实例介绍
【实例简介】
PSS/E采用高效建模仿真技术，它包含了主框架和大量的子程序，在进行计算时，PSS/E主程序调用各个子程序模块，因此，PSS/E具有强大的计算能力及计算速度，目前PSS/E 33版本处理的电力网络的最大规模为15万条母线、30万条线路、30万个负荷以及3.3万台发电机。
C Copyright 1990-2015 Siemens Industry, Inc, Siemens Power Technologies International Information in this manual and any software described herein is confidential and subject to change without notice and does not represent a commitment on the part of Siemens Industry, InC, Siemens Power Technologies International. The software described in this manual is furnished under a license agreement or nondisclosure agreement and may be used or copied only in accordance with the terms of the agreement. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, for any purpose other than the purchaser's personal use, without the express written permission of Siemens Industry, Inc, Siemens Power Technologies International PSSE high-performance transmission planning software is a registered trademark of Siemens Industry, Inc, Siemens Power Technologies International in the United States and other countries The wir stem, the Windows vista@ operating system, the Windows 7@ operating system, the Visual C++ development system, Microsoft Office Excel and microsoft Visual Studio@ are registered trademarks of Microsoft Corporation in the United States and other countries Intele Visual Fortran Compiler for Windows is a trademark of Intel Corporation in the United states and other countries The Python M programming language is a trademark of the Python Software Foundation Other names may be trademarks of their respective owners SIEMENS Table Of Contents Part 1: The Working case Chapter 1-Introduction 1.1 Overview 1.2 Document Conventions 1-2 1.3 Startup options 13 1.4 Establishing the Working director 1-4 1.5 Changing Program Preferences 1.6 Defining the program size 1-11 1.7 Changing Program Settings 1-12 Activity OPTN 1.7.1 Extended bus names 112 1.8 Displaying and Resetting Timing Statistics ..1-14 Activity TIME 1. 9 The User Interface 1-15 1.9.1 Using the Command Line 118 1.10 Creating a Working case 1-19 1.11 Data Input 120 1.11.1 Resetting Dialog Options 1-21 1.11.2 Closing the application 1-21 Chapter 2-Spreadsheet view 2.1 Introduction 2.2 Editing and Formatting the Spreadsheet 2-3 2.2. 1 Menu options .2-3 2.2.2 Managing Columns 2-5 2.2.3 Header/Footer Setu 2. 2. 4 Page Setup 2-6 2.2.5 Print Setup 2-7 2.3 Network Spreadsheet 2-8 2.3. 1 Revising the Working Case 2-9 2.3.2 Creating a Bus Subsystem 29 2.3.3 Using the Subsystem Menu 2-10 2.4 EXporting Spreadsheet Data 2-13 2.5 Undoing an Action 2-14 All materia/ contained in this documentation is proprietary to Siemens Industry Inc, Siemens Power Technologies International SIEMENS PSSE 34 Chapter 3-Diagram View 3.1 Introduction 3.2 Specifying Diagram Properties 3-3 3.3 Creating a New Power Flow Case using Diagram view 3.3.1 Adding Buses 3-7 3.3.2 Adding Network Elements 3-8 3. 4 Opening or Importing Existing Diagram Files 3-11 3.4.1 Slider Diagram File .,,,3-11 3.4.2 Importing a DRAW File 3-11 Activity DRAW 3.4.3 Importing an Image File 3-11 3.5 Diagram Templates ..3-13 3.6 Revising a Diagram 3-14 3.6.1 Using Data Records 3-14 3.6.2 Using Diagram Menus 3-14 3.6.3 Editing Functions ...,.,,3-15 3.6.4 Binding data 3-16 3.6.5 Displaying and Modifying Network Elements 3-17 3.6.6 Drawing a missing bus ,,,.3-24 3.6.7 Renumbering Buses in the Diagram 3-24 3.6.8 Specifying Bus Locations from a File 3-24 3.6.9 Moving diagram Elements 3.6. 