cnc_pdf_rdmain(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.AsAny)] Object a);
/* rename file or directory */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_pdf_rename")]
public static extern short cnc_pdf_rename(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a, [In, MarshalAs(UnmanagedType.AsAny)] Object b);
/* line edit (search string) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_pdf_searchword")]
public static extern short cnc_pdf_searchword(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a, uint b, uint c, uint d, uint e, [In, MarshalAs(UnmanagedType.AsAny)] Object f);
/* line edit (search string) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_pdf_searchresult")]
public static extern short cnc_pdf_searchresult(ushort FlibHndl, out uint a);
/* select program file */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_pdf_slctmain")]
public static extern short cnc_pdf_slctmain(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* set current program and its pointer */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_pdf_wractpt")]
public static extern short cnc_pdf_wractpt(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a, short b, ref int c);
/* read program drive information */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdpdf_inf")]
public static extern short cnc_rdpdf_inf(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a, short b, [Out, MarshalAs(UnmanagedType.AsAny)] Object c);
/* read program drive directory */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdpdf_drive")]
public static extern short cnc_rdpdf_drive(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.AsAny)] Object a);
/* read current directory */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdpdf_curdir")]
public static extern short cnc_rdpdf_curdir(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.AsAny)] Object b);
/* set current directory */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrpdf_curdir")]
public static extern short cnc_wrpdf_curdir(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.AsAny)] Object b);
/* read directory (sub directories) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdpdf_subdir")]
public static extern short cnc_rdpdf_subdir(ushort FlibHndl,
ref short a, [In, MarshalAs(UnmanagedType.LPStruct)] IDBPDFSDIR b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBPDFSDIR c);
/* read directory (all files) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdpdf_alldir")]
public static extern short cnc_rdpdf_alldir(ushort FlibHndl, ref short a, [In, MarshalAs(UnmanagedType.AsAny)] Object b, [Out, MarshalAs(UnmanagedType.AsAny)] Object c);
/* read file count in directory */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdpdf_subdirn")]
public static extern short cnc_rdpdf_subdirn(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBPDFNFIL b);
/*---------------------------*/
/* CNC: NC file data related */
/*---------------------------*/
/* read tool offset value */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdtofs")]
public static extern short cnc_rdtofs(ushort FlibHndl,
short a, short b, short c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBTOFS d);
/* write tool offset value */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrtofs")]
public static extern short cnc_wrtofs(ushort FlibHndl, short a, short b, short c, int d);
/* read tool offset value(area specified) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdtofsr")]
public static extern short cnc_rdtofsr(ushort FlibHndl,
short a, short b, short c, short d, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBTO_1_1 e);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdtofsr")]
public static extern short cnc_rdtofsr(ushort FlibHndl,
short a, short b, short c, short d, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBTO_1_2 e);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdtofsr")]
public static extern short cnc_rdtofsr(ushort FlibHndl,
short a, short b, short c, short d, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBTO_1_3 e);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdtofsr")]
public static extern short cnc_rdtofsr(ushort FlibHndl,
short a, short b, short c, short d, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBTO_2 e);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdtofsr")]
public static extern short cnc_rdtofsr(ushort FlibHndl,
short a, short b, short c, short d, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBTO_3 e);
/* write tool offset value(area specified) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrtofsr")]
public static extern short cnc_wrtofsr(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBTO_1_1 b);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrtofsr")]
public static extern short cnc_wrtofsr(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBTO_1_2 b);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrtofsr")]
public static extern short cnc_wrtofsr(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBTO_1_3 b);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrtofsr")]
public static extern short cnc_wrtofsr(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBTO_2 b);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrtofsr")]
public static extern short cnc_wrtofsr(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBTO_3 b);
/* read work zero offset value */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdzofs")]
public static extern short cnc_rdzofs(ushort FlibHndl,
short a, short b, short c, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBZOFS d);
/* write work zero offset value */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrzofs")]
public static extern short cnc_wrzofs(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBZOFS b);
/* read work zero offset value(area specified) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdzofsr")]
public static extern short cnc_rdzofsr(ushort FlibHndl,
short a, short b, short c, short d, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBZOR e);
/* write work zero offset value(area specified) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrzofsr")]
public static extern short cnc_wrzofsr(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBZOR b);
/* read mesured point value */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdmsptype")]
public static extern short cnc_rdmsptype(ushort FlibHndl,
short a, short b, short c, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBMSTP d);
/* write mesured point value */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrmsptype")]
public static extern short cnc_wrmsptype(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBMSTP d);
/* read parameter */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdparam")]
public static extern short cnc_rdparam(ushort FlibHndl,
short a, short b, short c, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBPSD_1 d);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdparam")]
public static extern short cnc_rdparam(ushort FlibHndl,
short a, short b, short c, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBPSD_2 d);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdparam")]
public static extern short cnc_rdparam(ushort FlibHndl,
short a, short b, short c, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBPSD_3 d);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdparam")]
public static extern short cnc_rdparam(ushort FlibHndl,
short a, short b, short c, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBPSD_4 d);
/* write parameter */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrparam")]
public static extern short cnc_wrparam(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBPSD_1 b);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrparam")]
public static extern short cnc_wrparam(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBPSD_2 b);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrparam")]
public static extern short cnc_wrparam(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBPSD_3 b);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrparam")]
public static extern short cnc_wrparam(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBPSD_4 b);
/* read parameter(area specified) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdparar")]
public static extern short cnc_rdparar(ushort FlibHndl,
ref short a, short b, ref short c, ref short d, [Out, MarshalAs(UnmanagedType.AsAny)] Object e);
// [DllImport("FWLIB32.dll", EntryPoint="cnc_rdparar")]
// public static extern short cnc_rdparar( ushort FlibHndl,
// ref short a, short b, ref short c, ref short d, [Out,MarshalAs(UnmanagedType.LPStruct)] IODBPSD_A e );
// [DllImport("FWLIB32.dll", EntryPoint="cnc_rdparar")]
// public static extern short cnc_rdparar( ushort FlibHndl,
// ref short a, short b, ref short c, ref short d, [Out,MarshalAs(UnmanagedType.LPStruct)] IODBPSD_B e );
// [DllImport("FWLIB32.dll", EntryPoint="cnc_rdparar")]
// public static extern short cnc_rdparar( ushort FlibHndl,
// ref short a, short b, ref short c, ref short d, [Out,MarshalAs(UnmanagedType.LPStruct)] IODBPSD_C e );
// [DllImport("FWLIB32.dll", EntryPoint="cnc_rdparar")]
// public static extern short cnc_rdparar( ushort FlibHndl,
// ref short a, short b, ref short c, ref short d, [Out,MarshalAs(UnmanagedType.LPStruct)] IODBPSD_D e );
/* write parameter(area specified) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrparas")]
public static extern short cnc_wrparas(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.AsAny)] Object b);
/* read setting data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdset")]
public static extern short cnc_rdset(ushort FlibHndl,
short a, short b, short c, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBPSD_1 d);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdset")]
public static extern short cnc_rdset(ushort FlibHndl,
short a, short b, short c, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBPSD_2 d);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdset")]
public static extern short cnc_rdset(ushort FlibHndl,
short a, short b, short c, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBPSD_3 d);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdset")]
public static extern short cnc_rdset(ushort FlibHndl,
short a, short b, short c, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBPSD_4 d);
/* write setting data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrset")]
public static extern short cnc_wrset(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBPSD_1 b);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrset")]
public static extern short cnc_wrset(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBPSD_2 b);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrset")]
public static extern short cnc_wrset(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBPSD_3 b);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrset")]
public static extern short cnc_wrset(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBPSD_4 b);
/* read setting data(area specified) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdsetr")]
public static extern short cnc_rdsetr(ushort FlibHndl,
ref short a, short b, ref short c, ref short d, [Out, MarshalAs(UnmanagedType.AsAny)] Object e);
/* write setting data(area specified) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrsets")]
public static extern short cnc_wrsets(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.AsAny)] Object b);
/* read parameters */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdparam_ext")]
public static extern short cnc_rdparam_ext(ushort FlibHndl,
[In, Out, MarshalAs(UnmanagedType.LPStruct)] IODBPRMNO a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBPRM c);
/* read parameter */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdparam3")]
public static extern short cnc_rdparam3(ushort FlibHndl,
short a, short b, short c, short d, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBPSD_1 e);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdparam3")]
public static extern short cnc_rdparam3(ushort FlibHndl,
short a, short b, short c, short d, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBPSD_2 e);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdparam3")]
public static extern short cnc_rdparam3(ushort FlibHndl,
short a, short b, short c, short d, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBPSD_3 e);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdparam3")]
public static extern short cnc_rdparam3(ushort FlibHndl,
short a, short b, short c, short d, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBPSD_4 e);
/* async parameter write start */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_start_async_wrparam")]
public static extern short cnc_start_async_wrparam(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBPRM a);
/* async parameter write end */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_end_async_wrparam")]
public static extern short cnc_end_async_wrparam(ushort FlibHndl, out short a);
/* read cause of busy for async parameter write */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_async_busy_state")]
public static extern short cnc_async_busy_state(ushort FlibHndl, out short a);
/* read diagnosis data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rddiag_ext")]
public static extern short cnc_rddiag_ext(ushort FlibHndl,
[In, Out, MarshalAs(UnmanagedType.LPStruct)] IODBPRMNO a, short b, [In, MarshalAs(UnmanagedType.LPStruct)] IODBPRM c);
/* read pitch error compensation data(area specified) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdpitchr")]
public static extern short cnc_rdpitchr(ushort FlibHndl,
short a, short b, short c, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBPI d);
/* write pitch error compensation data(area specified) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrpitchr")]
public static extern short cnc_wrpitchr(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBPI b);
/* read custom macro variable */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdmacro")]
public static extern short cnc_rdmacro(ushort FlibHndl, short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBM c);
/* write custom macro variable */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrmacro")]
public static extern short cnc_wrmacro(ushort FlibHndl, short a, short b, int c, short d);
/* read custom macro variables(area specified) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdmacror")]
public static extern short cnc_rdmacror(ushort FlibHndl,
short a, short b, short c, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBMR d);
/* write custom macro variables(area specified) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrmacror")]
public static extern short cnc_wrmacror(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBMR b);
/* read custom macro variables(IEEE double version) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdmacror2")]
public static extern short cnc_rdmacror2(ushort FlibHndl, int a, ref int b, [Out, MarshalAs(UnmanagedType.AsAny)] Object c);
/* write custom macro variables(IEEE double version) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrmacror2")]
public static extern short cnc_wrmacror2(ushort FlibHndl, int a, ref int b, [In, MarshalAs(UnmanagedType.AsAny)] Object c);
/* read P code macro variable */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdpmacro")]
public static extern short cnc_rdpmacro(ushort FlibHndl, int a, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBPM b);
/* write P code macro variable */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrpmacro")]
public static extern short cnc_wrpmacro(ushort FlibHndl, int a, int b, short c);
/* read P code macro variables(area specified) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdpmacror")]
public static extern short cnc_rdpmacror(ushort FlibHndl,
int a, int b, ushort c, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBPR d);
/* write P code macro variables(area specified) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrpmacror")]
public static extern short cnc_wrpmacror(ushort FlibHndl, ushort a, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBPR b);
/* read P code macro variables(IEEE double version) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdpmacror2")]
public static extern short cnc_rdpmacror2(ushort FlibHndl, uint a, ref uint b, ushort c, [Out, MarshalAs(UnmanagedType.AsAny)] Object d);
/* write P code macro variables(IEEE double version) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrpmacror2")]
public static extern short cnc_wrpmacror2(ushort FlibHndl, uint a, ref uint b, ushort c, [In, MarshalAs(UnmanagedType.AsAny)] Object d);
/* read tool offset information */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdtofsinfo")]
public static extern short cnc_rdtofsinfo(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBTLINF a);
/* read tool offset information(2) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdtofsinfo2")]
public static extern short cnc_rdtofsinfo2(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBTLINF2 a);
/* read work zero offset information */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdzofsinfo")]
public static extern short cnc_rdzofsinfo(ushort FlibHndl, out short a);
/* read pitch error compensation data information */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdpitchinfo")]
public static extern short cnc_rdpitchinfo(ushort FlibHndl, out short a);
/* read custom macro variable information */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdmacroinfo")]
