实例介绍
【实例简介】
【实例截图】
【核心代码】
using System;
using System.IO.Ports;
using System.Net;
using System.Net.Sockets;
using System.Threading;
using Modbus.Data;
using Modbus.Device;
using Modbus.Utility;
namespace MySample
{
/// <summary>
/// Demonstration of NModbus
/// </summary>
public class Driver
{
private static void Main(string[] args)
{
log4net.Config.XmlConfigurator.Configure();
try
{
//ModbusTcpMasterReadInputs();
//SimplePerfTest();
//ModbusSerialRtuMasterWriteRegisters();
//ModbusSerialAsciiMasterReadRegisters();
//ModbusTcpMasterReadInputs();
//StartModbusAsciiSlave();
//ModbusTcpMasterReadInputsFromModbusSlave();
//ModbusSerialAsciiMasterReadRegistersFromModbusSlave();
//StartModbusTcpSlave();
//StartModbusUdpSlave();
//StartModbusAsciiSlave();
}
catch (Exception e)
{
Console.WriteLine(e.Message);
}
Console.ReadKey();
}
/// <summary>
/// Simple Modbus serial RTU master write holding registers example.
/// </summary>
public static void ModbusSerialRtuMasterWriteRegisters()
{
using (SerialPort port = new SerialPort("COM1"))
{
// configure serial port
port.BaudRate = 9600;
port.DataBits = 8;
port.Parity = Parity.None;
port.StopBits = StopBits.One;
port.Open();
// create modbus master
IModbusSerialMaster master = ModbusSerialMaster.CreateRtu(port);
byte slaveId = 1;
ushort startAddress = 100;
ushort[] registers = new ushort[] { 1, 2, 3 };
// write three registers
master.WriteMultipleRegisters(slaveId, startAddress, registers);
}
}
/// <summary>
/// Simple Modbus serial ASCII master read holding registers example.
/// </summary>
public static void ModbusSerialAsciiMasterReadRegisters()
{
using (SerialPort port = new SerialPort("COM1"))
{
// configure serial port
port.BaudRate = 9600;
port.DataBits = 8;
port.Parity = Parity.None;
port.StopBits = StopBits.One;
port.Open();
// create modbus master
IModbusSerialMaster master = ModbusSerialMaster.CreateAscii(port);
byte slaveId = 1;
ushort startAddress = 1;
ushort numRegisters = 5;
// read five registers
ushort[] registers = master.ReadHoldingRegisters(slaveId, startAddress, numRegisters);
for (int i = 0; i < numRegisters; i )
{
Console.WriteLine($"Register {startAddress i}={registers[i]}");
}
}
// output:
// Register 1=0
// Register 2=0
// Register 3=0
// Register 4=0
// Register 5=0
}
/// <summary>
/// Simple Modbus TCP master read inputs example.
/// </summary>
public static void ModbusTcpMasterReadInputs()
{
using (TcpClient client = new TcpClient("127.0.0.1", 502))
{
ModbusIpMaster master = ModbusIpMaster.CreateIp(client);
// read five input values
ushort startAddress = 100;
ushort numInputs = 5;
bool[] inputs = master.ReadInputs(startAddress, numInputs);
for (int i = 0; i < numInputs; i )
{
Console.WriteLine($"Input {(startAddress i)}={(inputs[i] ? 1 : 0)}");
}
}
// output:
// Input 100=0
// Input 101=0
// Input 102=0
// Input 103=0
// Input 104=0
}
/// <summary>
/// Simple Modbus UDP master write coils example.
/// </summary>
public static void ModbusUdpMasterWriteCoils()
{
using (UdpClient client = new UdpClient())
{
IPEndPoint endPoint = new IPEndPoint(new IPAddress(new byte[] { 127, 0, 0, 1 }), 502);
client.Connect(endPoint);
ModbusIpMaster master = ModbusIpMaster.CreateIp(client);
ushort startAddress = 1;
// write three coils
master.WriteMultipleCoils(startAddress, new bool[] { true, false, true });
}
}
/// <summary>
/// Simple Modbus serial ASCII slave example.