10 Changing Status 3-29 3.6.11 Displaying Iso Symbols 3-30 3.6. 12 Animating Flows 3-30 3.6.13 Viewing Current Loadings 3-31 3.6. 14 Multi-Section Line Reporting 3-32 3.6.15 tem Annotation 画翻着 .3-32 3. 6.16 Contouring ......3-38 3.6.17 Customizing Tooltips 3-44 3.7 Using Auto-Draw 3-46 3.7.1 Bus Orientation .3-48 3.8 Displaying Power Flow Results 3-49 3.8.1 Power flow annotation 3-49 3.8.2 Range Checking .:.·: ....3-51 3.8.3 Adding a Summation Record 3-54 3.8.4 Adding a Report Node 3-55 3.9 Displaying Impedance Data 357 3.9.1 Impedance Annotation 3-57 3.10 Displaying Graphical Difference Data 潘 3-59 Activity gDiF 3.10.1 Comparison Annotation 3-61 3.11 Creating a Bus Display .3-62 Activity GOUT/GEXM 3.11.1 Single Bus Display Labels and Symbols 3-63 All material contained in this documentation is proprietary to Siemens Industry Inc. Siemens Power Technologies International SIEMENS PSS 34 3.11.2 Navigating the Network Using the Single Bus Display 3-64 3.11.3 Converting Grow Mode ...3-65 3.12 Generating a Graphical Report ,,,,,,,,,,,,,3-67 Activity GRPG 3.13 Diagram Management ...,,,,,,,,,,...,3-69 3.13.2 Errors/Missing Items 3.13.1 Diagram Contents 3-69 3-69 3. 13.3 Diagram Layers 3-70 3.13. 4 Property Overrides :::::· .3-73 3.13.5 Cleaning the Diagram 3-73 3.14 Exporting Data 3-75 3.14.1 Image File 3.142 Bus location file 3-75 3.14.3 Google Earth Locations File ....3-75 3.15 Closing the diagram view 3-76 Chapter 4-Data Selection Tree view 4.1 Introduction 4.2 Network tree 4-2 4.3 OPF Tree 45 4.4 Dynamics Tree 4-6 4.5 Models tree 4-7 4.6 Plot tree 4-8 Chapter 5 - Tools 5. 1 Customizing Toolbars .5-2 5.2 Configuring Custom Toolbar Buttons 5-4 5.3 Creating Custom Toolbars ...,5-6 Part 2: PSSOExpress Activities Chapter 6-Power Flow Data Entry 6. 1 Retrieving a Power Flow Saved Case File 6-2 Activity CAsE 6.2 Listing Saved Case Filenames 6-3 Activity SHOW 6.3 Reading Power Flow Raw Data into the Working Case ..,,,6-4 6.3.1 Standard Data Input Activity READ 6.3.2 Subsystem Data Input 6-5 Activity READ All materia/ contained in this documentation is proprietary to Siemens Industry Inc, Siemens Power Technologies International SIEMENS PSSE 34 6.4 Reading / Changing Power Flow Data 6-7 Activity RICH 6.5 Selecting Extended Bus Name Input Format 6-9 6.6 Adding machine Impedance data 6-10 Activity McRE 6.7 Managing case Titles 6-11 6.7.1 Importing a Long Title 6-11 Activity RETI 6.7.2 Changing the case title and the long title ..6-12 Activity ChTI Chapter 7- Power Flow Data Modification 7.1 Changing Service Status and Power Flow Parametric Data 7-1 7.1.1 Inter-area Transfer Data Changes 7. 2 Electrically Disconnecting/Reconnecting a Bu 7-3 Activity DSCN/RECN 7.3 Joining buses Activity JOIN 7.3.1 JOIN Example 7-6 7.4 Splitting Buses ....... 7-10 Activity SPLT 7.5 Tapping a Line ..7-15 Activity LTAP 7.6 Changing Equipment Identifiers 7-20 Activity MBID 7.7 Moving equipment 7-21 Activity MovE 7.8 Removing Buses and Connected Equipment 7-26 Activity PURG/EXTR 7.8.1 Removing Buses .,,,,7-27 7.8.2 Removing Outaged Equipment .7-27 7. 