public static extern short cnc_rdmacroinfo(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBMVINF a);
/* read P code macro variable information */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdpmacroinfo")]
public static extern short cnc_rdpmacroinfo(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBPMINF a);
/* read validity of tool offset */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_tofs_rnge")]
public static extern short cnc_tofs_rnge(ushort FlibHndl, short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBDATRNG c);
/* read validity of work zero offset */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_zofs_rnge")]
public static extern short cnc_zofs_rnge(ushort FlibHndl, short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBDATRNG c);
/* read validity of work zero offset */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wksft_rnge")]
public static extern short cnc_wksft_rnge(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBDATRNG b);
/* read the information for function cnc_rdhsparam() */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdhsprminfo")]
public static extern short cnc_rdhsprminfo(ushort FlibHndl, int a, [Out, MarshalAs(UnmanagedType.LPStruct)] HSPINFO_data b);
/* read parameters at the high speed */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdhsparam")]
public static extern short cnc_rdhsparam(ushort FlibHndl, int a, [In, MarshalAs(UnmanagedType.LPStruct)] HSPINFO b, [Out, MarshalAs(UnmanagedType.LPStruct)] HSPDATA_1 c);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdhsparam")]
public static extern short cnc_rdhsparam(ushort FlibHndl, int a, [In, MarshalAs(UnmanagedType.LPStruct)] HSPINFO b, [Out, MarshalAs(UnmanagedType.LPStruct)] HSPDATA_2 c);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdhsparam")]
public static extern short cnc_rdhsparam(ushort FlibHndl, int a, [In, MarshalAs(UnmanagedType.LPStruct)] HSPINFO b, [Out, MarshalAs(UnmanagedType.LPStruct)] HSPDATA_3 c);
/*----------------------------------------*/
/* CNC: Tool life management data related */
/*----------------------------------------*/
/* read tool life management data(tool group number) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdgrpid")]
public static extern short cnc_rdgrpid(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBTLIFE1 b);
/* read tool life management data(number of tool groups) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdngrp")]
public static extern short cnc_rdngrp(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBTLIFE2 a);
/* read tool life management data(number of tools) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdntool")]
public static extern short cnc_rdntool(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBTLIFE3 b);
/* read tool life management data(tool life) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdlife")]
public static extern short cnc_rdlife(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBTLIFE3 b);
/* read tool life management data(tool lift counter) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdcount")]
public static extern short cnc_rdcount(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBTLIFE3 b);
/* read tool life management data(tool length number-1) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rd1length")]
public static extern short cnc_rd1length(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBTLIFE4 c);
/* read tool life management data(tool length number-2) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rd2length")]
public static extern short cnc_rd2length(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBTLIFE4 c);
/* read tool life management data(cutter compensation no.-1) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rd1radius")]
public static extern short cnc_rd1radius(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBTLIFE4 c);
/* read tool life management data(cutter compensation no.-2) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rd2radius")]
public static extern short cnc_rd2radius(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBTLIFE4 c);
/* read tool life management data(tool information-1) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_t1info")]
public static extern short cnc_t1info(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBTLIFE4 c);
/* read tool life management data(tool information-2) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_t2info")]
public static extern short cnc_t2info(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBTLIFE4 c);
/* read tool life management data(tool number) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_toolnum")]
public static extern short cnc_toolnum(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBTLIFE4 c);
/* read tool life management data(tool number, tool life, tool life counter)(area specified) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdtoolrng")]
public static extern short cnc_rdtoolrng(ushort FlibHndl,
short a, short b, short c, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBTR d);
/* read tool life management data(all data within group) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdtoolgrp")]
public static extern short cnc_rdtoolgrp(ushort FlibHndl, short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBTG c);
/* write tool life management data(tool life counter) (area specified) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrcountr")]
public static extern short cnc_wrcountr(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IDBWRC b);
/* read tool life management data(used tool group number) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdusegrpid")]
public static extern short cnc_rdusegrpid(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBUSEGR a);
/* read tool life management data(max. number of tool groups) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdmaxgrp")]
public static extern short cnc_rdmaxgrp(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBLFNO a);
/* read tool life management data(maximum number of tool within group) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdmaxtool")]
public static extern short cnc_rdmaxtool(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBLFNO a);
/* read tool life management data(used tool no. within group) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdusetlno")]
public static extern short cnc_rdusetlno(ushort FlibHndl,
short a, short b, short c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBTLUSE d);
/* read tool life management data(tool data1) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rd1tlifedata")]
public static extern short cnc_rd1tlifedata(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBTD c);
/* read tool life management data(tool data2) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rd2tlifedata")]
public static extern short cnc_rd2tlifedata(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBTD c);
/* write tool life management data(tool data1) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wr1tlifedata")]
public static extern short cnc_wr1tlifedata(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBTD a);
/* write tool life management data(tool data2) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wr2tlifedata")]
public static extern short cnc_wr2tlifedata(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBTD a);
/* read tool life management data(tool group information) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdgrpinfo")]
public static extern short cnc_rdgrpinfo(ushort FlibHndl,
short a, short b, short c, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBTGI d);
/* read tool life management data(tool group information 2) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdgrpinfo2")]
public static extern short cnc_rdgrpinfo2(ushort FlibHndl,
short a, short b, short c, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBTGI2 d);
/* read tool life management data(tool group information 3) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdgrpinfo3")]
public static extern short cnc_rdgrpinfo3(ushort FlibHndl,
short a, short b, short c, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBTGI3 d);
/* read tool life management data(tool group information 4) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdgrpinfo4")]
public static extern short cnc_rdgrpinfo4(ushort FlibHndl,
short a, short b, short c, out short d, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBTGI4 e);
/* write tool life management data(tool group information) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrgrpinfo")]
public static extern short cnc_wrgrpinfo(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBTGI b);
/* write tool life management data(tool group information 2) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrgrpinfo2")]
public static extern short cnc_wrgrpinfo2(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBTGI2 b);
/* write tool life management data(tool group information 3) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrgrpinfo3")]
public static extern short cnc_wrgrpinfo3(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBTGI3 b);
/* delete tool life management data(tool group) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_deltlifegrp")]
public static extern short cnc_deltlifegrp(ushort FlibHndl, short a);
/* insert tool life management data(tool data) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_instlifedt")]
public static extern short cnc_instlifedt(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IDBITD a);
/* delete tool life management data(tool data) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_deltlifedt")]
public static extern short cnc_deltlifedt(ushort FlibHndl, short a, short b);
/* clear tool life management data(tool life counter, tool information)(area specified) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_clrcntinfo")]
public static extern short cnc_clrcntinfo(ushort FlibHndl, short a, short b);
/* read tool life management data(tool group number) 2 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdgrpid2")]
public static extern short cnc_rdgrpid2(ushort FlibHndl, int a, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBTLIFE5 b);
/* read tool life management data(tool data1) 2 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rd1tlifedat2")]
public static extern short cnc_rd1tlifedat2(ushort FlibHndl,
short a, int b, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBTD2 c);
/* write tool life management data(tool data1) 2 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wr1tlifedat2")]
public static extern short cnc_wr1tlifedat2(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBTD2 a);
/* read tool life management data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdtlinfo")]
public static extern short cnc_rdtlinfo(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBTLINFO a);
/* read tool life management data(used tool group number) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdtlusegrp")]
public static extern short cnc_rdtlusegrp(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBUSEGRP a);
/* read tool life management data(tool group information 2) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdtlgrp")]
public static extern short cnc_rdtlgrp(ushort FlibHndl,
int a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBTLGRP c);
/* read tool life management data (tool data1) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdtltool")]
public static extern short cnc_rdtltool(ushort FlibHndl,
int a, int b, ref short c, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBTLTOOL d);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdexchgtgrp")]
public static extern short cnc_rdexchgtgrp(ushort FlibHndl,
ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBEXGP c);
/*-----------------------------------*/
/* CNC: Tool management data related */
/*-----------------------------------*/
/* new registration of tool management data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_regtool")]
public static extern short cnc_regtool(ushort FlibHndl,
short a, ref short b, [In, MarshalAs(UnmanagedType.LPStruct)] IODBTLMNG c);
/* new registration of tool management data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_regtool_f2")]
public static extern short cnc_regtool_f2(ushort FlibHndl,
short a, ref short b, [In, MarshalAs(UnmanagedType.LPStruct)] IODBTLMNG_F2 c);
/* deletion of tool management data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_deltool")]
public static extern short cnc_deltool(ushort FlibHndl, short a, ref short b);
/* lead of tool management data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdtool")]
public static extern short cnc_rdtool(ushort FlibHndl,
short a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBTLMNG c);
/* lead of tool management data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdtool_f2")]
public static extern short cnc_rdtool_f2(ushort FlibHndl,
short a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBTLMNG_F2 c);
/* write of tool management data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrtool")]
public static extern short cnc_wrtool(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBTLMNG b);
/* write of individual data of tool management data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrtool2")]
public static extern short cnc_wrtool2(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IDBTLM b);
/* write tool management data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrtool_f2")]
public static extern short cnc_wrtool_f2(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBTLMNG_F2_data b);
/* new registration of magazine management data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_regmagazine")]
public static extern short cnc_regmagazine(ushort FlibHndl, ref short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBTLMAG b);
/* deletion of magazine management data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_delmagazine")]
public static extern short cnc_delmagazine(ushort FlibHndl, ref short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBTLMAG2 b);
/* lead of magazine management data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdmagazine")]
public static extern short cnc_rdmagazine(ushort FlibHndl, ref short a, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBTLMAG b);
/* Individual write of magazine management data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrmagazine")]
public static extern short cnc_wrmagazine(ushort FlibHndl, short a, short b, short c);
/*-------------------------------------*/
/* CNC: Operation history data related */
/*-------------------------------------*/
/* stop logging operation history data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_stopophis")]
public static extern short cnc_stopophis(ushort FlibHndl);
/* restart logging operation history data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_startophis")]
public static extern short cnc_startophis(ushort FlibHndl);
/* read number of operation history data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdophisno")]
public static extern short cnc_rdophisno(ushort FlibHndl, out ushort a);
/* read operation history data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdophistry")]
public static extern short cnc_rdophistry(ushort FlibHndl,
ushort a, ushort b, ushort c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBHIS d);
/* read operation history data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdophistry2")]
public static extern short cnc_rdophistry2(ushort FlibHndl,
ushort a, ref ushort b, ref ushort c, [Out, MarshalAs(UnmanagedType.AsAny)] Object d);
/* read operation history data F30i*/
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdophistry4")]
public static extern short cnc_rdophistry4(ushort FlibHndl,
ushort a, ref ushort b, ref ushort c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBOPHIS4_1 d);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdophistry4")]
public static extern short cnc_rdophistry4(ushort FlibHndl,
ushort a, ref ushort b, ref ushort c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBOPHIS4_2 d);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdophistry4")]
public static extern short cnc_rdophistry4(ushort FlibHndl,
ushort a, ref ushort b, ref ushort c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBOPHIS4_3 d);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdophistry4")]
public static extern short cnc_rdophistry4(ushort FlibHndl,
ushort a, ref ushort b, ref ushort c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBOPHIS4_4 d);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdophistry4")]
public static extern short cnc_rdophistry4(ushort FlibHndl,
ushort a, ref ushort b, ref ushort c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBOPHIS4_5 d);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdophistry4")]
public static extern short cnc_rdophistry4(ushort FlibHndl,
ushort a, ref ushort b, ref ushort c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBOPHIS4_6 d);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdophistry4")]
public static extern short cnc_rdophistry4(ushort FlibHndl,
ushort a, ref ushort b, ref ushort c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBOPHIS4_7 d);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdophistry4")]
public static extern short cnc_rdophistry4(ushort FlibHndl,
ushort a, ref ushort b, ref ushort c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBOPHIS4_8 d);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdophistry4")]