/// </summary>
public static void StartModbusSerialAsciiSlave()
{
using (SerialPort slavePort = new SerialPort("COM2"))
{
// configure serial port
slavePort.BaudRate = 9600;
slavePort.DataBits = 8;
slavePort.Parity = Parity.None;
slavePort.StopBits = StopBits.One;
slavePort.Open();
byte unitId = 1;
// create modbus slave
ModbusSlave slave = ModbusSerialSlave.CreateAscii(unitId, slavePort);
slave.DataStore = DataStoreFactory.CreateDefaultDataStore();
slave.Listen();
}
}
/// <summary>
/// Simple Modbus serial RTU slave example.
/// </summary>
public static void StartModbusSerialRtuSlave()
{
using (SerialPort slavePort = new SerialPort("COM2"))
{
// configure serial port
slavePort.BaudRate = 9600;
slavePort.DataBits = 8;
slavePort.Parity = Parity.None;
slavePort.StopBits = StopBits.One;
slavePort.Open();
byte unitId = 1;
// create modbus slave
ModbusSlave slave = ModbusSerialSlave.CreateRtu(unitId, slavePort);
slave.DataStore = DataStoreFactory.CreateDefaultDataStore();
slave.Listen();
}
}
/// <summary>
/// Simple Modbus serial USB ASCII slave example.
/// </summary>
public static void StartModbusSerialUsbAsciiSlave()
{
// TODO
}
/// <summary>
/// Simple Modbus serial USB RTU slave example.
/// </summary>
public static void StartModbusSerialUsbRtuSlave()
{
// TODO
}
/// <summary>
/// Simple Modbus TCP slave example.
/// </summary>
public static void StartModbusTcpSlave()
{
byte slaveId = 1;
int port = 502;
IPAddress address = new IPAddress(new byte[] { 127, 0, 0, 1 });
// create and start the TCP slave
TcpListener slaveTcpListener = new TcpListener(address, port);
slaveTcpListener.Start();
ModbusSlave slave = ModbusTcpSlave.CreateTcp(slaveId, slaveTcpListener);
slave.DataStore = DataStoreFactory.CreateDefaultDataStore();
slave.Listen();
// prevent the main thread from exiting
Thread.Sleep(Timeout.Infinite);
}
/// <summary>
/// Simple Modbus UDP slave example.
/// </summary>
public static void StartModbusUdpSlave()
{
using (UdpClient client = new UdpClient(502))
{
ModbusUdpSlave slave = ModbusUdpSlave.CreateUdp(client);
slave.DataStore = DataStoreFactory.CreateDefaultDataStore();
slave.Listen();
// prevent the main thread from exiting
Thread.Sleep(Timeout.Infinite);
}
}
/// <summary>
/// Modbus TCP master and slave example.
/// </summary>
public static void ModbusTcpMasterReadInputsFromModbusSlave()
{
byte slaveId = 1;
int port = 502;
IPAddress address = new IPAddress(new byte[] { 127, 0, 0, 1 });
// create and start the TCP slave
TcpListener slaveTcpListener = new TcpListener(address, port);
slaveTcpListener.Start();
ModbusSlave slave = ModbusTcpSlave.CreateTcp(slaveId, slaveTcpListener);
Thread slaveThread = new Thread(slave.Listen);
slaveThread.Start();
// create the master
TcpClient masterTcpClient = new TcpClient(address.ToString(), port);
ModbusIpMaster master = ModbusIpMaster.CreateIp(masterTcpClient);
ushort numInputs = 5;
ushort startAddress = 100;
// read five register values
ushort[] inputs = master.ReadInputRegisters(startAddress, numInputs);
for (int i = 0; i < numInputs; i )
{
Console.WriteLine($"Register {(startAddress i)}={(inputs[i])}");
}
// clean up
masterTcpClient.Close();
slaveTcpListener.Stop();
// output
// Register 100=0
// Register 101=0
// Register 102=0
// Register 103=0
// Register 104=0
}
/// <summary>
/// Modbus serial ASCII master and slave example.