9 Scaling Loads, Generators, and/or Shunts .7-29 Activity SCAL 7.10 Changing Adjustment Enable Flags of Transformers 7-32 Activity TFLG 7.11 Importing an ECDl Data File 7-33 7.12 Changing Area Assignments 7-34 Activity aRNm Activity LDaR All materia/ contained in this documentation is proprietary to Siemens Industry Inc, Siemens Power Technologies International SIEMENS PSS 34 7.13 Changing Owner Assignments .7-36 Activity OWNM 7. 14 Changing Zone Assignments 7-38 Activity ZONM Activity LAzO 7.15 Renumbering buses 7-41 Activity BSNM 7.15. 1 Renumbering buses by bus number 7-41 File Input 7-42 Dialog input 7-42 7.15.2 Renumbering Buses by name 7-42 File input 7-43 Dialog Input 7-43 7.15.3 Renumbering Buses by Packing 7-43 7.15. 4 Renumbering Buses By Subsystem 7-44 All Buses without Area Blocking ,.,7-45 All Buses with Area blocking 7-45 Subsystem Bus Number range ..7-46 Subsystem Bus Number Offset ,,,,,,,,,,,,7-47 7.16 Renumbering Buses in Auxiliary Data Files 7-48 Activity RNFl Chapter 8-Data Reports 8. 1 Working Case Data Reporting 8-1 8.1.1 Power flow data 8-2 Activity LIST 8.1.2 Listing Buses in Alphabetical OrdeR 8-3 Activity ALPH 8.1.3 Listing Buses and their Connected Equipment ...8-4 Activity EXAM 8.1.4 Outaged Equipment 8-4 Activity OUTS 8.1.5 Listing Bus S Activity SHNT 8.2 Listing File Information 8-6 8.2.1 System Components 8-6 Activity SIZE 8.2.2 Saved Case and Snapshot Filenames 8-7 Activity SHoW 8.2.3 Unused bus numbers 8-7 Activity BUSN All materia/ contained in this documentation is proprietary to Siemens Industry Inc, Siemens Power Technologies International SIEMENS PSSE 34 Chapter 9-Case Comparison 9.1 Comparing power flow case Totals 9-1 Activity CMPR 9.2 Comparing Power Flow Cases Activity DIFF 9.3 Comparing ac Tie Branches 9-6 Activity dFTl Chapter 10-Creating Power Flow Data Files 10.1 Creating a saved case file Activity SAVE 10.2 Saving the Working Case in an IEEE Common Format File 10-3 Activity rwcm 10.3 Saving machine impedance data 105 Activity RWma 10.4 Creating a power flow raw data File 10-7 Activity RAWd Chapter 11-Power Flow Solutions 11.1 Specifying Solution Parameters : 11-2 11.1.1 Boundary Conditions ....11-2 11.1.2 Gauss-Seidel Controls 11.1.3 Newton-Raphson Solution Controls 113 11.2 Running power Flow Solutions 11-5 11.2.1 Decoupled Newton-Raphson Power Flow Solution 11-5 Activity SOl 11.2.2 Fully-Coupled Newton-Raphson Power Flow Solution 11-7 Activity FNSL 11.2.3 Fixed Slope Decoupled Newton-Raphson Power Flow Solution 119 Activity FDNS 11.2.4 Newton-Raphson Power Flow Solution with Inertial /Governor Dispatch. 11-12 Activity INLF 11.2.5 Gauss-Seidel Power flow solution 11-14 Activity SOLV 11.2.6 Modified Gauss-Seidel Power flow Solution ..11-17 Activity MsV Chapter 12- Power Flow Data Verification 12. 1 Checking Branch Parameters 1· ....12-1 Activity brCH All materia/ contained in this documentation is proprietary to Siemens Industry Inc, Siemens Power Technologies International 【实例截图】
【核心代码】
PSS/E采用高效建模仿真技术，它包含了主框架和大量的子程序，在进行计算时，PSS/E主程序调用各个子程序模块，因此，PSS/E具有强大的计算能力及计算速度，目前PSS/E 33版本处理的电力网络的最大规模为15万条母线、30万条线路、30万个负荷以及3.3万台发电机。