public static extern short cnc_rdophistry4(ushort FlibHndl,
ushort a, ref ushort b, ref ushort c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBOPHIS4_9 d);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdophistry4")]
public static extern short cnc_rdophistry4(ushort FlibHndl,
ushort a, ref ushort b, ref ushort c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBOPHIS4_10 d);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdophistry4")]
public static extern short cnc_rdophistry4(ushort FlibHndl,
ushort a, ref ushort b, ref ushort c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBOPHIS4_11 d);
/* read number of alarm history data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdalmhisno")]
public static extern short cnc_rdalmhisno(ushort FlibHndl, out ushort a);
/* read alarm history data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdalmhistry")]
public static extern short cnc_rdalmhistry(ushort FlibHndl,
ushort a, ushort b, ushort c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBAHIS d);
/* read alarm history data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdalmhistry_w")]
public static extern short cnc_rdalmhistry_w(ushort FlibHndl,
ushort a, ushort b, ushort c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBAHIS d);
/* read alarm history data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdalmhistry2")]
public static extern short cnc_rdalmhistry2(ushort FlibHndl,
ushort a, ushort b, ushort c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBAHIS2 d);
/* read alarm history data F30i*/
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdalmhistry3")]
public static extern short cnc_rdalmhistry3(ushort FlibHndl,
ushort a, ushort b, ushort c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBAHIS3 d);
/* read alarm history data F30i*/
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdalmhistry5")]
public static extern short cnc_rdalmhistry5(ushort FlibHndl,
ushort a, ushort b, ushort c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBAHIS5 d);
/* clear operation history data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_clearophis")]
public static extern short cnc_clearophis(ushort FlibHndl, short a);
/* read signals related operation history */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdhissgnl")]
public static extern short cnc_rdhissgnl(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBSIG a);
/* read signals related operation history 2 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdhissgnl2")]
public static extern short cnc_rdhissgnl2(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBSIG2 a);
/* read signals related operation history 3 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdhissgnl3")]
public static extern short cnc_rdhissgnl3(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBSIG3 a);
/* write signals related operation history */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrhissgnl")]
public static extern short cnc_wrhissgnl(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBSIG a);
/* write signals related operation history 2 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrhissgnl2")]
public static extern short cnc_wrhissgnl2(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBSIG2 a);
/* write signals related operation history for F30i*/
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrhissgnl3")]
public static extern short cnc_wrhissgnl3(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBSIG3 a);
/* read number of operater message history data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdomhisno")]
public static extern short cnc_rdomhisno(ushort FlibHndl, out ushort a);
/*-------------*/
/* CNC: Others */
/*-------------*/
/* read CNC system information */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_sysinfo")]
public static extern short cnc_sysinfo(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBSYS a);
/* read CNC status information */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_statinfo")]
public static extern short cnc_statinfo(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBST a);
/* read alarm status */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_alarm")]
public static extern short cnc_alarm(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBALM a);
/* read alarm status */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_alarm2")]
public static extern short cnc_alarm2(ushort FlibHndl, out int a);
/* read alarm information */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdalminfo")]
public static extern short cnc_rdalminfo(ushort FlibHndl,
short a, short b, short c, [Out, MarshalAs(UnmanagedType.LPStruct)] ALMINFO_1 d);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdalminfo")]
public static extern short cnc_rdalminfo(ushort FlibHndl,
short a, short b, short c, [Out, MarshalAs(UnmanagedType.LPStruct)] ALMINFO_2 d);
/* read alarm message */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdalmmsg")]
public static extern short cnc_rdalmmsg(ushort FlibHndl,
short a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBALMMSG c);
/* read alarm message(2) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdalmmsg2")]
public static extern short cnc_rdalmmsg2(ushort FlibHndl,
short a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBALMMSG2 c);
/* clear CNC alarm */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_clralm")]
public static extern short cnc_clralm(ushort FlibHndl, short a);
/* read modal data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_modal")]
public static extern short cnc_modal(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBMDL_1 c);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_modal")]
public static extern short cnc_modal(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBMDL_2 c);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_modal")]
public static extern short cnc_modal(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBMDL_3 c);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_modal")]
public static extern short cnc_modal(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBMDL_4 c);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_modal")]
public static extern short cnc_modal(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBMDL_5 c);
/* read G code */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdgcode")]
public static extern short cnc_rdgcode(ushort FlibHndl,
short a, short b, ref short c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBGCD d);
/* read command value */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdcommand")]
public static extern short cnc_rdcommand(ushort FlibHndl,
short a, short b, ref short c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBCMD d);
/* read diagnosis data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_diagnoss")]
public static extern short cnc_diagnoss(ushort FlibHndl,
short a, short b, short c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBDGN_1 d);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_diagnoss")]
public static extern short cnc_diagnoss(ushort FlibHndl,
short a, short b, short c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBDGN_2 d);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_diagnoss")]
public static extern short cnc_diagnoss(ushort FlibHndl,
short a, short b, short c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBDGN_3 d);
[DllImport("FWLIB32.dll", EntryPoint = "cnc_diagnoss")]
public static extern short cnc_diagnoss(ushort FlibHndl,
short a, short b, short c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBDGN_4 d);
/* read diagnosis data(area specified) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_diagnosr")]
public static extern short cnc_diagnosr(ushort FlibHndl,
ref short a, short b, ref short c, ref short d, [Out, MarshalAs(UnmanagedType.AsAny)] Object e);
// [DllImport("FWLIB32.dll", EntryPoint="cnc_diagnosr")]
// public static extern short cnc_diagnosr( ushort FlibHndl,
// ref short a, short b, ref short c, ref short d, [Out,MarshalAs(UnmanagedType.LPStruct)] ODBDGN e );
/* read A/D conversion data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_adcnv")]
public static extern short cnc_adcnv(ushort FlibHndl, short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBAD c);
/* read operator's message */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdopmsg")]
public static extern short cnc_rdopmsg(ushort FlibHndl, short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] OPMSG c);
/* read operator's message */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdopmsg2")]
public static extern short cnc_rdopmsg2(ushort FlibHndl, short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] OPMSG2 c);
/* read operator's message */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdopmsg3")]
public static extern short cnc_rdopmsg3(ushort FlibHndl,
short a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] OPMSG3 c);
/* set path number(for 4 axes lathes, multi-path) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_setpath")]
public static extern short cnc_setpath(ushort FlibHndl, short a);
/* get path number(for 4 axes lathes, multi-path) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_getpath")]
public static extern short cnc_getpath(ushort FlibHndl, out short a, out short b);
/* allocate library handle */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_allclibhndl")]
public static extern short cnc_allclibhndl(out ushort FlibHndl);
/* free library handle */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_freelibhndl")]
public static extern short cnc_freelibhndl(ushort FlibHndl);
/* get library option */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_getlibopt")]
public static extern short cnc_getlibopt(ushort FlibHndl, int a, [Out, MarshalAs(UnmanagedType.AsAny)] Object b, ref int c);
/* set library option */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_setlibopt")]
public static extern short cnc_setlibopt(ushort FlibHndl, int a, [In, MarshalAs(UnmanagedType.AsAny)] Object b, int c);
/* get custom macro type */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_getmactype")]
public static extern short cnc_getmactype(ushort FlibHndl, out short a);
/* set custom macro type */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_setmactype")]
public static extern short cnc_setmactype(ushort FlibHndl, short a);
/* get P code macro type */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_getpmactype")]
public static extern short cnc_getpmactype(ushort FlibHndl, out short a);
/* set P code macro type */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_setpmactype")]
public static extern short cnc_setpmactype(ushort FlibHndl, short a);
/* get screen status */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_getcrntscrn")]
public static extern short cnc_getcrntscrn(ushort FlibHndl, out short a);
/* change screen mode */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_slctscrn")]
public static extern short cnc_slctscrn(ushort FlibHndl, short a);
/* read CNC configuration information */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_sysconfig")]
public static extern short cnc_sysconfig(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBSYSC a);
/* read program restart information */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdprstrinfo")]
public static extern short cnc_rdprstrinfo(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBPRS a);
/* search sequence number for program restart */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rstrseqsrch")]
public static extern short cnc_rstrseqsrch(ushort FlibHndl, int a, int b, short c, short d);
/* search sequence number for program restart 2 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rstrseqsrch2")]
public static extern short cnc_rstrseqsrch2(ushort FlibHndl, int a, int b, short c, short d, int e);
/* read output signal image of software operator's panel */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdopnlsgnl")]
public static extern short cnc_rdopnlsgnl(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBSGNL b);
/* write output signal of software operator's panel */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wropnlsgnl")]
public static extern short cnc_wropnlsgnl(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBSGNL a);
/* read general signal image of software operator's panel */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdopnlgnrl")]
public static extern short cnc_rdopnlgnrl(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBGNRL b);
/* write general signal image of software operator's panel */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wropnlgnrl")]
public static extern short cnc_wropnlgnrl(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBGNRL a);
/* read general signal name of software operator's panel */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdopnlgsname")]
public static extern short cnc_rdopnlgsname(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBRDNA b);
/* write general signal name of software operator's panel */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wropnlgsname")]
public static extern short cnc_wropnlgsname(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBRDNA a);
/* get detail error */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_getdtailerr")]
public static extern short cnc_getdtailerr(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBERR a);
/* read informations of CNC parameter */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdparainfo")]
public static extern short cnc_rdparainfo(ushort FlibHndl,
short a, ushort b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBPARAIF c);
/* read informations of CNC setting data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdsetinfo")]
public static extern short cnc_rdsetinfo(ushort FlibHndl,
short a, ushort b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBSETIF c);
/* read informations of CNC diagnose data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rddiaginfo")]
public static extern short cnc_rddiaginfo(ushort FlibHndl,
short a, ushort b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBDIAGIF c);
/* read maximum, minimum and total number of CNC parameter */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdparanum")]
public static extern short cnc_rdparanum(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBPARANUM a);
/* read maximum, minimum and total number of CNC setting data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdsetnum")]
public static extern short cnc_rdsetnum(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBSETNUM a);
/* read maximum, minimum and total number of CNC diagnose data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rddiagnum")]
public static extern short cnc_rddiagnum(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBDIAGNUM a);
/* get maximum valid figures and number of decimal places */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_getfigure")]
public static extern short cnc_getfigure(ushort FlibHndl,
short a, out short b, [Out, MarshalAs(UnmanagedType.AsAny)] Object c, [Out, MarshalAs(UnmanagedType.AsAny)] Object d);
/* read F-ROM information on CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdfrominfo")]
public static extern short cnc_rdfrominfo(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBFINFO b);
/* start of reading F-ROM data from CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_fromsvstart")]
public static extern short cnc_fromsvstart(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.AsAny)] Object b, int c);
/* read F-ROM data from CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_fromsave")]
public static extern short cnc_fromsave(ushort FlibHndl, out short a, [Out, MarshalAs(UnmanagedType.AsAny)] Object b, ref int c);
/* end of reading F-ROM data from CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_fromsvend")]
public static extern short cnc_fromsvend(ushort FlibHndl);
/* start of writing F-ROM data to CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_fromldstart")]
public static extern short cnc_fromldstart(ushort FlibHndl, short a, int b);
/* write F-ROM data to CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_fromload")]
public static extern short cnc_fromload(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a, ref int b);
/* end of writing F-ROM data to CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_fromldend")]
public static extern short cnc_fromldend(ushort FlibHndl);
/* delete F-ROM data on CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_fromdelete")]
public static extern short cnc_fromdelete(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.AsAny)] Object b, int c);
/* read S-RAM information on CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdsraminfo")]
public static extern short cnc_rdsraminfo(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBSINFO a);
/* start of reading S-RAM data from CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_srambkstart")]
public static extern short cnc_srambkstart(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a, int b);
/* read S-RAM data from CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_srambackup")]
public static extern short cnc_srambackup(ushort FlibHndl, out short a, [Out, MarshalAs(UnmanagedType.AsAny)] Object b, ref int c);
/* end of reading S-RAM data from CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_srambkend")]
public static extern short cnc_srambkend(ushort FlibHndl);
/* read F-ROM information on CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_getfrominfo")]