/// </summary>
public static void ModbusSerialAsciiMasterReadRegistersFromModbusSlave()
{
using (SerialPort masterPort = new SerialPort("COM1"))
using (SerialPort slavePort = new SerialPort("COM2"))
{
// configure serial ports
masterPort.BaudRate = slavePort.BaudRate = 9600;
masterPort.DataBits = slavePort.DataBits = 8;
masterPort.Parity = slavePort.Parity = Parity.None;
masterPort.StopBits = slavePort.StopBits = StopBits.One;
masterPort.Open();
slavePort.Open();
// create modbus slave on seperate thread
byte slaveId = 1;
ModbusSlave slave = ModbusSerialSlave.CreateAscii(slaveId, slavePort);
Thread slaveThread = new Thread(new ThreadStart(slave.Listen));
slaveThread.Start();
// create modbus master
ModbusSerialMaster master = ModbusSerialMaster.CreateAscii(masterPort);
master.Transport.Retries = 5;
ushort startAddress = 100;
ushort numRegisters = 5;
// read five register values
ushort[] registers = master.ReadHoldingRegisters(slaveId, startAddress, numRegisters);
for (int i = 0; i < numRegisters; i )
{
Console.WriteLine($"Register {(startAddress i)}={registers[i]}");
}
}
// output
// Register 100=0
// Register 101=0
// Register 102=0
// Register 103=0
// Register 104=0
}
/// <summary>
/// Write a 32 bit value.
/// </summary>
public static void ReadWrite32BitValue()
{
using (SerialPort port = new SerialPort("COM1"))
{
// configure serial port
port.BaudRate = 9600;
port.DataBits = 8;
port.Parity = Parity.None;
port.StopBits = StopBits.One;
port.Open();
// create modbus master
ModbusSerialMaster master = ModbusSerialMaster.CreateRtu(port);
byte slaveId = 1;
ushort startAddress = 1008;
uint largeValue = UInt16.MaxValue 5;
ushort lowOrderValue = BitConverter.ToUInt16(BitConverter.GetBytes(largeValue), 0);
ushort highOrderValue = BitConverter.ToUInt16(BitConverter.GetBytes(largeValue), 2);
// write large value in two 16 bit chunks
master.WriteMultipleRegisters(slaveId, startAddress, new ushort[] { lowOrderValue, highOrderValue });
// read large value in two 16 bit chunks and perform conversion
ushort[] registers = master.ReadHoldingRegisters(slaveId, startAddress, 2);
uint value = ModbusUtility.GetUInt32(registers[1], registers[0]);
}
}
}
}
好例子网口号：伸出你的我的手 — 分享！
相关软件
小贴士
感谢您为本站写下的评论，您的评论对其它用户来说具有重要的参考价值，所以请认真填写。
- 类似“顶”、“沙发”之类没有营养的文字，对勤劳贡献的楼主来说是令人沮丧的反馈信息。
- 相信您也不想看到一排文字/表情墙，所以请不要反馈意义不大的重复字符，也请尽量不要纯表情的回复。
- 提问之前请再仔细看一遍楼主的说明，或许是您遗漏了。
- 请勿到处挖坑绊人、招贴广告。既占空间让人厌烦，又没人会搭理，于人于己都无利。
关于好例子网
本站旨在为广大IT学习爱好者提供一个非营利性互相学习交流分享平台。本站所有资源都可以被免费获取学习研究。本站资源来自网友分享，对搜索内容的合法性不具有预见性、识别性、控制性，仅供学习研究，请务必在下载后24小时内给予删除，不得用于其他任何用途，否则后果自负。基于互联网的特殊性，平台无法对用户传输的作品、信息、内容的权属或合法性、安全性、合规性、真实性、科学性、完整权、有效性等进行实质审查；无论平台是否已进行审查，用户均应自行承担因其传输的作品、信息、内容而可能或已经产生的侵权或权属纠纷等法律责任。本站所有资源不代表本站的观点或立场，基于网友分享，根据中国法律《信息网络传播权保护条例》第二十二与二十三条之规定，若资源存在侵权或相关问题请联系本站客服人员，点此联系我们。关于更多版权及免责申明参见 版权及免责申明
网友评论
我要评论