C Copyright 1990-2015 Siemens Industry, Inc, Siemens Power Technologies International Information in this manual and any software described herein is confidential and subject to change without notice and does not represent a commitment on the part of Siemens Industry, InC, Siemens Power Technologies International. The software described in this manual is furnished under a license agreement or nondisclosure agreement and may be used or copied only in accordance with the terms of the agreement. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, for any purpose other than the purchaser's personal use, without the express written permission of Siemens Industry, Inc, Siemens Power Technologies International PSSE high-performance transmission planning software is a registered trademark of Siemens Industry, Inc, Siemens Power Technologies International in the United States and other countries The wir stem, the Windows vista@ operating system, the Windows 7@ operating system, the Visual C++ development system, Microsoft Office Excel and microsoft Visual Studio@ are registered trademarks of Microsoft Corporation in the United States and other countries Intele Visual Fortran Compiler for Windows is a trademark of Intel Corporation in the United states and other countries The Python M programming language is a trademark of the Python Software Foundation Other names may be trademarks of their respective owners SIEMENS Table Of Contents Part 1: The Working case Chapter 1-Introduction 1.1 Overview 1.2 Document Conventions 1-2 1.3 Startup options 13 1.4 Establishing the Working director 1-4 1.5 Changing Program Preferences 1.6 Defining the program size 1-11 1.7 Changing Program Settings 1-12 Activity OPTN 1.7.1 Extended bus names 112 1.8 Displaying and Resetting Timing Statistics ..1-14 Activity TIME 1. 9 The User Interface 1-15 1.9.1 Using the Command Line 118 1.10 Creating a Working case 1-19 1.11 Data Input 120 1.11.1 Resetting Dialog Options 1-21 1.11.2 Closing the application 1-21 Chapter 2-Spreadsheet view 2.1 Introduction 2.2 Editing and Formatting the Spreadsheet 2-3 2.2. 1 Menu options .2-3 2.2.2 Managing Columns 2-5 2.2.3 Header/Footer Setu 2. 2. 4 Page Setup 2-6 2.2.5 Print Setup 2-7 2.3 Network Spreadsheet 2-8 2.3. 1 Revising the Working Case 2-9 2.3.2 Creating a Bus Subsystem 29 2.3.3 Using the Subsystem Menu 2-10 2.4 EXporting Spreadsheet Data 2-13 2.5 Undoing an Action 2-14 All materia/ contained in this documentation is proprietary to Siemens Industry Inc, Siemens Power Technologies International SIEMENS PSSE 34 Chapter 3-Diagram View 3.1 Introduction 3.2 Specifying Diagram Properties 3-3 3.3 Creating a New Power Flow Case using Diagram view 3.3.1 Adding Buses 3-7 3.3.2 Adding Network Elements 3-8 3. 4 Opening or Importing Existing Diagram Files 3-11 3.4.1 Slider Diagram File .,,,3-11 3.4.2 Importing a DRAW File 3-11 Activity DRAW 3.4.3 Importing an Image File 3-11 3.5 Diagram Templates ..3-13 3.6 Revising a Diagram 3-14 3.6.1 Using Data Records 3-14 3.6.2 Using Diagram Menus 3-14 3.6.3 Editing Functions ...,.,,3-15 3.6.4 Binding data 3-16 3.6.5 Displaying and Modifying Network Elements 3-17 3.6.6 Drawing a missing bus ,,,.3-24 3.6.7 Renumbering Buses in the Diagram 3-24 3.6.8 Specifying Bus Locations from a File 3-24 3.6.9 Moving diagram Elements 3.6. 10 Changing Status 3-29 3.6.11 Displaying Iso Symbols 3-30 3.6. 12 Animating Flows 3-30 3.6.13 Viewing Current Loadings 3-31 3.6. 