public static extern short cnc_getfrominfo(ushort FlibHndl,
short a, out short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBFINFORM c);
/* start of reading F-ROM data from CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_fromgetstart")]
public static extern short cnc_fromgetstart(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.AsAny)] Object b);
/* read F-ROM data from CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_fromget")]
public static extern short cnc_fromget(ushort FlibHndl, out short a, [Out, MarshalAs(UnmanagedType.AsAny)] Object b, ref int c);
/* end of reading F-ROM data from CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_fromgetend")]
public static extern short cnc_fromgetend(ushort FlibHndl);
/* start of writing F-ROM data to CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_fromputstart")]
public static extern short cnc_fromputstart(ushort FlibHndl, short a);
/* write F-ROM data to CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_fromput")]
public static extern short cnc_fromput(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a, ref int b);
/* end of writing F-ROM data to CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_fromputend")]
public static extern short cnc_fromputend(ushort FlibHndl);
/* delete F-ROM data on CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_fromremove")]
public static extern short cnc_fromremove(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.AsAny)] Object b);
/* read S-RAM information on CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_getsraminfo")]
public static extern short cnc_getsraminfo(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBSINFO a);
/* start of reading S-RAM data from CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_sramgetstart")]
public static extern short cnc_sramgetstart(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* start of reading S-RAM data from CNC (2) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_sramgetstart2")]
public static extern short cnc_sramgetstart2(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* read S-RAM data from CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_sramget")]
public static extern short cnc_sramget(ushort FlibHndl, out short a, [Out, MarshalAs(UnmanagedType.AsAny)] Object b, ref int c);
/* read S-RAM data from CNC (2) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_sramget2")]
public static extern short cnc_sramget2(ushort FlibHndl, out short a, [Out, MarshalAs(UnmanagedType.AsAny)] Object b, ref int c);
/* end of reading S-RAM data from CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_sramgetend")]
public static extern short cnc_sramgetend(ushort FlibHndl);
/* end of reading S-RAM data from CNC (2) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_sramgetend2")]
public static extern short cnc_sramgetend2(ushort FlibHndl);
/* read number of S-RAM data kind on CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdsramnum")]
public static extern short cnc_rdsramnum(ushort FlibHndl, out short a);
/* read S-RAM data address information on CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdsramaddr")]
public static extern short cnc_rdsramaddr(ushort FlibHndl, out short a, [Out, MarshalAs(UnmanagedType.LPStruct)] SRAMADDR b);
/* get current NC data protection information */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_getlockstat")]
public static extern short cnc_getlockstat(ushort FlibHndl, short a, out byte b);
/* change NC data protection status */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_chgprotbit")]
public static extern short cnc_chgprotbit(ushort FlibHndl, short a, ref byte b, int c);
/* transfer a file from host computer to CNC by FTP */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dtsvftpget")]
public static extern short cnc_dtsvftpget(ushort FlibHndl,
[In, MarshalAs(UnmanagedType.AsAny)] Object a, [In, MarshalAs(UnmanagedType.AsAny)] Object b);
/* transfer a file from CNC to host computer by FTP */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dtsvftpput")]
public static extern short cnc_dtsvftpput(ushort FlibHndl,
[In, MarshalAs(UnmanagedType.AsAny)] Object a, [In, MarshalAs(UnmanagedType.AsAny)] Object b);
/* get transfer status for FTP */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dtsvftpstat")]
public static extern short cnc_dtsvftpstat(ushort FlibHndl);
/* read file directory in Data Server */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dtsvrdpgdir")]
public static extern short cnc_dtsvrdpgdir(ushort FlibHndl,
[In, MarshalAs(UnmanagedType.AsAny)] Object a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBDSDIR c);
/* delete files in Data Server */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dtsvdelete")]
public static extern short cnc_dtsvdelete(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* down load from CNC (transfer a file from CNC to MMC) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dtsvdownload")]
public static extern short cnc_dtsvdownload(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* up load to CNC (transfer a file from MMC to CNC) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dtsvupload")]
public static extern short cnc_dtsvupload(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* close upload/download between Data Server and CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dtsvcnclupdn")]
public static extern short cnc_dtsvcnclupdn(ushort FlibHndl);
/* get transfer status for up/down load */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dtsvupdnstat")]
public static extern short cnc_dtsvupdnstat(ushort FlibHndl);
/* get file name for DNC operation in Data Server */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dtsvgetdncpg")]
public static extern short cnc_dtsvgetdncpg(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.AsAny)] Object a);
/* set program number of DNC oparation to CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dtsvsetdncpg")]
public static extern short cnc_dtsvsetdncpg(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* read setting data for Data Server */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dtsvrdset")]
public static extern short cnc_dtsvrdset(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBDSSET a);
/* write setting data for Data Server */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dtsvwrset")]
public static extern short cnc_dtsvwrset(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBDSSET a);
/* check hard disk in Data Server */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dtsvchkdsk")]
public static extern short cnc_dtsvchkdsk(ushort FlibHndl);
/* format hard disk in Data Server */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dtsvhdformat")]
public static extern short cnc_dtsvhdformat(ushort FlibHndl);
/* save interface area in Data Server */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dtsvsavecram")]
public static extern short cnc_dtsvsavecram(ushort FlibHndl);
/* get interface area in Data Server */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dtsvrdcram")]
public static extern short cnc_dtsvrdcram(ushort FlibHndl, int a, ref int b, [Out, MarshalAs(UnmanagedType.AsAny)] Object c);
/* read maintenance information for Data Server */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dtsvmntinfo")]
public static extern short cnc_dtsvmntinfo(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBDSMNT a);
/* get Data Server mode */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dtsvgetmode")]
public static extern short cnc_dtsvgetmode(ushort FlibHndl, out short a);
/* set Data Server mode */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dtsvsetmode")]
public static extern short cnc_dtsvsetmode(ushort FlibHndl, short a);
/* read error message for Data Server */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dtsvrderrmsg")]
public static extern short cnc_dtsvrderrmsg(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.AsAny)] Object b);
/* transfar file from Pc to Data Server */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dtsvwrfile")]
public static extern short cnc_dtsvwrfile(ushort FlibHndl,
[In, MarshalAs(UnmanagedType.AsAny)] Object a, [In, MarshalAs(UnmanagedType.AsAny)] Object b, short c);
/* transfar file from Data Server to Pc */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dtsvrdfile")]
public static extern short cnc_dtsvrdfile(ushort FlibHndl,
[In, MarshalAs(UnmanagedType.AsAny)] Object a, [In, MarshalAs(UnmanagedType.AsAny)] Object b, short c);
/* read the loop gain for each axis */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdloopgain")]
public static extern short cnc_rdloopgain(ushort FlibHndl, out int a);
/* read the actual current for each axis */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdcurrent")]
public static extern short cnc_rdcurrent(ushort FlibHndl, out short a);
/* read the actual speed for each axis */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdsrvspeed")]
public static extern short cnc_rdsrvspeed(ushort FlibHndl, out int a);
/* read the operation mode */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdopmode")]
public static extern short cnc_rdopmode(ushort FlibHndl, out short a);
/* read the position deviation S */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdposerrs")]
public static extern short cnc_rdposerrs(ushort FlibHndl, out int a);
/* read the position deviation S1 and S2 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdposerrs2")]
public static extern short cnc_rdposerrs2(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBPSER a);
/* read the position deviation Z in the rigid tap mode */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdposerrz")]
public static extern short cnc_rdposerrz(ushort FlibHndl, out int a);
/* read the synchronous error in the synchronous control mode */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdsynerrsy")]
public static extern short cnc_rdsynerrsy(ushort FlibHndl, out int a);
/* read the synchronous error in the rigid tap mode */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdsynerrrg")]
public static extern short cnc_rdsynerrrg(ushort FlibHndl, out int a);
/* read the spindle alarm */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdspdlalm")]
public static extern short cnc_rdspdlalm(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.AsAny)] Object a);
/* read the control input signal */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdctrldi")]
public static extern short cnc_rdctrldi(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBSPDI a);
/* read the control output signal */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdctrldo")]
public static extern short cnc_rdctrldo(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBSPDO a);
/* read the number of controled spindle */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdnspdl")]
public static extern short cnc_rdnspdl(ushort FlibHndl, out short a);
/* read data from FANUC BUS */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdfbusmem")]
public static extern short cnc_rdfbusmem(ushort FlibHndl,
short a, short b, int c, int d, [Out, MarshalAs(UnmanagedType.AsAny)] Object e);
/* write data to FANUC BUS */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrfbusmem")]
public static extern short cnc_wrfbusmem(ushort FlibHndl,
short a, short b, int c, int d, [In, MarshalAs(UnmanagedType.AsAny)] Object e);
/* read the parameter of wave diagnosis */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdwaveprm")]
public static extern short cnc_rdwaveprm(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBWAVE a);
/* write the parameter of wave diagnosis */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrwaveprm")]
public static extern short cnc_wrwaveprm(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBWAVE a);
/* read the parameter of wave diagnosis 2 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdwaveprm2")]
public static extern short cnc_rdwaveprm2(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBWVPRM a);
/* write the parameter of wave diagnosis 2 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrwaveprm2")]
public static extern short cnc_wrwaveprm2(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBWVPRM a);
/* start the sampling for wave diagnosis */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wavestart")]
public static extern short cnc_wavestart(ushort FlibHndl);
/* stop the sampling for wave diagnosis */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wavestop")]
public static extern short cnc_wavestop(ushort FlibHndl);
/* read the status of wave diagnosis */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wavestat")]
public static extern short cnc_wavestat(ushort FlibHndl, out short a);
/* read the data of wave diagnosis */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdwavedata")]
public static extern short cnc_rdwavedata(ushort FlibHndl,
short a, short b, int c, ref int d, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBWVDT e);
/* read the parameter of wave diagnosis for remort diagnosis */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdrmtwaveprm")]
public static extern short cnc_rdrmtwaveprm(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBRMTPRM a, short b);
/* write the parameter of wave diagnosis for remort diagnosis */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrrmtwaveprm")]
public static extern short cnc_wrrmtwaveprm(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBRMTPRM a);
/* start the sampling for wave diagnosis for remort diagnosis */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rmtwavestart")]
public static extern short cnc_rmtwavestart(ushort FlibHndl);
/* stop the sampling for wave diagnosis for remort diagnosis */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rmtwavestop")]
public static extern short cnc_rmtwavestop(ushort FlibHndl);
/* read the status of wave diagnosis for remort diagnosis*/
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rmtwavestat")]
public static extern short cnc_rmtwavestat(ushort FlibHndl, out short a);
/* read the data of wave diagnosis for remort diagnosis */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdrmtwavedt")]
public static extern short cnc_rdrmtwavedt(ushort FlibHndl,
short a, int b, ref int c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBRMTDT d);
/* read of address for PMC signal batch save */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdsavsigadr")]
public static extern short cnc_rdsavsigadr(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBSIGAD a, short b);
/* write of address for PMC signal batch save */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrsavsigadr")]
public static extern short cnc_wrsavsigadr(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBSIGAD a, out short b);
/* read of data for PMC signal batch save */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdsavsigdata")]
public static extern short cnc_rdsavsigdata(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.AsAny)] Object c, ref short d);
/* read M-code group data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdmgrpdata")]
public static extern short cnc_rdmgrpdata(ushort FlibHndl,
short a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBMGRP c);
/* write M-code group data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrmgrpdata")]
public static extern short cnc_wrmgrpdata(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IDBMGRP a);
/* read executing M-code group data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdexecmcode")]
public static extern short cnc_rdexecmcode(ushort FlibHndl,
short a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBEXEM c);
/* read program restart M-code group data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdrstrmcode")]
public static extern short cnc_rdrstrmcode(ushort FlibHndl,
short a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBRSTRM c);
/* read processing time stamp data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdproctime")]
public static extern short cnc_rdproctime(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBPTIME a);
/* read MDI program stat */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdmdiprgstat")]
public static extern short cnc_rdmdiprgstat(ushort FlibHndl, out ushort a);
/* read program directory for processing time data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdprgdirtime")]
public static extern short cnc_rdprgdirtime(ushort FlibHndl,
ref int a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] PRGDIRTM c);
/* read program directory 2 */
#if (!ONO8D)
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdprogdir2")]
public static extern short cnc_rdprogdir2(ushort FlibHndl,
short a, ref short b, ref short c, [Out, MarshalAs(UnmanagedType.LPStruct)] PRGDIR2 d);
#else
[DllImport("FWLIB32.dll", EntryPoint="cnc_rdprogdir2o8")]
public static extern short cnc_rdprogdir2( ushort FlibHndl,
short a, ref short b, ref short c, [Out,MarshalAs(UnmanagedType.LPStruct)] PRGDIR2 d );
#endif
/* read program directory 3 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdprogdir3")]
public static extern short cnc_rdprogdir3(ushort FlibHndl,
short a, ref int b, ref short c, [Out, MarshalAs(UnmanagedType.LPStruct)] PRGDIR3 d);
/* read program directory 4 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdprogdir4")]
public static extern short cnc_rdprogdir4(ushort FlibHndl,
short a, int b, ref short c, [Out, MarshalAs(UnmanagedType.LPStruct)] PRGDIR4 d);
/* read DNC file name for DNC1, DNC2, OSI-Ethernet */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rddncfname")]
public static extern short cnc_rddncfname(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.AsAny)] Object a);
/* write DNC file name for DNC1, DNC2, OSI-Ethernet */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrdncfname")]
public static extern short cnc_wrdncfname(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* read communication parameter for DNC1, DNC2, OSI-Ethernet */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdcomparam")]
public static extern short cnc_rdcomparam(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBCPRM a);
/* write communication parameter for DNC1, DNC2, OSI-Ethernet */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrcomparam")]
public static extern short cnc_wrcomparam(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBCPRM a);
/* read log message for DNC2 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdcomlogmsg")]
public static extern short cnc_rdcomlogmsg(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.AsAny)] Object a);
/* read operator message for DNC1, DNC2 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdcomopemsg")]
public static extern short cnc_rdcomopemsg(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.AsAny)] Object a);
/* read recieve message for OSI-Ethernet */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdrcvmsg")]
public static extern short cnc_rdrcvmsg(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.AsAny)] Object a);
/* read send message for OSI-Ethernet */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdsndmsg")]
public static extern short cnc_rdsndmsg(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.AsAny)] Object a);
/* send message for OSI-Ethernet */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_sendmessage")]
public static extern short cnc_sendmessage(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* clear message buffer for OSI-Ethernet */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_clrmsgbuff")]
public static extern short cnc_clrmsgbuff(ushort FlibHndl, short a);
/* read message recieve status for OSI-Ethernet */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdrcvstat")]
public static extern short cnc_rdrcvstat(ushort FlibHndl, out ushort a);
/* read interference check */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdintchk")]
public static extern short cnc_rdintchk(ushort FlibHndl,
short a, short b, short c, short d, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBINT e);
/* write interference check */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrintchk")]
public static extern short cnc_wrintchk(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBINT b);
/* read interference check information */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdintinfo")]
public static extern short cnc_rdintinfo(ushort FlibHndl, out short a);
/* read work coordinate shift */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdwkcdshft")]
public static extern short cnc_rdwkcdshft(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBWCSF c);
/* write work coordinate shift */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrwkcdshft")]
public static extern short cnc_wrwkcdshft(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBWCSF b);
/* read work coordinate shift measure */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdwkcdsfms")]
public static extern short cnc_rdwkcdsfms(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBWCSF c);
/* write work coordinate shift measure */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrwkcdsfms")]
public static extern short cnc_wrwkcdsfms(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBWCSF b);
/* stop the sampling for operator message history */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_stopomhis")]
public static extern short cnc_stopomhis(ushort FlibHndl);
/* start the sampling for operator message history */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_startomhis")]
public static extern short cnc_startomhis(ushort FlibHndl);
/* read operator message history information */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdomhisinfo")]
public static extern short cnc_rdomhisinfo(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBOMIF a);
/* read operator message history */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdomhistry")]
public static extern short cnc_rdomhistry(ushort FlibHndl,
ushort a, ref ushort b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBOMHIS c);
/* read operater message history data F30i */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdomhistry2")]
public static extern short cnc_rdomhistry2(ushort FlibHndl,
ushort a, ushort b, ushort c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBOMHIS2 d);
/* write external key operation history for F30i*/
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrkeyhistry")]
public static extern short cnc_wrkeyhistry(ushort FlibHndl, byte a);
/* clear operator message history */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_clearomhis")]
public static extern short cnc_clearomhis(ushort FlibHndl);
/* read b-axis tool offset value(area specified) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdbtofsr")]
public static extern short cnc_rdbtofsr(ushort FlibHndl,
short a, short b, short c, short d, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBBTO e);
/* write b-axis tool offset value(area specified) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrbtofsr")]
public static extern short cnc_wrbtofsr(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBBTO b);
/* read b-axis tool offset information */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdbtofsinfo")]
public static extern short cnc_rdbtofsinfo(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBBTLINF a);
/* read b-axis command */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdbaxis")]
public static extern short cnc_rdbaxis(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBBAXIS a);
/* read CNC system soft series and version */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdsyssoft")]
public static extern short cnc_rdsyssoft(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBSYSS a);
/* read CNC system soft series and version (2) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdsyssoft2")]
public static extern short cnc_rdsyssoft2(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBSYSS2 a);
/* read CNC module configuration information */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdmdlconfig")]
public static extern short cnc_rdmdlconfig(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBMDLC a);
/* read CNC module configuration information 2 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdmdlconfig2")]
public static extern short cnc_rdmdlconfig2(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.AsAny)] Object a);
/* read processing condition file (processing data) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdpscdproc")]
public static extern short cnc_rdpscdproc(ushort FlibHndl,
short a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBPSCD c);
/* write processing condition file (processing data) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrpscdproc")]
public static extern short cnc_wrpscdproc(ushort FlibHndl,
short a, ref short b, [In, MarshalAs(UnmanagedType.LPStruct)] IODBPSCD c);
/* read processing condition file (piercing data) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdpscdpirc")]
public static extern short cnc_rdpscdpirc(ushort FlibHndl,
short a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBPIRC c);
/* write processing condition file (piercing data) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrpscdpirc")]
public static extern short cnc_wrpscdpirc(ushort FlibHndl,
short a, ref short b, [In, MarshalAs(UnmanagedType.LPStruct)] IODBPIRC c);
/* read processing condition file (edging data) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdpscdedge")]
public static extern short cnc_rdpscdedge(ushort FlibHndl,
short a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBEDGE c);
/* write processing condition file (edging data) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrpscdedge")]
public static extern short cnc_wrpscdedge(ushort FlibHndl,
short a, ref short b, [In, MarshalAs(UnmanagedType.LPStruct)] IODBEDGE c);
/* read processing condition file (slope data) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdpscdslop")]
public static extern short cnc_rdpscdslop(ushort FlibHndl,
short a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBSLOP c);
/* write processing condition file (slope data) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrpscdslop")]
public static extern short cnc_wrpscdslop(ushort FlibHndl,
short a, ref short b, [In, MarshalAs(UnmanagedType.LPStruct)] IODBSLOP c);
/* read power controll duty data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdlpwrdty")]
public static extern short cnc_rdlpwrdty(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBLPWDT a);
/* write power controll duty data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrlpwrdty")]
public static extern short cnc_wrlpwrdty(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBLPWDT a);
/* read laser power data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdlpwrdat")]
public static extern short cnc_rdlpwrdat(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBLOPDT a);
/* read power complement */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdlpwrcpst")]
public static extern short cnc_rdlpwrcpst(ushort FlibHndl, out short a);
/* write power complement */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrlpwrcpst")]
public static extern short cnc_wrlpwrcpst(ushort FlibHndl, short a);
/* read laser assist gas selection */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdlagslt")]
public static extern short cnc_rdlagslt(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBLAGSL a);
/* write laser assist gas selection */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrlagslt")]
public static extern short cnc_wrlagslt(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBLAGSL a);
/* read laser assist gas flow */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdlagst")]
public static extern short cnc_rdlagst(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBLAGST a);
/* write laser assist gas flow */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrlagst")]
public static extern short cnc_wrlagst(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBLAGST a);
/* read laser power for edge processing */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdledgprc")]
public static extern short cnc_rdledgprc(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBLEGPR a);
/* write laser power for edge processing */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrledgprc")]
public static extern short cnc_wrledgprc(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBLEGPR a);
/* read laser power for piercing */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdlprcprc")]
public static extern short cnc_rdlprcprc(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBLPCPR a);
/* write laser power for piercing */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrlprcprc")]
public static extern short cnc_wrlprcprc(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBLPCPR a);
/* read laser command data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdlcmddat")]
public static extern short cnc_rdlcmddat(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBLCMDT a);
/* read displacement */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdldsplc")]
public static extern short cnc_rdldsplc(ushort FlibHndl, out short a);
/* write displacement */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrldsplc")]
public static extern short cnc_wrldsplc(ushort FlibHndl, short a);
/* read error for axis z */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdlerrz")]
public static extern short cnc_rdlerrz(ushort FlibHndl, out short a);
/* read active number */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdlactnum")]
public static extern short cnc_rdlactnum(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBLACTN a);
/* read laser comment */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdlcmmt")]
public static extern short cnc_rdlcmmt(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBLCMMT a);
/* read laser power select */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdlpwrslt")]
public static extern short cnc_rdlpwrslt(ushort FlibHndl, out short a);
/* write laser power select */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrlpwrslt")]
public static extern short cnc_wrlpwrslt(ushort FlibHndl, short a);
/* read laser power controll */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdlpwrctrl")]
public static extern short cnc_rdlpwrctrl(ushort FlibHndl, out short a);
/* write laser power controll */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrlpwrctrl")]
public static extern short cnc_wrlpwrctrl(ushort FlibHndl, short a);
/* read power correction factor history data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdpwofsthis")]
public static extern short cnc_rdpwofsthis(ushort FlibHndl,
int a, ref int b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBPWOFST c);
/* read management time */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdmngtime")]
public static extern short cnc_rdmngtime(ushort FlibHndl,
int a, ref int b, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBMNGTIME c);
/* write management time */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrmngtime")]
public static extern short cnc_wrmngtime(ushort FlibHndl, int a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBMNGTIME b);
/* read data related to electrical discharge at power correction ends */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rddischarge")]
public static extern short cnc_rddischarge(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBDISCHRG a);
/* read alarm history data related to electrical discharg */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rddischrgalm")]
public static extern short cnc_rddischrgalm(ushort FlibHndl,
int a, ref int b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBDISCHRGALM c);
/* get date and time from cnc */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_gettimer")]
public static extern short cnc_gettimer(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBTIMER a);
/* set date and time for cnc */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_settimer")]
public static extern short cnc_settimer(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBTIMER a);
/* read timer data from cnc */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdtimer")]
public static extern short cnc_rdtimer(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBTIME b);
/* write timer data for cnc */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrtimer")]
public static extern short cnc_wrtimer(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBTIME b);
/* read tool controll data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdtlctldata")]
public static extern short cnc_rdtlctldata(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBTLCTL a);
/* write tool controll data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrtlctldata")]
public static extern short cnc_wrtlctldata(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBTLCTL a);
/* read tool data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdtooldata")]
public static extern short cnc_rdtooldata(ushort FlibHndl,
short a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBTLDT c);
/* read tool data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrtooldata")]
public static extern short cnc_wrtooldata(ushort FlibHndl,
short a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBTLDT c);
/* read multi tool data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdmultitldt")]
public static extern short cnc_rdmultitldt(ushort FlibHndl,
short a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBMLTTL c);
/* write multi tool data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrmultitldt")]
public static extern short cnc_wrmultitldt(ushort FlibHndl,
short a, ref short b, [In, MarshalAs(UnmanagedType.LPStruct)] IODBMLTTL c);
/* read multi tap data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdmtapdata")]
public static extern short cnc_rdmtapdata(ushort FlibHndl,
short a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBMTAP c);
/* write multi tap data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrmtapdata")]
public static extern short cnc_wrmtapdata(ushort FlibHndl,
short a, ref short b, [In, MarshalAs(UnmanagedType.LPStruct)] IODBMTAP c);
/* read multi-piece machining number */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdmultipieceno")]
public static extern short cnc_rdmultipieceno(ushort FlibHndl, out int a);
/* read tool information */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdtoolinfo")]
public static extern short cnc_rdtoolinfo(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBPTLINF a);
/* read safetyzone data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdsafetyzone")]
public static extern short cnc_rdsafetyzone(ushort FlibHndl,
short a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBSAFE c);
/* write safetyzone data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrsafetyzone")]
public static extern short cnc_wrsafetyzone(ushort FlibHndl,
short a, ref short b, [In, MarshalAs(UnmanagedType.LPStruct)] IODBSAFE c);