14 Multi-Section Line Reporting 3-32 3.6.15 tem Annotation 画翻着 .3-32 3. 6.16 Contouring ......3-38 3.6.17 Customizing Tooltips 3-44 3.7 Using Auto-Draw 3-46 3.7.1 Bus Orientation .3-48 3.8 Displaying Power Flow Results 3-49 3.8.1 Power flow annotation 3-49 3.8.2 Range Checking .:.·: ....3-51 3.8.3 Adding a Summation Record 3-54 3.8.4 Adding a Report Node 3-55 3.9 Displaying Impedance Data 357 3.9.1 Impedance Annotation 3-57 3.10 Displaying Graphical Difference Data 潘 3-59 Activity gDiF 3.10.1 Comparison Annotation 3-61 3.11 Creating a Bus Display .3-62 Activity GOUT/GEXM 3.11.1 Single Bus Display Labels and Symbols 3-63 All material contained in this documentation is proprietary to Siemens Industry Inc. Siemens Power Technologies International SIEMENS PSS 34 3.11.2 Navigating the Network Using the Single Bus Display 3-64 3.11.3 Converting Grow Mode ...3-65 3.12 Generating a Graphical Report ,,,,,,,,,,,,,3-67 Activity GRPG 3.13 Diagram Management ...,,,,,,,,,,...,3-69 3.13.2 Errors/Missing Items 3.13.1 Diagram Contents 3-69 3-69 3. 13.3 Diagram Layers 3-70 3.13. 4 Property Overrides :::::· .3-73 3.13.5 Cleaning the Diagram 3-73 3.14 Exporting Data 3-75 3.14.1 Image File 3.142 Bus location file 3-75 3.14.3 Google Earth Locations File ....3-75 3.15 Closing the diagram view 3-76 Chapter 4-Data Selection Tree view 4.1 Introduction 4.2 Network tree 4-2 4.3 OPF Tree 45 4.4 Dynamics Tree 4-6 4.5 Models tree 4-7 4.6 Plot tree 4-8 Chapter 5 - Tools 5. 1 Customizing Toolbars .5-2 5.2 Configuring Custom Toolbar Buttons 5-4 5.3 Creating Custom Toolbars ...,5-6 Part 2: PSSOExpress Activities Chapter 6-Power Flow Data Entry 6. 1 Retrieving a Power Flow Saved Case File 6-2 Activity CAsE 6.2 Listing Saved Case Filenames 6-3 Activity SHOW 6.3 Reading Power Flow Raw Data into the Working Case ..,,,6-4 6.3.1 Standard Data Input Activity READ 6.3.2 Subsystem Data Input 6-5 Activity READ All materia/ contained in this documentation is proprietary to Siemens Industry Inc, Siemens Power Technologies International SIEMENS PSSE 34 6.4 Reading / Changing Power Flow Data 6-7 Activity RICH 6.5 Selecting Extended Bus Name Input Format 6-9 6.6 Adding machine Impedance data 6-10 Activity McRE 6.7 Managing case Titles 6-11 6.7.1 Importing a Long Title 6-11 Activity RETI 6.7.2 Changing the case title and the long title ..6-12 Activity ChTI Chapter 7- Power Flow Data Modification 7.1 Changing Service Status and Power Flow Parametric Data 7-1 7.1.1 Inter-area Transfer Data Changes 7. 2 Electrically Disconnecting/Reconnecting a Bu 7-3 Activity DSCN/RECN 7.3 Joining buses Activity JOIN 7.3.1 JOIN Example 7-6 7.4 Splitting Buses ....... 7-10 Activity SPLT 7.5 Tapping a Line ..7-15 Activity LTAP 7.6 Changing Equipment Identifiers 7-20 Activity MBID 7.7 Moving equipment 7-21 Activity MovE 7.8 Removing Buses and Connected Equipment 7-26 Activity PURG/EXTR 7.8.1 Removing Buses .,,,,7-27 7.8.2 Removing Outaged Equipment .7-27 7. 9 Scaling Loads, Generators, and/or Shunts .7-29 Activity SCAL 7.10 Changing Adjustment Enable Flags of Transformers 7-32 Activity TFLG 7.11 Importing an ECDl Data File 7-33 7.12 Changing Area Assignments 7-34 Activity aRNm Activity LDaR All materia/ contained in this documentation is proprietary to Siemens Industry Inc, Siemens Power Technologies International SIEMENS PSS 34 7.13 Changing Owner Assignments .7-36 Activity OWNM 7. 