/* read toolzone data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdtoolzone")]
public static extern short cnc_rdtoolzone(ushort FlibHndl,
short a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBTLZN c);
/* write toolzone data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrtoolzone")]
public static extern short cnc_wrtoolzone(ushort FlibHndl,
short a, ref short b, [In, MarshalAs(UnmanagedType.LPStruct)] IODBTLZN c);
/* read active toolzone data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdacttlzone")]
public static extern short cnc_rdacttlzone(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBACTTLZN a);
/* read setzone number */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdsetzone")]
public static extern short cnc_rdsetzone(ushort FlibHndl, out short a);
/* write setzone number */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrsetzone")]
public static extern short cnc_wrsetzone(ushort FlibHndl, short a);
/* read block restart information */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdbrstrinfo")]
public static extern short cnc_rdbrstrinfo(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBBRS a);
/* read menu switch signal */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdmenuswitch")]
public static extern short cnc_rdmenuswitch(ushort FlibHndl, out short a);
/* write menu switch signal */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrmenuswitch")]
public static extern short cnc_wrmenuswitch(ushort FlibHndl, short a, short b);
/* read tool radius offset for position data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdradofs")]
public static extern short cnc_rdradofs(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBROFS a);
/* read tool length offset for position data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdlenofs")]
public static extern short cnc_rdlenofs(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBLOFS a);
/* read fixed cycle for position data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdfixcycle")]
public static extern short cnc_rdfixcycle(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBFIX a);
/* read coordinate rotate for position data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdcdrotate")]
public static extern short cnc_rdcdrotate(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBROT a);
/* read 3D coordinate convert for position data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rd3dcdcnv")]
public static extern short cnc_rd3dcdcnv(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODB3DCD a);
/* read programable mirror image for position data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdmirimage")]
public static extern short cnc_rdmirimage(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBMIR a);
/* read scaling for position data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdscaling")]
public static extern short cnc_rdscaling(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBSCL a);
/* read 3D tool offset for position data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rd3dtofs")]
public static extern short cnc_rd3dtofs(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODB3DTO a);
/* read tool position offset for position data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdposofs")]
public static extern short cnc_rdposofs(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBPOFS a);
/* read hpcc setting data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdhpccset")]
public static extern short cnc_rdhpccset(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBHPST a);
/* write hpcc setting data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrhpccset")]
public static extern short cnc_wrhpccset(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBHPST a);
/* hpcc data auto setting data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_hpccatset")]
public static extern short cnc_hpccatset(ushort FlibHndl);
/* read hpcc tuning data ( parameter input ) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdhpcctupr")]
public static extern short cnc_rdhpcctupr(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBHPPR a);
/* write hpcc tuning data ( parameter input ) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrhpcctupr")]
public static extern short cnc_wrhpcctupr(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBHPPR a);
/* read hpcc tuning data ( acc input ) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdhpcctuac")]
public static extern short cnc_rdhpcctuac(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBHPAC a);
/* write hpcc tuning data ( acc input ) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrhpcctuac")]
public static extern short cnc_wrhpcctuac(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBHPAC a);
/* hpcc data auto tuning */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_hpccattune")]
public static extern short cnc_hpccattune(ushort FlibHndl, short a, out short b);
/* read hpcc fine level */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_hpccactfine")]
public static extern short cnc_hpccactfine(ushort FlibHndl, out short a);
/* select hpcc fine level */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_hpccselfine")]
public static extern short cnc_hpccselfine(ushort FlibHndl, short a);
/* read active fixture offset */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdactfixofs")]
public static extern short cnc_rdactfixofs(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBZOFS b);
/* read fixture offset */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdfixofs")]
public static extern short cnc_rdfixofs(ushort FlibHndl,
short a, short b, short c, short d, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBZOR e);
/* write fixture offset */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrfixofs")]
public static extern short cnc_wrfixofs(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBZOR b);
/* read tip of tool for 3D handle */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rd3dtooltip")]
public static extern short cnc_rd3dtooltip(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODB3DHDL a);
/* read pulse for 3D handle */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rd3dpulse")]
public static extern short cnc_rd3dpulse(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODB3DPLS a);
/* read move overrlap of tool for 3D handle */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rd3dmovrlap")]
public static extern short cnc_rd3dmovrlap(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODB3DHDL a);
/* read change offset for 3D handle */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rd3dofschg")]
public static extern short cnc_rd3dofschg(ushort FlibHndl, ref int a);
/* clear pulse and change offset for 3D handle */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_clr3dplsmov")]
public static extern short cnc_clr3dplsmov(ushort FlibHndl, short a);
/* cycle start */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_start")]
public static extern short cnc_start(ushort FlibHndl);
/* reset CNC */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_reset")]
public static extern short cnc_reset(ushort FlibHndl);
/* reset CNC 2 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_reset2")]
public static extern short cnc_reset2(ushort FlibHndl);
/* read axis name */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdaxisname")]
public static extern short cnc_rdaxisname(ushort FlibHndl,
ref short a, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBAXISNAME b);
/* read spindle name */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdspdlname")]
public static extern short cnc_rdspdlname(ushort FlibHndl,
ref short a, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBSPDLNAME b);
/* read extended axis name */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_exaxisname")]
public static extern short cnc_exaxisname(ushort FlibHndl,
short a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBEXAXISNAME c);
/* read SRAM variable area for C language executor */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdcexesram")]
public static extern short cnc_rdcexesram(ushort FlibHndl, int a, [In, MarshalAs(UnmanagedType.AsAny)] Object b, ref int c);
/* write SRAM variable area for C language executor */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrcexesram")]
public static extern short cnc_wrcexesram(ushort FlibHndl, int a, [In, MarshalAs(UnmanagedType.AsAny)] Object b, ref int c);
/* read maximum size and linear address of SRAM variable area for C language executor */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_cexesraminfo")]
public static extern short cnc_cexesraminfo(ushort FlibHndl, out short a, out int b, out int c);
/* read maximum size of SRAM variable area for C language executor */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_cexesramsize")]
public static extern short cnc_cexesramsize(ushort FlibHndl, out int a);
/* read additional workpiece coordinate systems number */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdcoordnum")]
public static extern short cnc_rdcoordnum(ushort FlibHndl, out short a);
/* converts from FANUC code to Shift JIS code */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_ftosjis")]
public static extern short cnc_ftosjis(ushort FlibHndl,
[In, MarshalAs(UnmanagedType.AsAny)] Object a, [Out, MarshalAs(UnmanagedType.AsAny)] Object b);
/* Set the unsolicited message parameters */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrunsolicprm")]
public static extern short cnc_wrunsolicprm(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBUNSOLIC b);
/* Get the unsolicited message parameters */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdunsolicprm")]
public static extern short cnc_rdunsolicprm(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBUNSOLIC b);
/* Start of unsolicited message */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_unsolicstart")]
public static extern short cnc_unsolicstart(ushort FlibHndl, short a, int hWnd, uint c, short d, out short e);
/* End of unsolicited message */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_unsolicstop")]
public static extern short cnc_unsolicstop(ushort FlibHndl, short a);
/* Reads the unsolicited message data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdunsolicmsg")]
public static extern short cnc_rdunsolicmsg(short a, [In, Out] IDBUNSOLICMSG b);
/* read machine specific maintenance item */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdpm_mcnitem")]
public static extern short cnc_rdpm_mcnitem(ushort FlibHndl, short a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBITEM c);
/* write machine specific maintenance item */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrpm_mcnitem")]
public static extern short cnc_wrpm_mcnitem(ushort FlibHndl, short a, short b, [In, MarshalAs(UnmanagedType.LPStruct)] IODBITEM c);
/* read cnc maintenance item */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdpm_cncitem")]
public static extern short cnc_rdpm_cncitem(ushort FlibHndl, short a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBITEM c);
/* read maintenance item status */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdpm_item")]
public static extern short cnc_rdpm_item(ushort FlibHndl, short a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBPMAINTE c);
/* write maintenance item status */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrpm_item")]
public static extern short cnc_wrpm_item(ushort FlibHndl, short a, short b, short c, [In, MarshalAs(UnmanagedType.LPStruct)] IODBPMAINTE d);
/* Display of optional message */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_dispoptmsg")]
public static extern short cnc_dispoptmsg(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* Reading of answer for optional message display */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_optmsgans")]
public static extern short cnc_optmsgans(ushort FlibHndl, out short a);
/* Get CNC Model */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_getcncmodel")]
public static extern short cnc_getcncmodel(ushort FlibHndl, out short a);
/* read number of repeats */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdrepeatval")]
public static extern short cnc_rdrepeatval(ushort FlibHndl, out int a);
/* read CNC system hard info */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdsyshard")]
public static extern short cnc_rdsyshard(ushort FlibHndl, short a, ref short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBSYSH c);
/* read CNC system soft series and version (3) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdsyssoft3")]
public static extern short cnc_rdsyssoft3(ushort FlibHndl, short a, ref short b, out short c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBSYSS3 d);
/* read digit of program number */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_progdigit")]
public static extern short cnc_progdigit(ushort FlibHndl, out short a);
/* read CNC system path information */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_sysinfo_ex")]
public static extern short cnc_sysinfo_ex(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBSYSEX a);
/*------------------*/
/* CNC : SERCOS I/F */
/*------------------*/
/* Get reservation of service channel for SERCOS I/F */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_srcsrsvchnl")]
public static extern short cnc_srcsrsvchnl(ushort FlibHndl);
/* Read ID information of SERCOS I/F */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_srcsrdidinfo")]
public static extern short cnc_srcsrdidinfo(ushort FlibHndl,
int a, short b, short c, [Out, MarshalAs(UnmanagedType.AsAny)] IODBIDINF d);
/* Write ID information of SERCOS I/F */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_srcswridinfo")]
public static extern short cnc_srcswridinfo(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBIDINF a);
/* Start of reading operation data from drive of SERCOS I/F */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_srcsstartrd")]
public static extern short cnc_srcsstartrd(ushort FlibHndl, int a, short b);
/* Start of writing operation data to drive of SERCOS I/F */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_srcsstartwrt")]
public static extern short cnc_srcsstartwrt(ushort FlibHndl, int a, short b);
/* Stop of reading/writing operation data from/to drive of SERCOS I/F */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_srcsstopexec")]
public static extern short cnc_srcsstopexec(ushort FlibHndl);
/* Get execution status of reading/writing operation data of SERCOS I/F */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_srcsrdexstat")]
public static extern short cnc_srcsrdexstat(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBSRCSST a);
/* Read operation data from data buffer for SERCOS I/F */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_srcsrdopdata")]
public static extern short cnc_srcsrdopdata(ushort FlibHndl, int a, ref int b, [Out, MarshalAs(UnmanagedType.AsAny)] Object c);
/* Write operation data to data buffer for SERCOS I/F */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_srcswropdata")]
public static extern short cnc_srcswropdata(ushort FlibHndl, int a, int b, [In, MarshalAs(UnmanagedType.AsAny)] Object c);
/* Free reservation of service channel for SERCOS I/F */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_srcsfreechnl")]
public static extern short cnc_srcsfreechnl(ushort FlibHndl);
/* Read drive assign of SERCOS I/F */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_srcsrdlayout")]
public static extern short cnc_srcsrdlayout(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBSRCSLYT a);
/* Read communication phase of drive of SERCOS I/F */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_srcsrddrvcp")]
public static extern short cnc_srcsrddrvcp(ushort FlibHndl, out short a);
/*----------------------------*/
/* CNC : Graphic command data */
/*----------------------------*/
/* Start drawing position */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_startdrawpos")]
public static extern short cnc_startdrawpos(ushort FlibHndl);
/* Stop drawing position */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_stopdrawpos")]
public static extern short cnc_stopdrawpos(ushort FlibHndl);
/* Start dynamic graphic */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_startdyngrph")]
public static extern short cnc_startdyngrph(ushort FlibHndl);
/* Stop dynamic graphic */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_stopdyngrph")]
public static extern short cnc_stopdyngrph(ushort FlibHndl);
/* Read graphic command data */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdgrphcmd")]
public static extern short cnc_rdgrphcmd(ushort FlibHndl, ref short a, [Out, MarshalAs(UnmanagedType.AsAny)] Object b);
/* Update graphic command read pointer */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrgrphcmdptr")]
public static extern short cnc_wrgrphcmdptr(ushort FlibHndl, short a);
/* Read cancel flag */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdgrphcanflg")]
public static extern short cnc_rdgrphcanflg(ushort FlibHndl, out short a);
/* Clear graphic command */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_clrgrphcmd")]
public static extern short cnc_clrgrphcmd(ushort FlibHndl);
/*---------------------------*/
/* CNC : Servo learning data */
/*---------------------------*/
/* Servo learning data read start */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_svdtstartrd")]
public static extern short cnc_svdtstartrd(ushort FlibHndl, short a);
/* Servo learning data write start */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_svdtstartwr")]
public static extern short cnc_svdtstartwr(ushort FlibHndl, short a);
/* Servo learning data read end */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_svdtendrd")]
public static extern short cnc_svdtendrd(ushort FlibHndl);
/* Servo learning data write end */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_svdtendwr")]
public static extern short cnc_svdtendwr(ushort FlibHndl);
/* Servo learning data read/write stop */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_svdtstopexec")]
public static extern short cnc_svdtstopexec(ushort FlibHndl);
/* Servo learning data read from I/F buffer */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_svdtrddata")]
public static extern short cnc_svdtrddata(ushort FlibHndl,
out short a, ref int b, [Out, MarshalAs(UnmanagedType.AsAny)] Object c);
/* Servo learning data write to I/F buffer */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_svdtwrdata")]
public static extern short cnc_svdtwrdata(ushort FlibHndl,
out short a, ref int b, [In, MarshalAs(UnmanagedType.AsAny)] Object c);
/*----------------------------*/
/* CNC : Servo Guide */
/*----------------------------*/
/* Servo Guide (Channel data set) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_sdsetchnl")]
public static extern short cnc_sdsetchnl(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IDBCHAN b);
/* Servo Guide (Channel data clear) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_sdclrchnl")]
public static extern short cnc_sdclrchnl(ushort FlibHndl);
/* Servo Guide (Sampling start) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_sdstartsmpl")]
public static extern short cnc_sdstartsmpl(ushort FlibHndl, short a, int b, [Out, MarshalAs(UnmanagedType.AsAny)] Object c);
/* Servo Guide (Sampling cancel) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_sdcancelsmpl")]
public static extern short cnc_sdcancelsmpl(ushort FlibHndl);
/* Servo Guide (read Sampling data) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_sdreadsmpl")]
public static extern short cnc_sdreadsmpl(ushort FlibHndl,
out short a, int b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBSD c);
/* Servo Guide (Sampling end) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_sdendsmpl")]
public static extern short cnc_sdendsmpl(ushort FlibHndl);
/* Servo Guide (read 1 shot data) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_sdread1shot")]
public static extern short cnc_sdread1shot(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.AsAny)] Object a);
/* Servo feedback data (Channel data set) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_sfbsetchnl")]
public static extern short cnc_sfbsetchnl(ushort FlibHndl,
short a, int b, [In, MarshalAs(UnmanagedType.LPStruct)] IDBSFBCHAN c);
/* Servo feedback data (Channel data clear) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_sfbclrchnl")]
public static extern short cnc_sfbclrchnl(ushort FlibHndl);
/* Servo feedback data (Sampling start) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_sfbstartsmpl")]
public static extern short cnc_sfbstartsmpl(ushort FlibHndl, short a, int b);
/* Servo feedback data (Sampling cancel) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_sfbcancelsmpl")]
public static extern short cnc_sfbcancelsmpl(ushort FlibHndl);
/* Servo feedback data (read Sampling data) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_sfbreadsmpl")]
public static extern short cnc_sfbreadsmpl(ushort FlibHndl,
out short a, int b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBSD c);
/* Servo feedback data (Sampling end) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_sfbendsmpl")]
public static extern short cnc_sfbendsmpl(ushort FlibHndl);
/*----------------------------*/
/* CNC : NC display function */
/*----------------------------*/
/* Start NC display */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_startnccmd")]
public static extern short cnc_startnccmd(ushort FlibHndl);
/* Start NC display (2) */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_startnccmd2")]
public static extern short cnc_startnccmd2(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* Stop NC display */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_stopnccmd")]
public static extern short cnc_stopnccmd(ushort FlibHndl);
/* Get NC display mode */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_getdspmode")]
public static extern short cnc_getdspmode(ushort FlibHndl, out short a);
/*------------------------------------*/
/* CNC : Remote diagnostics function */
/*------------------------------------*/
/* Start remote diagnostics function */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_startrmtdgn")]
public static extern short cnc_startrmtdgn(ushort FlibHndl);
/* Stop remote diagnostics function */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_stoprmtdgn")]
public static extern short cnc_stoprmtdgn(ushort FlibHndl);
/* Read data from remote diagnostics I/F */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdrmtdgn")]
public static extern short cnc_rdrmtdgn(ushort FlibHndl, out int a, [Out, MarshalAs(UnmanagedType.AsAny)] Object b);
/* Write data to remote diagnostics I/F */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrrmtdgn")]
public static extern short cnc_wrrmtdgn(ushort FlibHndl, ref int a, [In, MarshalAs(UnmanagedType.AsAny)] Object b);
/* Set CommStatus of remote diagnostics I/F area */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrcommstatus")]
public static extern short cnc_wrcommstatus(ushort FlibHndl, short a);
/* Check remote diagnostics I/F */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_chkrmtdgn")]
public static extern short cnc_chkrmtdgn(ushort FlibHndl);
/*-------------------------*/
/* CNC : FS18-LN function */
/*-------------------------*/
/* read allowance */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_allowance")]
public static extern short cnc_allowance(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBAXIS c);
/* read allowanced state */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_allowcnd")]
public static extern short cnc_allowcnd(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBCAXIS c);
/* set work zero */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_workzero")]
public static extern short cnc_workzero(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBZOFS b);
/* set slide position */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_slide")]
public static extern short cnc_slide(ushort FlibHndl,
short a, short b, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBAXIS c);
/*----------------------------------*/
/* CNC: Teaching data I/F function */
/*----------------------------------*/
/* Teaching data get start */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_startgetdgdat")]
public static extern short cnc_startgetdgdat(ushort FlibHndl);
/* Teaching data get stop */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_stopgetdgdat")]
public static extern short cnc_stopgetdgdat(ushort FlibHndl);
/* Teaching data read */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rddgdat")]
public static extern short cnc_rddgdat(ushort FlibHndl, ref short a, [Out, MarshalAs(UnmanagedType.AsAny)] Object b);
/* Teaching data read pointer write */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrdgdatptr")]
public static extern short cnc_wrdgdatptr(ushort FlibHndl, short a);
/* Teaching data clear */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_clrdgdat")]
public static extern short cnc_clrdgdat(ushort FlibHndl);
/*---------------------------------*/
/* CNC : C-EXE SRAM file function */
/*---------------------------------*/
/* open C-EXE SRAM file */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_opencexefile")]
public static extern short cnc_opencexefile(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a, short b, short c);
/* close C-EXE SRAM file */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_closecexefile")]
public static extern short cnc_closecexefile(ushort FlibHndl);
/* read C-EXE SRAM file */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdcexefile")]
public static extern short cnc_rdcexefile(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.AsAny)] Object a, ref uint b);
/* write C-EXE SRAM file */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_wrcexefile")]
public static extern short cnc_wrcexefile(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a, ref uint b);
/* read C-EXE SRAM disk directory */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_cexedirectory")]
public static extern short cnc_cexedirectory(ushort FlibHndl,
[In, MarshalAs(UnmanagedType.AsAny)] Object a, ref ushort b, ushort c, [Out, MarshalAs(UnmanagedType.LPStruct)] CFILEINFO d);
/*-----*/
/* PMC */
/*-----*/
/* read message from PMC to MMC */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_rdmsg")]
public static extern short pmc_rdmsg(ushort FlibHndl, ref short a, [Out, MarshalAs(UnmanagedType.AsAny)] Object b);
/* write message from MMC to PMC */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_wrmsg")]
public static extern short pmc_wrmsg(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.AsAny)] Object b);
/* read message from PMC to MMC(conditional) */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_crdmsg")]
public static extern short pmc_crdmsg(ushort FlibHndl, ref short a, [Out, MarshalAs(UnmanagedType.AsAny)] Object b);
/* write message from MMC to PMC(conditional) */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_cwrmsg")]
public static extern short pmc_cwrmsg(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.AsAny)] Object b);
/* read PMC data(area specified) */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_rdpmcrng")]
public static extern short pmc_rdpmcrng(ushort FlibHndl,
short a, short b, ushort c, ushort d, ushort e, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBPMC0 f);
[DllImport("FWLIB32.dll", EntryPoint = "pmc_rdpmcrng")]
public static extern short pmc_rdpmcrng(ushort FlibHndl,
short a, short b, ushort c, ushort d, ushort e, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBPMC1 f);
[DllImport("FWLIB32.dll", EntryPoint = "pmc_rdpmcrng")]
public static extern short pmc_rdpmcrng(ushort FlibHndl,
short a, short b, ushort c, ushort d, ushort e, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBPMC2 f);
/* write PMC data(area specified) */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_wrpmcrng")]
public static extern short pmc_wrpmcrng(ushort FlibHndl, ushort a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBPMC0 b);
[DllImport("FWLIB32.dll", EntryPoint = "pmc_wrpmcrng")]
public static extern short pmc_wrpmcrng(ushort FlibHndl, ushort a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBPMC1 b);
[DllImport("FWLIB32.dll", EntryPoint = "pmc_wrpmcrng")]
public static extern short pmc_wrpmcrng(ushort FlibHndl, ushort a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBPMC2 b);
/* read data from extended backup memory */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_rdkpm")]
public static extern short pmc_rdkpm(ushort FlibHndl, uint a, [Out, MarshalAs(UnmanagedType.AsAny)] Object b, ushort c);
/* write data to extended backup memory */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_wrkpm")]
public static extern short pmc_wrkpm(ushort FlibHndl, uint a, [In, MarshalAs(UnmanagedType.AsAny)] Object b, ushort c);
/* read data from extended backup memory 2 */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_rdkpm2")]
public static extern short pmc_rdkpm2(ushort FlibHndl, uint a, [Out, MarshalAs(UnmanagedType.AsAny)] Object b, uint c);
/* write data to extended backup memory 2 */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_wrkpm2")]
public static extern short pmc_wrkpm2(ushort FlibHndl, uint a, [In, MarshalAs(UnmanagedType.AsAny)] Object b, uint c);
/* read maximum size of extended backup memory */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_kpmsiz")]
public static extern short pmc_kpmsiz(ushort FlibHndl, out uint a);
/* read informations of PMC data */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_rdpmcinfo")]
public static extern short pmc_rdpmcinfo(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBPMCINF b);
/* read PMC parameter data table contorol data */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_rdcntldata")]
public static extern short pmc_rdcntldata(ushort FlibHndl,
short a, short b, short c, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBPMCCNTL d);
/* write PMC parameter data table contorol data */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_wrcntldata")]
public static extern short pmc_wrcntldata(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBPMCCNTL b);
/* read PMC parameter data table contorol data group number */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_rdcntlgrp")]
public static extern short pmc_rdcntlgrp(ushort FlibHndl, out short a);
/* write PMC parameter data table contorol data group number */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_wrcntlgrp")]
public static extern short pmc_wrcntlgrp(ushort FlibHndl, short a);
/* read PMC alarm message */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_rdalmmsg")]
public static extern short pmc_rdalmmsg(ushort FlibHndl,
short a, ref short b, out short c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBPMCALM d);
/* get detail error for pmc */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_getdtailerr")]
public static extern short pmc_getdtailerr(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBPMCERR a);
/* read PMC memory data */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_rdpmcmem")]
public static extern short pmc_rdpmcmem(ushort FlibHndl,
short a, int b, int c, [Out, MarshalAs(UnmanagedType.AsAny)] Object d);
/* write PMC memory data */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_wrpmcmem")]
public static extern short pmc_wrpmcmem(ushort FlibHndl,
short a, int b, int c, [In, MarshalAs(UnmanagedType.AsAny)] Object d);
/* read PMC-SE memory data */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_rdpmcsemem")]
public static extern short pmc_rdpmcsemem(ushort FlibHndl,
short a, int b, int c, [Out, MarshalAs(UnmanagedType.AsAny)] Object d);
/* write PMC-SE memory data */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_wrpmcsemem")]
public static extern short pmc_wrpmcsemem(ushort FlibHndl,
short a, int b, int c, [In, MarshalAs(UnmanagedType.AsAny)] Object d);
/* read pmc title data */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_rdpmctitle")]
public static extern short pmc_rdpmctitle(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBPMCTITLE a);
/* read PMC parameter start */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_rdprmstart")]
public static extern short pmc_rdprmstart(ushort FlibHndl);
/* read PMC parameter */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_rdpmcparam")]
public static extern short pmc_rdpmcparam(ushort FlibHndl, ref int a, [Out, MarshalAs(UnmanagedType.AsAny)] Object b);
/* read PMC parameter end */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_rdprmend")]
public static extern short pmc_rdprmend(ushort FlibHndl);
/* write PMC parameter start */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_wrprmstart")]
public static extern short pmc_wrprmstart(ushort FlibHndl);
/* write PMC parameter */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_wrpmcparam")]
public static extern short pmc_wrpmcparam(ushort FlibHndl, ref int a, [In, MarshalAs(UnmanagedType.AsAny)] Object b);
/* write PMC parameter end */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_wrprmend")]
public static extern short pmc_wrprmend(ushort FlibHndl);
/* read PMC data */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_rdpmcrng_ext")]
public static extern short pmc_rdpmcrng_ext(ushort FlibHndl,
short a, [In, Out, MarshalAs(UnmanagedType.LPStruct)] IODBPMCEXT b);
/* write PMC I/O link assigned data */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_wriolinkdat")]
public static extern short pmc_wriolinkdat(ushort FlibHndl, uint a, [In, MarshalAs(UnmanagedType.AsAny)] Object b, uint c);
/* read PMC address information */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_rdpmcaddr")]
public static extern short pmc_rdpmcaddr(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBPMCADR a);
/* select PMC unit */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_select_pmc_unit")]
public static extern short pmc_select_pmc_unit(ushort FlibHndl, int a);
/* get current PMC unit */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_get_current_pmc_unit")]
public static extern short pmc_get_current_pmc_unit(ushort FlibHndl, ref int a);
/* get number of PMC */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_get_number_of_pmc")]
public static extern short pmc_get_number_of_pmc(ushort FlibHndl, ref int a);
/* get PMC unit types */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_get_pmc_unit_types")]
public static extern short pmc_get_pmc_unit_types(ushort FlibHndl, int[] a, ref int b);
/* set PMC Timer type */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_set_timer_type")]
public static extern short pmc_set_timer_type(ushort FlibHndl, ushort a, ushort b, ref short c);
/* get PMC Timer type */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_get_timer_type")]
public static extern short pmc_get_timer_type(ushort FlibHndl, ushort a, ushort b, ref short c);
/*----------------------------*/
/* PMC : PROFIBUS function */
/*----------------------------*/
/* read PROFIBUS configration data */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_prfrdconfig")]