14 Changing Zone Assignments 7-38 Activity ZONM Activity LAzO 7.15 Renumbering buses 7-41 Activity BSNM 7.15. 1 Renumbering buses by bus number 7-41 File Input 7-42 Dialog input 7-42 7.15.2 Renumbering Buses by name 7-42 File input 7-43 Dialog Input 7-43 7.15.3 Renumbering Buses by Packing 7-43 7.15. 4 Renumbering Buses By Subsystem 7-44 All Buses without Area Blocking ,.,7-45 All Buses with Area blocking 7-45 Subsystem Bus Number range ..7-46 Subsystem Bus Number Offset ,,,,,,,,,,,,7-47 7.16 Renumbering Buses in Auxiliary Data Files 7-48 Activity RNFl Chapter 8-Data Reports 8. 1 Working Case Data Reporting 8-1 8.1.1 Power flow data 8-2 Activity LIST 8.1.2 Listing Buses in Alphabetical OrdeR 8-3 Activity ALPH 8.1.3 Listing Buses and their Connected Equipment ...8-4 Activity EXAM 8.1.4 Outaged Equipment 8-4 Activity OUTS 8.1.5 Listing Bus S Activity SHNT 8.2 Listing File Information 8-6 8.2.1 System Components 8-6 Activity SIZE 8.2.2 Saved Case and Snapshot Filenames 8-7 Activity SHoW 8.2.3 Unused bus numbers 8-7 Activity BUSN All materia/ contained in this documentation is proprietary to Siemens Industry Inc, Siemens Power Technologies International SIEMENS PSSE 34 Chapter 9-Case Comparison 9.1 Comparing power flow case Totals 9-1 Activity CMPR 9.2 Comparing Power Flow Cases Activity DIFF 9.3 Comparing ac Tie Branches 9-6 Activity dFTl Chapter 10-Creating Power Flow Data Files 10.1 Creating a saved case file Activity SAVE 10.2 Saving the Working Case in an IEEE Common Format File 10-3 Activity rwcm 10.3 Saving machine impedance data 105 Activity RWma 10.4 Creating a power flow raw data File 10-7 Activity RAWd Chapter 11-Power Flow Solutions 11.1 Specifying Solution Parameters : 11-2 11.1.1 Boundary Conditions ....11-2 11.1.2 Gauss-Seidel Controls 11.1.3 Newton-Raphson Solution Controls 113 11.2 Running power Flow Solutions 11-5 11.2.1 Decoupled Newton-Raphson Power Flow Solution 11-5 Activity SOl 11.2.2 Fully-Coupled Newton-Raphson Power Flow Solution 11-7 Activity FNSL 11.2.3 Fixed Slope Decoupled Newton-Raphson Power Flow Solution 119 Activity FDNS 11.2.4 Newton-Raphson Power Flow Solution with Inertial /Governor Dispatch. 11-12 Activity INLF 11.2.5 Gauss-Seidel Power flow solution 11-14 Activity SOLV 11.2.6 Modified Gauss-Seidel Power flow Solution ..11-17 Activity MsV Chapter 12- Power Flow Data Verification 12. 1 Checking Branch Parameters 1· ....12-1 Activity brCH All materia/ contained in this documentation is proprietary to Siemens Industry Inc, Siemens Power Technologies International 【实例截图】
【核心代码】
标签：
好例子网口号：伸出你的我的手 — 分享！
小贴士
感谢您为本站写下的评论，您的评论对其它用户来说具有重要的参考价值，所以请认真填写。
- 类似“顶”、“沙发”之类没有营养的文字，对勤劳贡献的楼主来说是令人沮丧的反馈信息。
- 相信您也不想看到一排文字/表情墙，所以请不要反馈意义不大的重复字符，也请尽量不要纯表情的回复。
- 提问之前请再仔细看一遍楼主的说明，或许是您遗漏了。
- 请勿到处挖坑绊人、招贴广告。既占空间让人厌烦，又没人会搭理，于人于己都无利。
关于好例子网
本站旨在为广大IT学习爱好者提供一个非营利性互相学习交流分享平台。本站所有资源都可以被免费获取学习研究。本站资源来自网友分享，对搜索内容的合法性不具有预见性、识别性、控制性，仅供学习研究，请务必在下载后24小时内给予删除，不得用于其他任何用途，否则后果自负。基于互联网的特殊性，平台无法对用户传输的作品、信息、内容的权属或合法性、安全性、合规性、真实性、科学性、完整权、有效性等进行实质审查；无论平台是否已进行审查，用户均应自行承担因其传输的作品、信息、内容而可能或已经产生的侵权或权属纠纷等法律责任。本站所有资源不代表本站的观点或立场，基于网友分享，根据中国法律《信息网络传播权保护条例》第二十二与二十三条之规定，若资源存在侵权或相关问题请联系本站客服人员，点此联系我们。关于更多版权及免责申明参见 版权及免责申明
网友评论
我要评论