public static extern short pmc_prfrdconfig(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBPRFCNF a);
/* read bus parameter for master function */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_prfrdbusprm")]
public static extern short pmc_prfrdbusprm(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBBUSPRM a);
/* write bus parameter for master function */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_prfwrbusprm")]
public static extern short pmc_prfwrbusprm(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBBUSPRM a);
/* read slave parameter for master function */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_prfrdslvprm")]
public static extern short pmc_prfrdslvprm(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBSLVPRM b);
[DllImport("FWLIB32.dll", EntryPoint = "pmc_prfrdslvprm")]
public static extern short pmc_prfrdslvprm(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBSLVPRM2 b);
/* write slave parameter for master function */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_prfwrslvprm")]
public static extern short pmc_prfwrslvprm(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBSLVPRM b);
[DllImport("FWLIB32.dll", EntryPoint = "pmc_prfwrslvprm")]
public static extern short pmc_prfwrslvprm(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBSLVPRM2 b);
/* read allocation address for master function */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_prfrdallcadr")]
public static extern short pmc_prfrdallcadr(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBPRFADR b);
/* set allocation address for master function */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_prfwrallcadr")]
public static extern short pmc_prfwrallcadr(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBPRFADR b);
/* read allocation address for slave function */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_prfrdslvaddr")]
public static extern short pmc_prfrdslvaddr(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBSLVADR a);
/* set allocation address for slave function */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_prfwrslvaddr")]
public static extern short pmc_prfwrslvaddr(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBSLVADR a);
/* read status for slave function */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_prfrdslvstat")]
public static extern short pmc_prfrdslvstat(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBSLVST a);
/* Reads slave index data of master function */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_prfrdslvid")]
public static extern short pmc_prfrdslvid(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBSLVID b);
/* Writes slave index data of master function */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_prfwrslvid")]
public static extern short pmc_prfwrslvid(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBSLVID b);
/* Reads slave parameter of master function(2) */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_prfrdslvprm2")]
public static extern short pmc_prfrdslvprm2(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBSLVPRM3 b);
/* Writes slave parameter of master function(2) */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_prfwrslvprm2")]
public static extern short pmc_prfwrslvprm2(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBSLVPRM3 b);
/* Reads DI/DO parameter of master function */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_prfrddido")]
public static extern short pmc_prfrddido(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBDIDO b);
/* Writes DI/DO parameter of master function */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_prfwrdido")]
public static extern short pmc_prfwrdido(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.LPStruct)] IODBDIDO b);
/* Reads indication address of master function */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_prfrdindiadr")]
public static extern short pmc_prfrdindiadr(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBINDEADR a);
/* Writes indication address of master function */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_prfwrindiadr")]
public static extern short pmc_prfwrindiadr(ushort FlibHndl, [In, MarshalAs(UnmanagedType.LPStruct)] IODBINDEADR a);
/* Reads operation mode of master function */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_prfrdopmode")]
public static extern short pmc_prfrdopmode(ushort FlibHndl, ref short a);
/* Writes operation mode of master function */
[DllImport("FWLIB32.dll", EntryPoint = "pmc_prfwropmode")]
public static extern short pmc_prfwropmode(ushort FlibHndl, short a, ref short b);
/*-----------------------------------------------*/
/* DS : Data server & Ethernet board function */
/*-----------------------------------------------*/
/* read the parameter of the Ethernet board */
[DllImport("FWLIB32.dll", EntryPoint = "etb_rdparam")]
public static extern short etb_rdparam(ushort FlibHndl,
short a, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBETP_TCP b);
[DllImport("FWLIB32.dll", EntryPoint = "etb_rdparam")]
public static extern short etb_rdparam(ushort FlibHndl,
short a, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBETP_HOST b);
[DllImport("FWLIB32.dll", EntryPoint = "etb_rdparam")]
public static extern short etb_rdparam(ushort FlibHndl,
short a, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBETP_FTP b);
[DllImport("FWLIB32.dll", EntryPoint = "etb_rdparam")]
public static extern short etb_rdparam(ushort FlibHndl,
short a, [Out, MarshalAs(UnmanagedType.LPStruct)] IODBETP_ETB b);
/* write the parameter of the Ethernet board */
[DllImport("FWLIB32.dll", EntryPoint = "etb_wrparam")]
public static extern short etb_wrparam(ushort FlibHndl,
[In, MarshalAs(UnmanagedType.LPStruct)] IODBETP_TCP a);
[DllImport("FWLIB32.dll", EntryPoint = "etb_wrparam")]
public static extern short etb_wrparam(ushort FlibHndl,
[In, MarshalAs(UnmanagedType.LPStruct)] IODBETP_HOST a);
[DllImport("FWLIB32.dll", EntryPoint = "etb_wrparam")]
public static extern short etb_wrparam(ushort FlibHndl,
[In, MarshalAs(UnmanagedType.LPStruct)] IODBETP_FTP a);
/* read the error message of the Ethernet board */
[DllImport("FWLIB32.dll", EntryPoint = "etb_rderrmsg")]
public static extern short etb_rderrmsg(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBETMSG b);
/* read the mode of the Data Server */
[DllImport("FWLIB32.dll", EntryPoint = "ds_rdmode")]
public static extern short ds_rdmode(ushort FlibHndl, ref short a);
/* write the mode of the Data Server */
[DllImport("FWLIB32.dll", EntryPoint = "ds_wrmode")]
public static extern short ds_wrmode(ushort FlibHndl, short a);
/* read information of the Data Server's HDD */
[DllImport("FWLIB32.dll", EntryPoint = "ds_rdhddinfo")]
public static extern short ds_rdhddinfo(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBHDDINF a);
/* read the file list of the Data Server's HDD */
[DllImport("FWLIB32.dll", EntryPoint = "ds_rdhdddir")]
public static extern short ds_rdhdddir(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a, int b, out short c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBHDDDIR d);
/* delete the file of the Data Serve's HDD */
[DllImport("FWLIB32.dll", EntryPoint = "ds_delhddfile")]
public static extern short ds_delhddfile(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* copy the file of the Data Server's HDD */
[DllImport("FWLIB32.dll", EntryPoint = "ds_copyhddfile")]
public static extern short ds_copyhddfile(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a, [In, MarshalAs(UnmanagedType.AsAny)] Object b);
/* change the file name of the Data Server's HDD */
[DllImport("FWLIB32.dll", EntryPoint = "ds_renhddfile")]
public static extern short ds_renhddfile(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a, [In, MarshalAs(UnmanagedType.AsAny)] Object b);
/* execute the PUT command of the FTP */
[DllImport("FWLIB32.dll", EntryPoint = "ds_puthddfile")]
public static extern short ds_puthddfile(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a, [In, MarshalAs(UnmanagedType.AsAny)] Object b);
/* execute the MPUT command of the FTP */
[DllImport("FWLIB32.dll", EntryPoint = "ds_mputhddfile")]
public static extern short ds_mputhddfile(ushort hLib, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* read information of the host */
[DllImport("FWLIB32.dll", EntryPoint = "ds_rdhostinfo")]
public static extern short ds_rdhostinfo(ushort FlibHndl, out int a, int b);
/* read the file list of the host */
[DllImport("FWLIB32.dll", EntryPoint = "ds_rdhostdir")]
public static extern short ds_rdhostdir(ushort FlibHndl, short a, int b, out short c, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBHOSTDIR d, int e);
/* read the file list of the host 2 */
[DllImport("FWLIB32.dll", EntryPoint = "ds_rdhostdir2")]
public static extern short ds_rdhostdir2(ushort FlibHndl, short a, int b, out short c, out int d, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBHOSTDIR e, int f);
/* delete the file of the host */
[DllImport("FWLIB32.dll", EntryPoint = "ds_delhostfile")]
public static extern short ds_delhostfile(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a, int b);
/* execute the GET command of the FTP */
[DllImport("FWLIB32.dll", EntryPoint = "ds_gethostfile")]
public static extern short ds_gethostfile(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a, [In, MarshalAs(UnmanagedType.AsAny)] Object b);
/* execute the MGET command of the FTP */
[DllImport("FWLIB32.dll", EntryPoint = "ds_mgethostfile")]
public static extern short ds_mgethostfile(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* read the execution result */
[DllImport("FWLIB32.dll", EntryPoint = "ds_rdresult")]
public static extern short ds_rdresult(ushort FlibHndl);
/* stop the execution of the command */
[DllImport("FWLIB32.dll", EntryPoint = "ds_cancel")]
public static extern short ds_cancel(ushort FlibHndl);
/* read the file from the Data Server */
[DllImport("FWLIB32.dll", EntryPoint = "ds_rdncfile")]
public static extern short ds_rdncfile(ushort FlibHndl, short a, [In, MarshalAs(UnmanagedType.AsAny)] Object b);
/* read the file from the Data Server 2 */
[DllImport("FWLIB32.dll", EntryPoint = "ds_rdncfile2")]
public static extern short ds_rdncfile2(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* write the file to the Data Server */
[DllImport("FWLIB32.dll", EntryPoint = "ds_wrncfile")]
public static extern short ds_wrncfile(ushort FlibHndl, short a, int b);
/* read the file name for the DNC operation in the Data Server's HDD */
[DllImport("FWLIB32.dll", EntryPoint = "ds_rddnchddfile")]
public static extern short ds_rddnchddfile(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.AsAny)] Object a);
/* write the file name for the DNC operation in the Data Server's HDD */
[DllImport("FWLIB32.dll", EntryPoint = "ds_wrdnchddfile")]
public static extern short ds_wrdnchddfile(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* read the file name for the DNC operation in the host */
[DllImport("FWLIB32.dll", EntryPoint = "ds_rddnchostfile")]
public static extern short ds_rddnchostfile(ushort FlibHndl, out short a, [Out, MarshalAs(UnmanagedType.AsAny)] Object b);
/* write the file name for the DNC operation in the host */
[DllImport("FWLIB32.dll", EntryPoint = "ds_wrdnchostfile")]
public static extern short ds_wrdnchostfile(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* read the connecting host number */
[DllImport("FWLIB32.dll", EntryPoint = "ds_rdhostno")]
public static extern short ds_rdhostno(ushort FlibHndl, out short a);
/* read maintenance information */
[DllImport("FWLIB32.dll", EntryPoint = "ds_rdmntinfo")]
public static extern short ds_rdmntinfo(ushort FlibHndl, short a, [Out, MarshalAs(UnmanagedType.LPStruct)]DSMNTINFO b);
/* check the Data Server's HDD */
[DllImport("FWLIB32.dll", EntryPoint = "ds_checkhdd")]
public static extern short ds_checkhdd(ushort FlibHndl);
/* format the Data Server's HDD */
[DllImport("FWLIB32.dll", EntryPoint = "ds_formathdd")]
public static extern short ds_formathdd(ushort FlibHndl);
/* create the directory in the Data Server's HDD */
[DllImport("FWLIB32.dll", EntryPoint = "ds_makehdddir")]
public static extern short ds_makehdddir(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* delete directory in the Data Server's HDD */
[DllImport("FWLIB32.dll", EntryPoint = "ds_delhdddir")]
public static extern short ds_delhdddir(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* change the current directory */
[DllImport("FWLIB32.dll", EntryPoint = "ds_chghdddir")]
public static extern short ds_chghdddir(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* execute the PUT command according to the list file */
[DllImport("FWLIB32.dll", EntryPoint = "ds_lputhddfile")]
public static extern short ds_lputhddfile(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* delete files according to the list file */
[DllImport("FWLIB32.dll", EntryPoint = "ds_ldelhddfile")]
public static extern short ds_ldelhddfile(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* execute the GET command according to the list file */
[DllImport("FWLIB32.dll", EntryPoint = "ds_lgethostfile")]
public static extern short ds_lgethostfile(ushort FlibHndl, [In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* read the directory for M198 operation */
[DllImport("FWLIB32.dll", EntryPoint = "ds_rdm198hdddir")]
public static extern short ds_rdm198hdddir(ushort FlibHndl, [Out, MarshalAs(UnmanagedType.AsAny)] Object a);
/* write the directory for M198 operation */
[DllImport("FWLIB32.dll", EntryPoint = "ds_wrm198hdddir")]
public static extern short ds_wrm198hdddir(ushort FlibHndl);
/* read the connecting host number for the M198 operation */
[DllImport("FWLIB32.dll", EntryPoint = "ds_rdm198host")]
public static extern short ds_rdm198host(ushort FlibHndl, out short a);
/* write the connecting host number for the M198 operation */
[DllImport("FWLIB32.dll", EntryPoint = "ds_wrm198host")]
public static extern short ds_wrm198host(ushort FlibHndl);
/* write the connecting host number */
[DllImport("FWLIB32.dll", EntryPoint = "ds_wrhostno")]
public static extern short ds_wrhostno(ushort FlibHndl, short a);
/* search string in data server program */
[DllImport("FWLIB32.dll", EntryPoint = "ds_searchword")]
public static extern short ds_searchword(ushort FlibHndl,
[In, MarshalAs(UnmanagedType.AsAny)] Object a);
/* read the searching result */
[DllImport("FWLIB32.dll", EntryPoint = "ds_searchresult")]
public static extern short ds_searchresult(ushort FlibHndl);
/* read file in the Data Server's HDD */
[DllImport("FWLIB32.dll", EntryPoint = "ds_rdfile")]
public static extern short ds_rdfile(ushort FlibHndl,
[In, MarshalAs(UnmanagedType.AsAny)] Object a,
[In, MarshalAs(UnmanagedType.AsAny)] Object b);
/* write file in the Data Server's HDD */
[DllImport("FWLIB32.dll", EntryPoint = "ds_wrfile")]
public static extern short ds_wrfile(ushort FlibHndl,
[In, MarshalAs(UnmanagedType.AsAny)] Object a,
[In, MarshalAs(UnmanagedType.AsAny)] Object b);
/*--------------------------*/
/* HSSB multiple connection */
/*--------------------------*/
/* read number of node */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdnodenum")]
public static extern short cnc_rdnodenum(out int a);
/* read node informations */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdnodeinfo")]
public static extern short cnc_rdnodeinfo(int a, [Out, MarshalAs(UnmanagedType.LPStruct)] ODBNODE b);
/* set default node number */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_setdefnode")]
public static extern short cnc_setdefnode(int a);
/* allocate library handle 2 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_allclibhndl2")]
public static extern short cnc_allclibhndl2(int node, out ushort FlibHndl);
/*---------------------*/
/* Ethernet connection */
/*---------------------*/
/* allocate library handle 3 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_allclibhndl3")]
public static extern short cnc_allclibhndl3([In, MarshalAs(UnmanagedType.AsAny)] Object ip,
ushort port, int timeout, out ushort FlibHndl);
/* allocate library handle 4 */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_allclibhndl4")]
public static extern short cnc_allclibhndl4([In, MarshalAs(UnmanagedType.AsAny)] Object ip,
ushort port, int timeout, uint id, out ushort FlibHndl);
/* set timeout for socket */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_settimeout")]
public static extern short cnc_settimeout(ushort FlibHndl, int a);
/* reset all socket connection */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_resetconnect")]
public static extern short cnc_resetconnect(ushort FlibHndl);
/* get option state for FOCAS1/Ethernet */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_getfocas1opt")]
public static extern short cnc_getfocas1opt(ushort FlibHndl, short a, out int b);
/* read Ethernet board information */
[DllImport("FWLIB32.dll", EntryPoint = "cnc_rdetherinfo")]
public static extern short cnc_rdetherinfo(ushort FlibHndl, out short a, out short b);
} // End for Focas1 class
好例子网口号：伸出你的我的手 — 分享！
小贴士
感谢您为本站写下的评论，您的评论对其它用户来说具有重要的参考价值，所以请认真填写。
- 类似“顶”、“沙发”之类没有营养的文字，对勤劳贡献的楼主来说是令人沮丧的反馈信息。
- 相信您也不想看到一排文字/表情墙，所以请不要反馈意义不大的重复字符，也请尽量不要纯表情的回复。
- 提问之前请再仔细看一遍楼主的说明，或许是您遗漏了。
- 请勿到处挖坑绊人、招贴广告。既占空间让人厌烦，又没人会搭理，于人于己都无利。
关于好例子网
本站旨在为广大IT学习爱好者提供一个非营利性互相学习交流分享平台。本站所有资源都可以被免费获取学习研究。本站资源来自网友分享，对搜索内容的合法性不具有预见性、识别性、控制性，仅供学习研究，请务必在下载后24小时内给予删除，不得用于其他任何用途，否则后果自负。基于互联网的特殊性，平台无法对用户传输的作品、信息、内容的权属或合法性、安全性、合规性、真实性、科学性、完整权、有效性等进行实质审查；无论平台是否已进行审查，用户均应自行承担因其传输的作品、信息、内容而可能或已经产生的侵权或权属纠纷等法律责任。本站所有资源不代表本站的观点或立场，基于网友分享，根据中国法律《信息网络传播权保护条例》第二十二与二十三条之规定，若资源存在侵权或相关问题请联系本站客服人员，点此联系我们。关于更多版权及免责申明参见 版权及免责申明
网友评论
我要评论